Abstract:Iron ore tailings (IOTs), a typical hazardous solid waste, seriously threaten human health and the ecological environment. However, the abundance of quartz, particularly in high-silica IOTs, renders them useful. Yet, state-of-the-art technologies have rarely reported the preparation of high-purity silica from high-silicon IOTs. Thus, this study proposed an eco-friendly technology for producing high-purity silica from high-silica IOTs through the coupling of superconducting high gradient magnetic separation (S-HGMS) preconcentration with leaching followed by the use of ultrasound-assisted fluorine-free acid solution. Following an analysis of the separation index and chemical composition, the optimum conditions for the quartz preconcentration were determined as a magnetic flow ratio of 0.068 T s/m, a slurry flow velocity of 500 mL/min, and a pulp concentration of 40 g/L. Consequently, the SiO2 grade increased from 69.32% in the raw sample to 93.12% in quartz concentrate following the application of S-HGMS, with the recovery reaching 45.24%. X-ray diffraction, vibrating sample magnetometer, and scanning electron microscope analyses indicated that quartz was effectively preconcentrated from the tailings by S-HGMS. Subsequently, employing the "ultrasound-assisted fluorine-free acid leaching process," impurity elements were removed and high-purity silica was produced. Under optimal leaching conditions, the SiO2 purity of silica sand increased to 97.42%. Following a three-stage acid leaching process with 4 mol/LHCl +2 mol/LH2C2O4, the removal efficiency of Al, Ca, Fe, and Mg exceeded 97% for all cases, and the SiO2 purity in high-purity silica reached 99.93%. Thus, this study proposes a new strategy for the preparation of high-purity quartz from IOTs, which facilitated the effective realization of the high-value utility of the tailings. Furthermore, it provides a theoretical basis for the industrial application of IOTs, which is of great scientific significance and practical application value.

Efficient Iron Removal to Produce High Purity Quartz Sand by Micro-Inclusion Bursting Using Microwave Pretreatment Combined with Different Acid

Purification of Quartz Via Low-Temperature Microwave Chlorinated Calcination Combined with Acid Leaching and its Mechanism

Study on the Preparation of High-Quality Quartz and Its Mechanism by Combining Pretreatment with Metallurgy

A Review on Removal of Iron Impurities from Quartz Mineral

Purifying Technology of Preparing High Purity Quartz Sands from Vein Quartz Ore

Hot-pressure acid leaching changes grain boundaries to deeply remove impurities in quartz sand

Removal of iron from silica sand by surface cleaning using power ultrasound

Separation and Purification of High-Purity Quartz from High-Silicon Iron Ore Tailing: an Innovative Strategy for Comprehensive Utilization of Tailings Resources

Innovative Process for the Extraction of 99.99% High-Purity Quartz from High-Silicon Iron Ore Tailings

Kinetics of iron removal from quartz under ultrasound-assisted leaching

Deep insight into the reductive roasting treatment on iron removing from quartz

Innovative Technology for Preparation of High-Purity Silica from Vein Quartz Ore Through S-HGMS Coupling Acid Leaching Process

Progress of Joint Process Research on Purification of High Purity Quartz Sand

Eco-friendly strategy for preparation of high-purity silica from high-silica IOTs using S-HGMS coupling with ultrasound-assisted fluorine-free acid leaching technology

Treatment of Blast Furnace Gas Washing Water by Utilization of Coagulation Associated with Microwave

Advanced Processing Techniques and Impurity Management for High-Purity Quartz in Diverse Industrial Applications

A Critical Review on the Mineralogy and Processing for High-Grade Quartz

Preparation of High-Purity Quartz Sand by Vein Quartz Purification and Characteristics: A Case Study of Pakistan Vein Quartz

Stable Nanodepth and Nanogram Level Material Removal in Electrochemically Induced Chemical Etching of Fused Quartz

Etching Characteristics of Crystal Quartz by Surface Wave Microwave Induced Plasma

Removal of hydroxyl impurities in vein quartz by vacuum roasting