Abstract:The flexible solid electrolytes attract more attention because (1) their light weight is necessary to further improve the gravimetric energy density (Wh/ kg); (2) good flexibility to develop roll to roll processing, and (3) easy to form films and good adhesion to allow a low-impedance contact with the solid electrodes [1]. Generally lithium salt is dissolved in the polymer matrix to achieve solid polymer electrolytes (SPEs). The involved lithium salt should have high solubility and good dissociation in the polymers, which are desired to possess low glass transition temperatures Tg and structural compliance for decoupled cation motion. Such ‘salt in polymer’ electrolyte have dual ion conductivity of the anion X and the lithium ions, in which Li+ diffusion induced by segmental motion is much more difficult than the counter anions. About 80% of the ionic current is carried by anions, leading to the high concentration polarization and low Li+ ion transference number [2]. In recent years, novel single-ion conductors has been prepared by fixing the anions such as alkyl carboxylate (RCO2 −) or sulfonate (RSO3 −) to the polymeric backbones, in which the transference number (tLi+) of Li+ cations is close to one. However, these single-ion conductors still suffer from a low ionic conductivity due to their low lithium-ion concentration and low degrees of negative charge distribution in these anions. Inspired by the design strategies for the flexible solid electrolyte, we try to exploring SPEs with high ambient ionic conductivity and simultaneously high lithium ion transference number (tLi +, higher than 0.5) from single lithium-ion conductive polymers [3]. In our study, a polyvinyl formal (PVFM) based single-ion SPEs (shorted for LiPVFM) has been proposed with wide electrochemical stability window and high lithium ion transference number of 0.87, in which the Li+ coordinated PVFM via coupling suitable amount of oxalate-chelated borate units to vinyl hydroxyl in the host polymer backbone [4]. Combined by constructing the tight and loose Li+ coupling on the polymer framework, the polymer membrane possesses a high concentration of highly mobile Li+, resulting in a significantly improved ambient ionic conductivity in two orders of magnitude to 5.7 × 10−4 S cm−1. Moreover, LiPVFM membranes exhibit an ultimate tensile strength 25 MPa and a high elongation-at-break value 266.7%. The promotion of LiPVFM with excellent mechanical and electrochemical properties opens up the rational design of advanced polymer electrolytes for room temperature operational solid-state batteries. Acknowledgements This work was financially supported by the National Key Research and Development Program of China (Grant No. 2018YFB0104302) and the National Natural Science Foundation of China (Grant No. 51872026). Reference [1] R. Zhang, N. W. Li, X. B. Cheng, Y. X. Yin, Q. Zhang, Y. G. Guo, Advanced Science, 2017, 4, 1600445. [2] L. Z. Long, S. J. Wang, M. Xiao, Y. Z. Meng, J. Mater. Chem. A. 2016, 4, 10038. [3]Fang Lian, Hong-yan Guan, Yan Wen, Xiao-rong Pan, Journal of membrane science, 2014, 469:67-72. [4] Hongnan Zhang, Fang Lian, Lijuan Bai, Nan Meng, Chunzhong Xu, Journal of Membrane Science, 2018, 552: 349–356.

Polymer Electrolytes Based on the Lithium Form of Nafion Sulfonic Cation-Exchange Membranes: Current State of Research and Prospects for Use in Electrochemical Power Sources

Nanoscale Ionic Materials for Nafion Based Nanocomposites Membranes As Single Lithium-Ion Conducting Polymer Electrolytes for Lithium Sulfur Batteries

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Nafion-Based Quasi-Solid-State Polymer Electrolyte for Lithium-Sulfur Batteries

(Invited) Liquid and Solid State NMR Investigations of Electrolytes for Beyond Lithium Ion Applications

A Single Ionic Conductor Based on Nafion and Its Electrochemical Properties Used As Lithium Polymer Electrolyte

Polysiloxane-Based Single-Ion Conducting Polymer Electrolyte for High-Performance Li‖NMC<sub>811</sub> Batteries

Nafion-212 Membrane Solvated by Ethylene and Propylene Carbonates as Electrolyte for Lithium Metal Batteries

Converting Nafion into Li+‐Conductive Nanoporous Materials

New Network Polymer Electrolytes Based on Ionic Liquid and SiO2 Nanoparticles for Energy Storage Systems

A design of Nafion-coated bilayered quasi-solid electrolyte for lithium-O2 batteries with high performance

Soluble and Perfluorinated Polyelectrolyte for Safe and High‐Performance Li−O2 Batteries

Regulating the Solvation Structure in Polymer Electrolytes for High‐Voltage Lithium Metal Batteries

A Single-Lithiun-Ion Conductor Coordinated Porous Pvfm-Peg Based Membrane and Plasticizer As Electrolyte for Lithium Ion Batteries

Lithium Salt Inclusion As a Strategy for Improving the Li+ Conductivity of Nafion Membranes in Aprotic Systems

In-Situ gelled Polymer Electrolytes for Advanced Lithium Ion Batteries

Molecular Design for In‐Situ Polymerized Solid Polymer Electrolytes Enabling Stable Cycling of Lithium Metal Batteries

Innovative Electrolytes Based on Ionic Liquids and Polymers for Next-Generation Solid-State Batteries

Realizing Scalable Nano-SiO2-Aerogel-Reinforced Composite Polymer Electrolytes with High Ionic Conductivity Via Rheology-Tuning UV Polymerization

Nafion Membranes As Electrolyte and Separator for Sodium-Ion Battery

A New Strategy for Construction of Flexible Solid Electrolytes Based on Single Lithium-Ion Conductive Polymers