Abstract:EFTWBs (Elastic-flexible thin-walled bearings) are mainly used in harmonic reducers. Under the condition of large reduction ratio and cyclic rotation, LFW (linear fretting wear), CFW (curve fretting wear) and CRF (complete rolling friction) appear in the bearing raceway. In this study, LFW and CFW experiments were carried out, and the relationship between coefficient of friction and surface hardness was analyzed. Meanwhile, the multi-dimensional analysis (surface hardness, residual stress, surface/subsurface retained austenite) of the raceway surface integrity of EFTWBs after 8000 h of high service was analyzed. Combined with the manufacturing process of EFTWBs and the above conclusions, the multi-state wear mechanism of raceway was comprehensively evaluated. The evaluation conclusions show that the raceway of EFTWBs contained CRF (including pitting and spalling) and sliding fretting wear (including LFW and CFW). The axial and tangential residual stresses of the untested and tested outer and inner ring raceways were compressive stresses. Grain delamination appeared on the tested outer and inner ring raceway subsurface (20 mu m from the surface). The wear of the outer ring raceway of EFTWBs was greater than that of the inner ring, and the wear was multiple. A 430 nm nanocrystalline layer was found under FIB-TEM on the surface layer of the outer ring raceway, and the fracture and obvious dislocation appeared. The rolling-sliding wear mechanism of EFTWBs raceway was comprehensively evaluated. The accuracy of this analysis was verified by combining thin-walled ring and Hertz theories. There are many detailed conclusions which provide theoretical support and data analysis for relevant manufacturers of harmonic reducer and robot EFTWBs.

Calculation and Analysis of Deformation Characteristic and Energy Dissipation of Flexible Bearings in Harmonic Drive for Industrial Robots

Theoretical Study of Harmonic Drive Flexible Bearing Durability

Combined Influence Mechanism of the Flexible Free Outer Ring on Contact Characteristic in Heavy-Load Cam Roller Bearings

Analysis of the Partial Axial Load of a Very Thin-Walled Spur-Gear (Flexspline) of a Harmonic Drive

Research on torsional stiffness of flexspline-flexible bearing contact pair in harmonic drive based on macro-micro scale modeling

Deformation of Harmonic Drive in Transmission State Based on Contact Analysis with Shell Element Tooth

Deformation Analysis of the Flexspline of Harmonic Drive Gears Considering the Driving Speed Effect Using Laser Sensors

Analysis and Evaluation of Multi-state Wear Mechanism of Elastic-flexible Thin-walled Bearings

Modeling and Fatigue Characteristic Analysis of the Gear Flexspline of a Harmonic Reducer

Study on Lubrication Characteristics of Novel Forced Wave Generator of Harmonic Drive without Flexible Bearing

Lubrication and stability analysis of nonlinear rotor-bearing system

Analysis of Bearing Failures in a Typical High-Power Marine Gearbox

Using multi-flexible body dynamic analysis and the Taguchi method to decrease the variation of output angular velocity in a double circular-arc harmonic gear drive

Influence of the Bearing Thermal Deformation on Nonlinear Dynamic Characteristics of an Electric Drive Helical Gear System

Automated Analysis of Meshing Performance of Harmonic Drive Gears under Various Operating Conditions

Modeling and Performance Analysis of Rotary Compressor Considering Multi-Body Coupling and Bearing Deformation

An Improved Modeling and Numerical Analysis Method for Tooth Surface Wear of Double-Arc Harmonic Gears

Study on Dynamic Coupling Behavior of End-Meshing Harmonic Reducers

A novel method based on mechanical analysis for the stretch of the neutral line of the flexspline cup of a harmonic drive

Stiffness reliability analysis of harmonic drive considering contact pairs wear

Dynamic Analysis Of Flexible Space Manipulators With Harmonic Reducer