Abstract:The development of new bio-friendly alternatives for wood conservation is of great interest and necessary for environmental protection. In this paper, the preparations based on the propolis extract and silicon compounds were used as green wood preservatives. The wood was treated with 15% propolis extract (EEP) and two propolis-silane preparations, namely, EEP-VTMOS/TEOS (EEP with vinyltrimethoxysilane and tetraethyl orthosilicate) and EEP-MPTMOS/TEOS (EEP with 3-(trimethoxysilyl) propyl methacrylate and tetraethyl orthosilicate). The aim of the research was to determine the properties of treated wood, which was characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), atomic absorption spectroscopy (AAS), X-ray fluorescence (XRF), and scanning electron microscopy (SEM). Moreover, the resistance against brown-rot fungus Coniophora puteana and the mechanical properties of treated wood were also determined. The analysis of phenolic compounds concentration in treated wood indicated that phenols were in greater extent leached from wood treated with the propolis extract than from wood impregnated with the propolis-silane preparations. The presence of silicon in treated wood both before and after leaching was confirmed by CP MAS NMR measurements. In turn, AAS and XRF analyses indicated that the degree of Si leaching from wood impregnated with EEP-VTMOS/TEOS was approximately two times lower than from EEP-MPTMOS/TEOS treated wood. The results of chemical analyses confirmed that the constituents of the propolis-silane preparations formed permanent bonds with wood. In turn, the results of the antifungal efficacy against C. puteana showed that the propolis extract and the propolis-silane preparations limited the fungus activity, even the wood was subjected to leaching procedure. The treated wood showed an increase in bending strength and a decrease in the modulus of elasticity compared to untreated wood. The obtained results indicate that the propolis-silane preparations can be promising green wood preservatives, harmless for the natural environment.

Polymerised merbau extractives as impregnating material for wood properties enhancement

Bulk Polymerization of PEGDA in Spruce Wood Using a DBD Plasma-Initiated Process to Improve the Flexural Strength of the Wood–Polymer Composite

The chemical modification of tropical wood polymer composites

Resistance against fungal decay of Scots pine sapwood modified with phenol-formaldehyde resins with substitution of phenol by lignin pyrolysis products

Improvement in Monterey pine of the flame retardancy, thermal conductivity, and mechanical performance through incorporating functional epoxy resin

Comparative studies on the durability and moisture performance of wood modified with cyclic N-methylol and N-methyl compounds

Synthesis and Characterization of an Environmentally Friendly Phenol–Formaldehyde Resin Modified with Waste Plant Protein

Wood modification with phenol urea formaldehyde (PUF) resin: the influence of wood species selection on the dimensional stability

Wood treatment using in situ polymerization of pine resin and styrene

Manufacturing and Characterization of Modified Wood with In Situ Polymerization and Cross-linking of Water-Soluble Monomers on Wood Cell Walls

Chemical, Biological and Mechanical Characterization of Wood Treated with Propolis Extract and Silicon Compounds

Enhancement of the physical and mechanical properties of wood using a novel organo-montmorillonite/hyperbranched polyacrylate emulsion

Mechanical properties of beech wood treated with malic acid-based polyester

Mechanistic Study of the Synergistic Interaction of Furfuryl Alcohol and Caprolactam in the Modification of Pinus massoniana Earlywood and Latewood

Processing of polymer wood composite material from pine cone and the binder of phenol formaldehyde/PVAc/molasses and improvement of its properties

Fabrication and mechanism analysis of wood polymer composites with improved hydrophobicity, dimensional stability and mechanical strength

Research on Enhancing the Comprehensive Performance of Fir Wood through Chemical Modification with a Biobased Unsaturated Polyester

Development of strong, tough and flame-retardant phenolic resins by using Acacia mangium tannin-functionalized graphene nanoplatelets

Investigate on the physical and mechanical properties of wood-polymer composition materials made on the premise of neighborhood wood flours

Graphene oxide a promising formaldehyde scavenger of phenolic resin‐bonded plywood: From elaboration to evaluation

Flammability, Tensile, and Morphological Properties of Oil Palm Empty Fruit Bunches Fiber/Pet Yarn-Reinforced Epoxy Fire Retardant Hybrid Polymer Composites