Abstract:Rheology modifiers are essential for the flat rheology of water-based drilling fluids in deepwater. The low temperature thickening of deepwater water-based drilling fluids results in dramatic rheological changes in the 20–30 °C range. To address such problems, NIPAM with a self-polymerized product LCST of 32–35 °C was selected as the main body for synthesis. While introducing the hydrophilic monomer AM to enhance the thickening properties, the hydrophobic monomer BA was selected to reduce the LCST of the product. In this paper, a temperature-sensitive polymeric rheology modifier (PNBAM) was synthesized by emulsion polymerization using N-isopropyl acrylamide, acrylamide, and butyl acrylate as monomers. The PNBAM was characterized using infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and nuclear magnetic resonance hydrogen spectroscopy (NMR). The rheological properties, temperature resistance, and salt resistance of PNBAM in the base fluid (BF) were tested. The performance of PNBAM in the drilling fluid system was also evaluated, and a water-based drilling fluid system of flat rheology for deepwater was formulated. The rheological modification mechanism of PNBAM was analyzed by turbidity analysis, particle size analysis, and zeta analysis. Experimental results show that PNBAM has good rheological properties. PNBAM is temperature resistant to 150 °C, salt-resistant to 30 wt%, and calcium resistant to 1.0 wt%. PNBAM also has good flat rheology characteristics in drilling fluid systems: AV4°C:AV25°C = 1.27, PV4°C:PV25°C = 1.19. Mechanistic analysis showed that the LCST (Lower Critical Solution Temperature) of 0.2 wt% PNBAM in an aqueous solution was 31 °C. Through changes in hydrogen bonding forces with water, PNBAM can regulate its hydrophilic and hydrophobic properties before and after LCST, which thus assists BF to achieve a flat rheological effect. In summary, the temperature-sensitive effect of PNBAM has the property of enhancing with increasing temperature. While the tackifying effect of conventional rheology modifiers diminishes with increasing temperature, the temperature-sensitive effect of PNBAM gives it an enhanced thickening effect with increasing temperature, making it a more novel rheology modifier compared to conventional treatment additives. After LCST, compared to conventional rheology modifiers (XC), PNBAM has a more pronounced thermo-thickening effect, improving the main rheological parameters of BF by more than 100% or even up to 200% (XC less than 50%). This contributes to the flat rheology of drilling fluids. PNBAM has good application prospects and serves as a good reference for the development of other rheology modifiers.

Development and evaluation of a high temperature and high salinity resistant rheological enhancer for water-based drilling fluids

JIN Zhiyuan1,2, SHAN Guorong2,3, PAN Pengju2,3

Temperature- and Salt-Resistant Micro-Crosslinked Polyampholyte Gel as Fluid-Loss Additive for Water-Based Drilling Fluids

Preparation of a salt-responsive zwitterionic hydrophobically associating polymer and its application in a saturated sodium chloride drilling fluid

Development of temperature- and salt-resistant viscosifier with dual skeleton structure of microcrosslinking and hydrophobic association structures and its application in water-based drilling fluids

Investigation on Filtration Control of Zwitterionic Polymer AADN in High Temperature High Pressure Water-Based Drilling Fluids

The Effects of Organically Modified Lithium Magnesium Silicate on the Rheological Properties of Water-Based Drilling Fluids

A micro-crosslinked amphoteric hydrophobic association copolymer as high temperature- and salt-resistance fluid loss reducer for water-based drilling fluids

A Zwitterionic Copolymer as Rheology Modifier and Fluid Loss Agents for Water-Based Drilling Fluids

Application of environmentally friendly amphoteric polyacrylamide hydrophobically modified with plant oil as additive in water-based drilling fluid

Preparation and performance evaluation of heat resistant and salt resistant anionic fluid loss reducer for water‐based drilling fluid

A Temperature-Sensitive Polymeric Rheology Modifier Used in Water-Based Drilling Fluid for Deepwater Drilling

Amphoteric tetramer as a filtration-loss reducer in low-solid phase water-based drilling fluids under high thermal-saline conditions

Fracturing Fluid Polymer Thickener with Superior Temperature, Salt and Shear Resistance Properties from the Synergistic Effect of Double-Tail Hydrophobic Monomer and Nonionic Polymerizable Surfactant

Rheological Performance of High-Temperature-Resistant, Salt-Resistant Fracturing Fluid Gel Based on Organic-Zirconium-Crosslinked HPAM

A zwitterionic copolymer as fluid loss reducer for water-based drilling fluids in high temperature and high salinity conditions

Polymer nanocomposite ADA@SM as a high-temperature filtrate reducer for water-based drilling fluids and its filtration loss mechanism

Laponite-polymer composite as a rheology modifier and filtration loss reducer for water-based drilling fluids at high temperature

Synthesis and performance evaluation of thermo-thickening/Nano-SiO2 as a viscosifier for bentonite-free water-based drilling fluids

A high-temperature resistant and high-density polymeric saturated brine-based drilling fluid

Synthesis and characterization of a novel functionalized silica/polyacrylamide composite for advanced water‐based drilling design