Abstract:Optimization and ANN Prediction in abrasive water jet machining process. The aim of this investigation was to delve into the impact of abrasive water jet machining (AWJM) process variables on the surface roughness (Ra) and kerf angle (Ka) of hybrid fiber‐reinforced polyester composites. Utilizing both response surface methodology (RSM) and artificial neural network (ANN) prediction models, the study sought to optimize the input parameters for abrasive water jet machining, specifically in the context of paddy straw and PALF‐reinforced polyester hybrid composites. The process parameters targeted for optimization included the abrasive flow rate, traverse rate, and standoff distance during AWJM. The investigation identified an optimal combination of AWJM parameters that effectively meets the practical requirements for machining hybrid fiber‐reinforced polyester composites. According to the RSM, the suggested optimal values for the process parameters are an abrasive flow rate set at 300 g/min, traverse speed at 110 mm/min, and standoff distance at 1 mm. The ANN exhibited robust predictive capabilities, achieving high R2 scores of 0.932 and 0.962 for surface roughness and kerf angle, respectively. To enhance the performance of abrasive water jet machining and minimize surface roughness and kerf angle, the researchers conducted an optimization of the process parameters. Subsequently, confirmation experiments were executed to validate the predictive model and fine‐tune the set of process parameters for practical application. Highlights Investigated AWJM impact on Ra value and kerf angle of hybrid composites. Used RSM and ANN models for parameter optimization in biocomposite. Optimal AWJM parameters: AFR (300 g/min), TS (110 mm/min), and SOD (1 mm). ANN showed strong predictions: R2 scores 0.932 (Ra) and 0.962 (Ka). Confirmation experiments validated the predictive model for applications.

Analysis and Optimization of Abrasive water Jet Machiningprocesses on the hybrid nano particle reinforced Aluminum alloy matrix composite material

Characterization and Optimization of Abrasive Water Jet Machining Parameters of aluminium/silicon carbide Composites

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Analysis of Wire-cut Electric Discharge Machining Behaviour of AA6061 / C / ZrO2 Hybrid Nano Composites using Taguchi's method

ASSESSMENT OF MACHINABILITY BEHAVIOUR OF LM24 – NANO Al2O3 – Gr HYBRID COMPOSITES THROUGH STIR CASTING TECHNIQUE

Optimizing the machining variables in CNC turning of aluminum based hybrid metal matrix composites

Synthesis of AA8050/B4C/TiB2 Hybrid Nanocomposites and Evaluation of Computer-Aided Machining Parameters

Characterization and machinability analysis of aluminium-based metal matrix composites (MMC): A critical review

Characterization and Defect Analysis of Machined Regions in Al-SiC Metal Matrix Composites Using an Abrasive Water Jet Machining Process

An integrated CRITIC-COPRAS approach for multi-response optimization on AWJM of hybrid filler–reinforced polymer composite and its surface integrity

Integrating response surface methodology and machine learning for analyzing the unconventional machining properties of hybrid fiber‐reinforced composites

Optimization of Abrasive Water Jet Machining of SiC Reinforced Aluminum Alloy Based Metal Matrix Composites Using Taguchi–DEAR Technique

WEDM of Al/SiC/Ti composite: A Hybrid Approach of RSM-ARAS-TLBO Algorithm

Study on Machining Quality in Abrasive Water Jet Machining of Jute-Polymer Composite and Optimization of Process Parameters through Grey Relational Analysis

Parametric optimisation of milling process for the machining of carbon nanotubes-based hybrid aluminium composite

Effect of Nanoaluminium Nitride Ceramic Particles on Microstructure, Mechanical Wear, and Machining Behavior of Al-Si-Mg Alloy Matrix Composites Produced by Bottom Pouring Type Stir Casting Route

Experimental investigation to assess the surface integrity in WEDM of Al-based hybrid composite material

Investigation on Mechanical Behavior of Al6061- Coconut Shell Ash- Granite Dust Reinforced Hybrid Metal Matrix Composites Manufactured using Stir Casting Technique

The utilisation of coconut shell ash in production of hybrid composite: Microstructural characterisation and performance analysis

Experimental Investigation on Metal Matrix Nanocomposite: Aluminium Alloy 6061 and 7075 with SiC and Fly Ash

Simultaneous optimization of process parameters during abrasive water jet machining on glass fibre reinforced polymer