The flexural strength of glue laminated timber beams based on deflection and strain rate with four point bending loading system

S Maricar,K Sulendra,H Listiawaty,H O Baide

DOI: https://doi.org/10.1088/1757-899X/1212/1/012034

2022-01-11

IOP Conference Series: Materials Science and Engineering

Abstract:The development of utilization of low quality wood as construction material is needed to reduce the exploitation of natural forests. However, low quality wood species have disadvantages in terms of mechanical properties. The mechanical properties of Sengon wood are relatively low, so it does not qualify as a structural element. Therefore, the system glulam can be applied to overcome this problem. The system glulam can produce relatively light structural elements with adequate performance. This system has been extensively developed, even at the stage of applying external reinforcement, to improve the performance of structural laminated beams. On that basis, this study aims to determine the flexural strength of laminated beams of Sengon wood as a low quality wood species. In order to achieve this goal, the laminated beam was tested using method four point bending test method. Tests were carried out on long span laminated beams ( L = 2750 mm) to observe f...