Abstract:Parameter values adopted in railway engineering analysis at present are generally obtained through triaxial tests, whereas the remarkable difference between the actual stress path during train passage and the loading path in cyclic triaxial tests may lead to inaccurate predictions and even engineering problems. Published researches show that the actual stress path probably contains principal stress rotation(PSR), which has a sisgnificant influence on the mechanical response of soil. However, the conventional approach, i.e. cyclic triaxial test is not efficient in simulating this complicated stress path involving PSR. Instead, hollow cylinder test with cyclic shear stress has been proved to be an excellent selection for PSR study. In order to obtain reliable stress path for guiding hollow cylinder tests, three-dimensional calculation for a certain urban railway is carried out; and the distribution regularity of cyclic stress amplitudes, cycle numbers and PSR under train loads is analyzed. Furthermore, a series of cyclic torsional shear tests on hollow cylinder samples is employed to simulate the complex stress path and to research the deformation and pore pressure accumulation properties of saturated soft clay. Considering stress in foundation soil decreasing along with the depth increasing, various cyclic stress amplitudes corresponding to different depths are adopted in this experiment study. Three-dimensional calculation shows that the major principal stress axis will rotate from -90 degrees to 90 degrees during the train loading passage as well as the number and amplitude of stress waves reduce gradually with the increase of depth. It is also shown that both PSR and stress are quite sensitive to train loads as the upper soil element can identify a single wheel load while the lower soil element can just identify a bogie and even the whole train load. And through the cyclic torsional shear tests, it's obvious that the rotation of principal stress can promote the accumulation of pore pressure and strain in soft soil foundations significantly; and in the case when vertical cyclic stress amplitude equals to 15 kPa, the pore pressure and strain in cyclic torsional shear test are 77% and nearly 50% higher than that in cyclic triaxial test respectively. What's more, as the cyclic stress amplitude increases, the gap of cumulative pore pressure and strain between that two types of tests will enlarge further, which may even result in essential difference that samples in triaxial tests show only small strain whereas failure in torsional shear tests.

Stiffness of Ballastless Railway Embankments Determined by Repetitive Static Plate Load Tests

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

A numerical framework for modelling settlements of railway ballast layers

Stress–Strain Analysis of Heavy Haul Rail Track with Steel Slag Ballast by Laboratory Tests and Numerical Simulations

Dynamic Response of Railways on Layered Half-Space Subjected to Moving Train Load

Technical Note: Three-dimensional analyses of dynamic responses of track-ground system subjected to a moving train load

Analytical Method for Structural Analysis of Segmental Lining Interaction with Nonlinear Surrounding Soil and Its Application in Physical Test Interpretation

Three-dimensional steady-state response of a railway system on layered half-space soil medium subjected to a moving train

Research on mechanical response of soft clay under cyclic loading involving principal stress rotation

Undrained Cyclic Response of K0–Consolidated Stiff Cretaceous Clay under Wheel Loading Conditions

Numerical investigation on loading pattern of railway concrete slabs

Advanced Full-Scale Laboratory Dynamic Load Testing of a Ballasted High-Speed Railway Track

Elastic characteristics of the underrail base of a ballastless railway track

Degraded Ballast Stiffness Characterization Using Bender Element Field Sensor and PANDA® Penetrometer

Dynamic soil arching effect in pile-supported embankment due to train passages at high speeds

Stress path in soil element of ground under moving traffic loads

Spatial Distribution of Dynamic Stresses in Embankment of High-speed Railway under Moving Loads

Study on the Stiffness and Dynamic Characteristics of a Bridge Approach Zone: Tests and Numerical Analyses

Experimental Study on Stiffness and Strength of Ballastless Track Slabs

Numerical modelling of railway ballast at the particle scale

Dynamic Responses of Rail-Embankment-Foundation on High-Speed Railways under Moving Loads