Abstract:Atomic-resolution scanning transmission electron microscopy is used to study stacking faults and their configurations formed in cold deformed samples of a face-centered cubic (FCC) Fe42Mn38Co10Cr10 (at.%) high-entropy alloy (HEA). It is found that the deformed microstructures contain at least four types of intrinsic stacking faults and two types of extrinsic stacking faults that are bounded by different partial dislocations, including Shockley, Frank and unusual 1/6<411> partials. Additionally, seventeen types of stacking fault configurations are also found, including the well-known Lomer-Cottrell lock, Hirth lock and faulted dipole, the rarely reported intrinsic-extrinsic fault bend, and thirteen hitherto unreported configurations containing different stacking faults and partial dislocations. Among these seventeen configurations, fifteen of them are constructed by conjugate stacking faults connecting at their edges, with a stair-rod partial belonging to 1/6<110>, 1/3<110> or 1/3<100> lying at every joint point of the stacking faults; and the rest two configurations have two intersecting stacking faults but contain different stair-rod dipoles at the intersection. Fourteen of these configurations are all comprised exclusively of intrinsic stacking faults, while three of them consist of a mixture of intrinsic and extrinsic stacking faults. Moreover, three out of the seventeen configurations contain surprisingly a Frank partial at one edge, in contrast to previously reported configurations that are all bounded exclusively by Shockley partials. Based on Burgers vector analysis, the formation mechanisms of the six types of stacking faults and the seventeen types of configurations are proposed and discussed.

Influence of Hydrogen Absorption on Stacking Fault of Energy of a Face-Centered Cubic High Entropy Alloy

Stacking Fault Energy of Face-Centered-cubic High Entropy Alloys

Sluggish hydrogen diffusion and hydrogen decreasing stacking fault energy in a high-entropy alloy

Highly Pressurized Helium Nanobubbles Promote Stacking-Fault-mediated Deformation in FeNiCoCr High-Entropy Alloy

Stacking fault induced hardening and grain size effect in nanocrystalline CoNiCrFeMn high-entropy alloy

Generalized Stacking Fault Energy of Al-Doped CrMnFeCoNi High-Entropy Alloy

Formation and Anisotropic Mechanical Behavior of Stacking Fault Tetrahedron in Ni and CoCrFeNiMn High-Entropy Alloy

Hydrogen embrittlement of a precipitation-strengthened high-entropy alloy

Influence of hydrogen behaviors on tensile properties of equiatomic FeCrNiMnCo high-entropy alloy

Generalized Stacking Faults Energies of Face-Centered Cubic High-Entropy Alloys: A First-Principles Study

Effects of stacking fault energy on the deformation behavior of CoNiCrFeMn high-entropy alloys: A molecular dynamics study

In-situ investigation of the interaction between hydrogen and stacking faults in a bulk austenitic steel

Stacking Fault Energy Analyses of Additively Manufactured Stainless Steel 316L and CrCoNi Medium Entropy Alloy Using In Situ Neutron Diffraction

Interaction Between Dislocations, Precipitates and Hydrogen Atoms in a 2000 MPa Grade Hot-Stamped Steel

Theoretical Analysis of Stacking Fault Energy, Elastic Properties, Electronic Properties, and Work Function of MnxCoCrFeNi High-Entropy Alloy

Stacking Fault Strengthening in CoCrFeMnNi High-Entropy Alloy

Atomic scale characterization of complex stacking faults and their configurations in cold deformed Fe42Mn38Co10Cr10 high-entropy alloy

Temperature Dependent Stacking Fault Energy of FeCrCoNiMn High Entropy Alloy

Modeling of solute hydrogen effect on various planar fault energies

Spatially Varied Stacking Fault Energy Induced Low Twinning Ability in High Entropy Alloys

Size dependency in stacking fault-mediated ultrahard high-entropy alloy thin films