Abstract:With the increase in rotor sizes, the implementation of innovative pitch control strategies, and the first floating solutions entering the market, the importance of unsteady aerodynamic phenomena in the operation of modern offshore wind turbines has increased significantly. Including aerodynamic unsteadiness in blade element momentum (BEM) methods used to simulate wind turbine design envelopes requires specific sub-models. One of them is the dynamic inflow model, which attempts to reproduce the effects of the unsteady wake evolution on the rotor plane induction. Although several models have been proposed, the lack of a consistent and comprehensive comparison makes their relative performance in the simulation of large rotors still uncertain. More importantly, different dynamic inflow model predictions have never been compared for a standard fatigue load case, and thus it is not clear what their impact on the design loads estimated with BEM is. The present study contributes to filling these gaps by implementing all the main dynamic inflow models in a single solver and comparing their relative performance on a 220 m diameter offshore rotor design. Results are compared for simple prescribed blade pitch time histories in uniform inflow conditions first, verifying the predictions against a high-fidelity free-vortex-wake model and showing the benefit of new two-constant models. Then the effect of shed vorticity is investigated in detail, revealing its major contribution to the observed differences between BEM and free-vortex results. Finally, the simulation of a standard fatigue load case prescribing the same blade pitch and rotor speed time histories reveals that including a dynamic inflow model in BEM tends to increase the fatigue load predictions compared to a quasi-steady BEM approach, while the relative differences among the models are limited.

Dynamic inflow and unsteady aerodynamics models for modal and stability analyses in OpenFAST

Development and Validation of the IAG Dynamic Stall Model in State-Space Representation for Wind Turbine Airfoils

A Combined Method of CFD Simulation and Modified Beddoes-Leishman Model to Predict the Dynamic Stall Characterizations of S809 Airfoil

Validation of an Actuator Line Model Coupled to a Dynamic Stall Model for Pitching Motions Characteristic to Vertical Axis Turbines

The Beddoes-Leishman dynamic stall model: Critical aspects in implementation and calibration

Analysis of dynamic stall development on a cross-flow turbine blade

Stochastic Model for Aerodynamic Force Dynamics on Wind Turbine Blades in Unsteady Wind Inflow

Modeling unsteady loads on wind-turbine blade sections from periodic structural oscillations and impinging gusts

Timescales of dynamic stall development on a vertical-axis wind turbine blade

Dynamic stall of an airfoil under tailored three-dimensional inflow conditions

Impacts of dynamic stall on engineering model predictions of wind turbines loads under design load cases

Aerodynamic Prediction of High-Lift Configuration Using K−v2¯−ω Turbulence Model

A comparison of dynamic inflow models for the blade element momentum method

Impact of Aerodynamic Modeling Assumptions on Flutter Speeds of Vertical-Axis Wind Turbines

OC6 phase I: Improvements to the OpenFAST predictions of nonlinear, low-frequency responses of a floating offshore wind turbine platform

An improved dynamic model for wind-turbine wake flow

Enhancement of Unsteady and 3D Aerodynamics Models using Machine Learning

Several Modifications to Improve Numerical Stability of Leishmen-Beddoes Dynamic Stall Model

Aeroelastic analysis of wind turbine under diverse inflow conditions

Data assimilation and linear analysis with turbulence modelling: application to airfoil stall flows with PIV measurements

An Open-Source Frequency-Domain Model for Floating Wind Turbine Design Optimization