Abstract:Recent advances in additive manufacturing (AM) have enabled the fabrication of functionally graded porous biomaterials (FGPBs) for application as orthopedic implants and bone substitutes. Here, we present a step-wise topological design of FGPB based on diamond unit cells to mimic the structure of the femoral diaphysis. The FGPB was manufactured from Ti-6Al-4V powder using the selective laser melting (SLM) technique. The morphological parameters, permeability and mechanical properties of FGPB samples were measured and compared with those of the biomaterials with uniform porous structures based on the same type of the unit cell. The FGPB exhibited a low density (1.9 g/cm3), a moderate Young's modulus (10.44 GPa), a high yield stress (170.6 MPa), a high maximum stress (201 MPa) and favorable ductility, being superior to the biomaterials with uniform porous structures in comprehensive mechanical properties. In addition, digital image correlation (DIC) and finite element (FE) simulation were used to unravel the mechanisms governing the deformation and yielding behavior of these biomaterials particularly at the strut junctions. Both DIC and FE simulations confirmed that the deformation and yielding of the FGPB occurred largely in the load-bearing layers but not at the interfaces between layers. Defect-coupled FE models based on solid elements provided further insights into the mechanical responses of the FGPB to compressive loads at both macro- and micro-scales. With the defect-coupled representative volume element model for the FGPB, the Young's modulus and yield stress of the FGPBs were predicted with less than 2% deviations from the experimental data. The study clearly demonstrated the capabilities of combined experimental and computational methods to resolve the uncertainties of the mechanical behavior of FGPBs, which would open up the possibilities of applying various porosity variation strategies for the design of biomimetic AM porous biomaterials. STATEMENT OF SIGNIFICANCE: Functionally graded bone scaffolds significantly promote the recovery of segmental bone defect. In the present study, we present a step-wise topological design of functionally graded porous biomaterial (FGPB) to mimic the structure of the femoral diaphysis. The Ti-6Al-4V FGPB exhibited a superior combination of low density, moderate Young's modulus, high yield stress and maximum stress as well as favorable ductility. The biomechanical performance of FGPB was studied in both macro and micro perspectives. The defect-coupled model revealed the significant yielding in the load-bearing parts and the Young's modulus and yield stress of the FGPBs were predicted with less than 2% deviations from the experimental data. The superiority of combined experimental and computational methods has been confirmed.

Functionally graded materials: A review of computational materials science algorithms, production techniques, and their biomedical applications

State of the art in functionally graded materials

Review on developments of bulk functionally graded composite materials

Additive manufacturing of metal-based functionally graded materials: overview, recent advancements and challenges

Functionally Graded Metamaterials: Fabrication Techniques, Modeling, and Applications—A Review

Recent trends and future outlooks in manufacturing methods and applications of FGM: a comprehensive review

Mechanics of bioinspired functionally graded soft-hard composites made by multi-material 3D printing

Functional Gradient Metallic Biomaterials: Techniques, Current Scenery, and Future Prospects in the Biomedical Field

On the experimental results of functionally graded materials with computational mechanics approach: Review

Functionally Graded Materials: An Overview of Stability, Buckling, and Free Vibration Analysis

Functionally Graded Materials and Structures: Unified Approach by Optimal Design, Metal Additive Manufacturing, and Image-Based Characterization

Review of Machine Learning Methods for Additive Manufacturing of Functionally Graded Materials

State-of-the-art Review of Fabrication, Application, and Mechanical Properties of Functionally Graded Porous Nanocomposite Materials

Fabrication process of smooth functionally graded materials through a real-time inline control of the component ratio

A review on fabrication and characteristics of functionally graded aluminum matrix composites fabricated by centrifugal casting method

A Survey on Fused Filament Fabrication to Produce Functionally Gradient Materials

Effect of Main Parameters on the Mechanical and Wear Behaviour of Functionally Graded Materials by Centrifugal Casting: A Review

On the characterization of functionally graded biomaterial primed through a novel plaster mold casting process

Investigation of mechanical properties on functionally graded material reinforced with graphene nanoplatelets for biomedical applications

Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metallic biomaterials

Machine Learning for Additive Manufacturing of Functionally Graded Materials