Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. In the automotive industry, short glass fiber-reinforced thermoplastics are widely used under the hood and subjected to dynamic vibrations of the engine in multiple directions resulting in fatigue failure. Under fatigue loading, a significant portion of the strain energy is stored within the material, while the remaining portion is lost due to internal frictions and the damage occurrence. Internal friction results in heat generation, which in turn causes an increase in external temperature. This increase in temperature leads to thermal degradation of the polymer. Investigations on the cause of the stiffness drop are not widely available in the literature. Therefore, this study explores the source of the stiffness drop under biaxial fatigue loading of a polyamide 6,6 reinforced with 30 wt. % short glass fibers (PA66GF30) and distinguishes the contributions of thermal degradation and damage accumulation. The thermal evolution of the specimens was captured by means of thermography. In addition, the digital image correlation (DIC) technique was used to measure the in situ strain field during the fatigue. Despite the temperature stabilization being observed around the 10,000th cycle, the reduction in the stiffness continued until failure which was attributed to the mechanical damage accumulation and cyclic creep during the fatigue tests. Dynamic mechanical analyses (DMA) were carried out to quantify the stiffness drop with the varying temperature. From the results, it is seen that the damage accumulation and cyclic creep during the fatigue tests were responsible for the major part of the stiffness drop. Finally, scanning electron microscopy (SEM) inspection of the fracture surface was performed to identify fatigue damage mechanisms. Four unique features associated with the fatigue damage were identified: (1) debonding of fibers from the matrix, (2) polymer matrix crazing, and (3) cavitation and porosities, (4) pull out fiber ends and break on the fiber.

Observations of fatigue damage development in woven glass fiber-reinforced polymer composite using transmission light photography technique

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Physical analysis and statistical investigation of tensile and fatigue behaviors of glass fiber-reinforced polyester via novel fibers arrangement

Tensile Fatigue Behavior of Polyester and Vinyl Ester Based GFRP Laminates—A Comparative Evaluation

Evaluation of fatigue damage of woven GFRP laminate by dynamic properties

Fatigue behavior and self-heating mechanism of novel glass fiber reinforced thermoplastic composite

Comparative study of failure analysis in glass fiber reinforced laminated pin joints under cyclic and static loading conditions

Investigation of failure behavior of glass fiber reinforced epoxy laminate under fatigue loading

Manufacturing Process Effect on the Mechanical Properties of Glass Fiber/Polypropylene Composite Under High Strain Rate Loading: Woven (W-GF-PP) and Compressed GF50-PP

Experimental Determination of Fracture Toughness of Woven/Chopped Glass Fiber Hybrid Reinforced Thermoplastic Composite Laminates

Orthogonal Study on Mechanical and Tension–Tension Fatigue Properties of Flax/Glass Fiber Hybrid FRP Composites

Fatigue behavior of symmetric and asymmetric carbon and basalt fiber-reinforced polymer composites in transverse loading

Evaluation and Modeling of the Fatigue Damage Behavior of Polymer Composites at Reversed Cyclic Loading

Full-field investigation of dissipative mechanisms and thermoelastic inversion effects within glass-fiber reinforced polyamides subjected to low-cycle fatigue

Biaxial fatigue failure of short glass fiber reinforced polyamide 6,6: An in-depth investigation of stiffness drop and microstructural evolution

Damage investigation of hybrid flax-glass/epoxy composites subjected to impact fatigue under water ageing

Effect of severe thermo-oxidative aging on the mechanical behavior and fatigue durability of short glass fiber reinforced PA6/6.6

Investigation of anisotropy effects in glass fibre reinforced polymer composites on tensile and shear properties using full field strain measurement and finite element multi-scale techniques

Damage characterization of FRP embedded with different optical fibers under tensile load using acoustic emission and micrographic real-time inspection

Tensile fatigue response of a novel carbon/flax/epoxy hybrid composite under strain-controlled and stress-controlled amplitude

Post-Damage Compressive Strength of Woven Hybrid Composites Impacted with Various Energy Levels