Abstract:The objective of this study was to investigate the effects of enzymatic hydrolysis using α-amylase from Bacillus amyloliquefaciens on the mechanical properties of starch-based films. The process parameters of enzymatic hydrolysis and the degree of hydrolysis (DH) were optimized using a Box–Behnken design (BBD) and response surface methodology (RSM). The mechanical properties of the resulting hydrolyzed corn starch films (tensile strain at break, tensile stress at break, and Young's modulus) were evaluated. The results showed that the optimum DH for hydrolyzed corn starch films to achieve improved mechanical properties of the film-forming solutions was achieved at a corn starch to water ratio of 1:2.8, an enzyme to substrate ratio of 357 U/g, and an incubation temperature of 48 °C. Under the optimized conditions, the hydrolyzed corn starch film had a higher water absorption index of 2.32 ± 0.112% compared to the native corn starch film (control) of 0.81 ± 0.352%. The hydrolyzed corn starch films were more transparent than the control sample, with a light transmission of 78.5 ± 0.121% per mm. Fourier-transformed infrared spectroscopy (FTIR) analysis showed that the enzymatically hydrolyzed corn starch films had a more compact and solid structure in terms of molecular bonds, and the contact angle was also higher, at 79.21 ± 0.171° for this sample. The control sample had a higher melting point than the hydrolyzed corn starch film, as indicated by the significant difference in the temperature of the first endothermic event between the two films. The atomic force microscopy (AFM) characterization of the hydrolyzed corn starch film showed intermediate surface roughness. A comparison of the data from the two samples showed that the hydrolyzed corn starch film had better mechanical properties than the control sample, with a greater change in the storage modulus over a wider temperature range and higher values for the loss modulus and tan delta, indicating that the hydrolyzed corn starch film had better energy dissipation properties, as shown by thermal analysis. The improved mechanical properties of the resulting film of hydrolyzed corn starch were attributed to the enzymatic hydrolysis process, which breaks the starch molecules into smaller units, resulting in increased chain flexibility, improved film-forming ability, and stronger intermolecular bonds.

Functional characterization of edible films based on reactive extrusion acetylated corn starch

Edible starch films enhanced using CaCO3 nanoparticles and plasticizers by optimized extrusion-casting process

Effects of Starches from Different Botanical Sources and Modification Methods on Physicochemical Properties of Starch-Based Edible Films

Physical, barrier, and thermal properties characterization of edible films from composite mixtures of starch and starch derivatives

Influence of Different Commercial Modified Cassava Starches on the Physicochemical Properties of Thermoplastic Edible Films Obtained by Flat‐Die Extrusion

Development of anchote (Coccinia abyssinica) starch-based edible film: response surface modeling and interactive analysis of composition for water vapor permeability

Reactive extrusion-processed native and phosphated starch-based food packaging films governed by the hierarchical structure

Potential Agricultural Mulch Films Based on Native and Phosphorylated Corn Starch With and Without Surface Functionalization with Chitosan

Edible and Biodegradable Starch Films: A Review

An overview on plasticized biodegradable corn starch-based films: the physicochemical properties and gelatinization process

Development of Edible Films Based on Nostoc and Modified Native Potato Starch and Their Physical, Mechanical, Thermal, and Microscopic Characterization

Preparation and Chemical and Physical Characteristics of an Edible Film Based on Native Potato Starch and Nopal Mucilage

Influence of Starch Composition and Molecular Weight on Physicochemical Properties of Biodegradable Films

Enhancing the Mechanical Properties of Corn Starch Films for Sustainable Food Packaging by Optimizing Enzymatic Hydrolysis

Effect of the Addition of Corn Husk Cellulose Nanocrystals in the Development of a Novel Edible Film

Physical, thermal, morphological, and tensile properties of cornstarch-based films as affected by different plasticizers

Purification of Arabinoxylans from Corn Fiber and Preparation of Bioactive Films for Food Packaging

Substituting corn starch with wolf's fruit and butterfly lily starches in thermopressed films: Physicochemical, mechanical, and biodegradation properties

How Glycerol and Water Contents Affect the Structural and Functional Properties of Starch-Based Edible Films

Effect of starch type on the physico-chemical properties of edible films

Formulation and characterization of starch-based novel biodegradable edible films for food packaging