Abstract:Improving the durability of short-rotation wood can be achieved through chemical and thermal modification. Chemical and thermal modification can have an impact on the physicochemical properties of wood, which can affect wood's surface characteristics and its resistance to weathering. The purpose of this study was to investigate the surface characteristics and artificial weathering resistance of chemically and thermally modified short-rotation teak wood coated with linseed oil (LO)-, tung oil (TO)-, and commercial oil-based coatings consisting of a mixture of linseed oil and tung oil (LT) and commercial oil-based polyurethane resin (LB) coatings. The short-rotation teak woods were prepared in untreated and treated with furfuryl alcohol (FA), thermal treatment (HT) at 150 and 220 °C, and combination of glycerol-maleic anhydride (GMA) impregnation with thermal treatment at 150 and 220 °C. The surface characteristics measured were surface free energy, wettability, Persoz hardness, bonding quality, and color changes before and after artificial weathering exposure. The results showed that chemical and thermal modifications treatment tended to reduce total surface free energy (SFE), hardness, wettability, and bonding quality. FA and GMA at 220 °C treatments provided homogenization effect on surface characteristics, especially in total SFE and wettability. The total SFE of untreated wood ranged from 45.00 to 51.13 mN/m, and treated wood ranged from 40.58 to 50.79 mN/m. The wettability of oil-based coating according to K-value ranged from 0.20 to 0.54. TO presented better photostability than LO. Short-rotation teak wood coated with oil-based commercial coatings presented better weathering resistance compared to pure natural drying oil. Commercial oil-based coatings provided better weathering protection for the chemically and thermally modified teak wood. The application of oil-based coatings on chemically and thermally modified short-rotation teak is being considered for the development of a better wood-protection system.

Chemical resistance of acetylated radiata pine sliced veneers

Acetylation of wood: understanding the risk of de-acetylation during exposure to elevated temperature

Investigating the influence of fabrication parameters, flax fibre reinforcement, and ageing on interlaminar shear strength in thermoplastic-bonded wood veneers

Comparative studies on the durability and moisture performance of wood modified with cyclic N-methylol and N-methyl compounds

Evaluation of kinetic parameter and mechanical Properties of biobased Epoxy Adhesives in Wood-based Composites for Automotive Applications

Wood modification with N-methylol and N-methyl compounds: a case study on how non-fixated chemicals in modified wood may affect the classification of their durability

Bonding performance and surface characterization of cold-bonded acetylated beech (Fagus sylvatica L.) laminated veneer lumber

Tensile and Impact Bending Properties of Chemically Modified Scots Pine

Comparative Adhesive Bonding of Wood Chemically Modified with Either Acetic Anhydride or Butylene Oxide

Water Permeability and Adhesion Strength of Bio-based Coating Applied on Wood

Improvements in Fire Resistance, Decay Resistance, Anti-Mold Property and Bonding Performance in Plywood Treated with Manganese Chloride, Phosphoric Acid, Boric Acid and Ammonium Chloride

Localization and characterisation of brown rot in two types of acetylated wood

Mechanical behaviour of chemically modified Norway spruce (Picea abies L. Karst.): Experimental mechanical studies on spruce wood after methacrylation and in situ polymerization of styrene

Microstructure of chemically modified wood using X-ray computed tomography in relation to wetting properties

Properties of patula pine plywood using phenolic resin-impregnated veneers

Chemical changes in thermally modified, acetylated and melamine formaldehyde resin impregnated beech wood

Mechanical properties of beech wood treated with malic acid-based polyester

Surface Characteristics and Artificial Weathering Resistance of Oil-Based Coatings on the Chemically and Thermally Modified Short-Rotation Teak Wood

Resistance against fungal decay of Scots pine sapwood modified with phenol-formaldehyde resins with substitution of phenol by lignin pyrolysis products

Tailored Biobased Resins from Acrylated Vegetable Oils for Application in Wood Coatings

Effect of Lignosulphonates on the Moisture Resistance of Phenol-Formaldehyde Resins for Exterior Plywood