Model test study on the dynamic failure process of tunnel surrounding rocks in jointed rock mass under explosive load
Yunqiang Wang,Yeqing Chen,Chunhai Li,Yongsheng He,Qirui Wang,Jingmao Xu,JunQi Fan,Mengnan Dai
DOI: https://doi.org/10.1016/j.engfailanal.2024.108996
IF: 4
2024-10-27
Engineering Failure Analysis
Abstract:The presence of joints can significantly reduce the integrity and stability of an engineering rock mass. Under dynamic loads, such as from blasting excavation, the key blocks divided by joints may be destabilized and prone to sliding, potentially leading to engineering geological disasters like rockbursts. To study the dynamic instability process, similar materials for the rock mass and joints were developed based on the similarity theory, and a tunnel model in the jointed rock mass was constructed. Subsequently, a detonating fuse was used to generate a dynamic load, and the dynamic instability process of the tunnel surrounding rock in the jointed rock mass under explosive load was studied using the geotechnical multifunctional testing device. The deformation characteristics and dynamic instability process of the tunnel surrounding rock were analyzed using acceleration sensors, resistance strain gages, linear variable displacement transducers and motion camera. The study shows that the acceleration at the tunnel vault is significantly greater than at the straight wall and floor under blast loads, with differences reaching an order of magnitude. Acceleration waveforms were classified into three categories based on peak characteristics, explained through the propagation of explosive stress waves. Additionally, strain and displacement at the tunnel arch were also significantly greater than in other areas, indicating more severe stress concentration and dynamic damage at the arch, necessitating reinforced support in tunnel excavation. The entire dynamic instability process of the tunnel surrounding rock was successfully recorded using a motion camera. The dynamic failure process was divided into several phases, the appearance of cracks on the joint surface, particle ejection accompanied by the dropping of jointed blocks, a significant drop of the jointed blocks, and return to calm. The dynamic failure modes include the dropping and rotation of jointed blocks, local particle ejection, and shear cracks on jointed block.
engineering, mechanical,materials science, characterization & testing