Abstract:A novel macroporous silica-based chelating polymeric composite. DtDo/SiO(2)-P, was synthesized by molecular modification of 4,4',(5')-di-(tert-butylcyclohexano)-18-crown-6 (DtBuCH18C6) with along carbon chain organic compound 1-dodecanol. It was performed through impregnation and immobilization of DtBuCH18C6 and 1-dodecanol molecules into the pores of the SiO(2)-P particles. The adsorption of a few fission and non-fission product elements Sr(II), Ba(II), Cs(I), Ru(III), Mo(VI), Na(I), K(I), Pd(II), La(III), and Y(III) onto DtDo/ SiO(2)-P was investigated at 323 K. The effects of contact time and the HNO(3) concentration in a range of 0.1-4.0 M were investigated. It was found that at the optimum concentration of 2.0 M HNO(3), DtDo/SiO(2)-P exhibited strong adsorption ability and excellent selectivity for Sr(II) over all of the tested elements, which showed very weak or almost no adsorption except Ba(II). The bleeding of total organic carbon (TOC) from DtDo/SiO(2)-P was evaluated. The quantity of TOC in aqueous phase increased with an increase in HNO(3) concentration in terms of a linear equation [TOC] = 35.82[HNO(3)] + 115.5 with a correlation coefficient of 0.9751. The TOC content leaked from DtDo/SiO(2)-P modified by 1-dodecanol, 119.0-269.3 ppm, in the range of 1.0-4.0 M HNO(3) was significantly lower than that of 424.8-634.6 ppm in the case without modification. It resulted from the intermolecular interaction force of DtBuCH18C6 and 1-dodecanol through hydrogen bonding. The reduction of DtBuCH18C6 leakage by molecular modification was achieved. It is of great benefit to application of DtDo/SiO(2)-P in partitioning of Sr(II), one of the main heat generators, from high level liquid waste (HLLW) in reprocessing process of nuclear spent fuel in MAREC (Minor Actinides Recovery from HLLW by Extraction Chromatography) process developed. (c) 2008 Elsevier Ltd. All rights reserved.

Modification of Carbon Nanomaterials with Dodecylamine to Improve the Quality of Their Dispersion in Chloroform

Modification Of A Novel Macroporous Silica-Based Crown Ether Impregnated Polymeric Composite With 1-Dodecanol And Its Adsorption For Some Fission And Non-Fission Products Contained In High Level Liquid Waste

Enhanced Dispersion of Nanotubes in Organic Solvents by Donor-Acceptor Interaction Between Functionalized Poly(Phenylacetylene) Chains and Carbon Nanotube Walls

Dispersant Selection for Nanomaterials: Insight into Dispersing Functionalized Carbon Nanotubes by Small Polar Aromatic Organic Molecules

Well-established carbon nanomaterials: modification, characterization and dispersion in different solvents

Effect of nanodiamond particles on the structure, mechanical, and thermal properties of polymer embedded ND/PMMA composites

Dispersion characteristics and mechanical properties of epoxy nanocomposites reinforced with carboxymethyl cellulose functionalized nanodiamond, carbon nanotube, and graphene

Chitin Nanofibers Enable the Colloidal Dispersion of Carbon Nanomaterials in Aqueous Phase and Hybrid Material Coassembly

Surface optimization of detonation nanodiamonds for the enhanced mechanical properties of polymer/nanodiamond composites

Preparation of Carbon Nanotube Dispersions in Solutions of Ethoxylated Fatty Alcohols for Modifying Gel Systems

Dispersibility and Stability Studies of Cellulose Nanofibers: Implications for Nanocomposite Preparation

A Noncovalent Functionalization Approach to Improve the Dispersibility and Properties of Polymer/mos 2 Composites

Dispersion Stability of Functionalized MWCNT in the Epoxy–amine System and Its Effects on Mechanical and Interfacial Properties of Carbon Fiber Composites

Impact of Dispersion Methods on Mechanical Properties of Carbon Nanotube (CNT)/Iron Oxide (Fe3O4)/Epoxy Composites

Exfoliation and Modification of Covalent Organic Frameworks by a Green One-Step Strategy: Enhanced Thermal, Mechanical and Flame Retardant Performances of Biopolymer Nanocomposite Film

An Effective Method for Hybrid CNT/GNP Dispersion and Its Effects on the Mechanical, Microstructural, Thermal, and Electrical Properties of Multifunctional Cementitious Composites

Role of Solvent Polarity on Dispersion Quality and Stability of Functionalized Carbon Nanotubes

Tailorable Aqueous Dispersion of Single-Walled Carbon Nanotubes Using Tetrachloroperylene-Based Bolaamphiphiles Via Noncovalent Modification.

Effect of Composition of Nonionic and Cationic Copolymers of Alkoxyoligo(ethylene glycol) Methacrylates and Dodecyl Methacrylate on Their Properties in Solutions

Dimethylformamide: an effective dispersant for making ceramic–carbon nanotube composites

Dispersing carbon-based nanomaterials in aqueous phase by graphene oxides.