Influence of tool pin geometry on the thermal processes and plastic material flow in ultrasonic vibration–enhanced friction stir welding

Xue Wang,Yichen Xiao,Lei Shi,Chuansong Wu,Huijie Liu

DOI: https://doi.org/10.1007/s00170-022-10650-0

2022-12-18

Abstract:Ultrasonic vibration–enhanced friction stir welding (UVeFSW) possesses the advantages of improving the welding quality and reducing welding loads as a novel variant of conventional friction stir welding (FSW). The tool pin geometry determines the final joint properties by affecting the welding temperature and material flow behaviors in the novel UVeFSW. However, there is a lack of quantitatively analyzing the effects of tool pin geometry on heat and mass transfer during UVeFSW. Thus, an integrated computational fluid dynamics model was used to elucidate the effects of tool pin geometry (i.e., pin diameter and taper angle) on the heat generation, temperature field, plastic material flow, and welding loads in UVeFSW. It revealed that the pin diameter and taper angle have little influence on the total heat generation in the UVeFSW process, whereas they significantly affect the temperature field near the tool by affecting the pin heat generation fraction. Although the total torque and transverse force did not significantly vary with the pin diameter, the torque and force acting on the tool pin severely increase with an increase in pin diameter resulting in a higher fraction of pin torque and force. Furthermore, the plastic material flow behaviors were severely affected by the tool geometry due to different torque and transverse forces acting on the tool pin. The model was verified by experimental thermal cycles and weld cross-section. It provides a basis for optimizing the tool pin diameter and its taper angle in the UVeFSW process.