Abstract:This study proposes a novel, high-efficiency, self-condensing transcritical carbon dioxide (tCO 2 ) cycle utilizing a vortex tube, aimed at resolving the condensation issues within tCO 2 cycles to broaden their applicability. Firstly, the thermodynamic model of the proposed cycle was established and validated based on the first and second laws of thermodynamics. Secondly, under the basic operating conditions, this cycle demonstrates energy and exergy efficiencies of 42.00 % and 66.10 %, respectively. These efficiencies surpass those of the current self-condensing tCO 2 cycle with a vortex tube by 6.50 % and 8.85 %, the supercritical carbon dioxide (sCO 2 ) recompression cycle by 0.28 % and 0.55 %, and the sCO 2 simple recuperation cycle by 7.12 % and 9.84 %, under identical conditions. Compared to the three cycles mentioned above, our proposed cycle prevents condensation at the compressor impeller inlet due to near-critical point compression, simplifying pressurization equipment development and enhancing its stability and lifespan. Exergy analysis reveals that the turbine incurs the highest exergy losses in the system, followed by the high-temperature recuperator (HTR) and the high-pressure ratio compressor (HRC). Lastly, by using the method of controlled variables, the study explored how key operational parameters affect the performance of the proposed cycle. The results show that raising the turbine inlet temperature and the vortex tube outlet pressure significantly improves the cycle's efficiency. Optimal split ratios and optimal turbine inlet pressures were identified; notably, variations in the split ratio influence the pinch point location within the low-temperature recuperator (LTR). The impact of the vortex tube inlet temperature and pressure on the efficiency of the proposed cycle is primarily through their effect on the quality of the fluid at the nozzle outlet of the vortex tube. As the vortex tube inlet temperature approaches the critical temperature, the quality of the working fluid at the nozzle outlet decreases, the condensation performance of the vortex tube improves. As the vortex tube inlet pressure approaches the critical pressure, the quality of the fluid changes more significantly with variations in the inlet temperature.

Wave rotor as a pressure exchanger for lower rotational speed and lower shaft work in a supercritical carbon dioxide Brayton cycle

Experimental and Numerical Study on Thermal Hydraulic Performance of Trapezoidal Printed Circuit Heat Exchanger for Supercritical CO2 Brayton Cycle

CFD Simulation of a Supercritical CO2 Rolling Rotor Expander for Waste Heat Recovery System of Engines

Aerodynamic Optimization Design of a 150 kW High Performance Supercritical Carbon Dioxide Centrifugal Compressor without a High Speed Requirement

Design optimization and off-design performance analysis of one-dimensional supercritical CO 2 Brayton cycle

Design Optimization and Off-Design Performance Analysis of One-Dimensional Supercritical CO2 Brayton Cycle

Optimization of Supercritical Carbon Dioxide Recompression Brayton Cycle Considering Anti-Condensation Design of Centrifugal Compressor

Numerical Study on Rotor Cooling of Turbine in Supercritical Carbon Dioxide Cycle

Thermal Design and CFD Analysis of the Radial Inflow Turbine for a CO 2 ‐based Mixture Transcritical Rankine Cycle

Challenges for Developing and Marketing a Brayton-Cycle Based Power Genset Gas-Turbine Using Supercritical CO2 and a Compressor Design for Simple Recuperated Cycle

Transcritical / Supercritical CO2 Recompression Brayton Cycle Using a Novel Rotary Liquid Piston Compressor

Numerical Investigation of Flow Characteristics in a Supercritical Carbon Dioxide Turbine for 20 Megawatt Brayton Cycle

Thermo-economic analysis and multi-objective optimization of supercritical Brayton cycles with CO2-based mixtures

Thermodynamic Design and Aerodynamic Analysis of Supercritical Carbon Dioxide Turbine

An adaptive CO 2 Brayton-Rankine power cycle for efficient utilization of low environment temperature: A thermodynamic analysis and optimization study

Direction for High-Performance Supercritical CO2 Centrifugal Compressor Design for Dry Cooled Supercritical CO2 Brayton Cycle

Design a cooling pillow to support a high-speed supercritical CO2 turbine shaft

Analysis on thermodynamic and economic performances of supercritical carbon dioxide Brayton cycle with the dynamic component models and constraint conditions

Control of Supercritical CO2 Brayton Cycle for Fast and Efficient Load Variation Processes

Aerodynamic Design and Numerical Analysis of a Radial Inflow Turbine for the Supercritical Carbon Dioxide Brayton Cycle

Thermodynamic assessment of a novel and efficient self-condensing transcritical CO 2 power cycle with a vortex tube