Abstract:This paper discusses the effect called undesirable extrusion dynamics that occur during material extrusion printing or fused deposition modeling. This effect is revealed during high acceleration and deceleration of printing head and results in over-extrusion on corners of parts and printed layer unevenness. To minimize this effect, modern control systems use Advance algorithms for dynamics control. However, such disadvantages as inertia, reduced printing speed, need for manual calibration, as well as uncertainty of the influence of material, nozzle geometry, and printing process parameters on the algorithm performance do not allow this group of solutions to be applied on an industrial scale. The paper presents a study of the influence of printing characteristics, such as material type, extruder type, printing temperature, layer and nozzle geometry, on extrusion dynamics through a series of experiments. The experiments were carried out on a Creality Ender 3 printer. The obtained experimental data will allow us to deepen the understanding of extrusion dynamics influence in FDM printing; they are also used in the present study to modify existing dynamics control algorithms. The paper proposes a modification of Advance algorithm based on machine learning. It is proposed to implement an algorithm containing two trained neural network models. One model predicts changes in printing head motion to minimize residual defects and increase average print speed. The second model predicts the compensation parameter for specific printing conditions without the need for manual calibration. A neural network model was trained to determine the compensation parameter depending on the type of material, layer thickness, nozzle geometry and printing temperature. The model was trained based on experimental data. The developed algorithm was introduced into Linear Advance algorithm of the Marlin firmware and tested on Creality Ender 3. The experiments showed that the developed model can successfully predict the required compensation and can be applied during the printing process. The proposed algorithm helps to facilitate and automate the process of extrusion dynamics compensation which will expand the possibilities of FDM printers’ application in industrial conditions. The obtained algorithm can improve the accuracy and printing speed which will subsequently help to increase the economic independence and competitiveness of small design organizations and enterprises in Russia that use 3D printers. This research expands the possibilities of rapid prototyping and may help to ensure the rapid creation of pilot batches.

Quantitative and Real‐Time Control of 3D Printing Material Flow Through Deep Learning

Real-Time Precision in 3D Concrete Printing: Controlling Layer Morphology via Machine Vision and Learning Algorithms

Highly Productive 3D Printing Process to Transcend Intractability in Materials and Geometries via Interactive Machine‐Learning‐Based Technique

Intelligent accuracy control service system for small-scale additive manufacturing

Data-Driven Extrusion Force Control Tuning for 3D Printing

Improving precision of material extrusion 3D printing by in-situ monitoring & predicting 3D geometric deviation using conditional adversarial networks

Online Quality Monitoring in Material Extrusion Additive Manufacturing Processes Based on Laser Scanning Technology

Enhancing Fused Deposition Modeling Precision with Serial Communication-Driven Closed-Loop Control and Image Analysis for Fault Diagnosis-Correction

Machine-learning-based monitoring and optimization of processing parameters in 3D printing

A data-driven machine learning approach for the 3D printing process optimisation

Machine learning-enabled optimization of extrusion-based 3D printing

Automated Real‐Time Detection and Prediction of Interlayer Imperfections in Additive Manufacturing Processes Using Artificial Intelligence

Pressure control in material extrusion additive manufacturing

3D printing in materials manufacturing industry: A realm of Industry 4.0

Towards smart monitored AM: Open source in-situ layer-wise 3D printing image anomaly detection using histograms of oriented gradients and a physics-based rendering engine

Predicting Laser Powder Bed Fusion Defects Through In-Process Monitoring Data and Machine Learning

Machine Learning Based Fault Anticipation for 3D Printing*

Precision Flow Rate Control During Micro-Scale Material Extrusion by Iterative Learning of Pressure-Flow Rate Relationships

Physics-informed deep learning to quantify anomalies for real-time fault mitigation in 3D printing

Foundations of Intelligent Additive Manufacturing

The use of machine learning in process–structure–property modeling for material extrusion additive manufacturing: a state-of-the-art review