Abstract:This paper analyses the key findings of a study devoted to PET-modified bitumen. The research program was run according to the D-optimal experimental plan based on a factorial design. Five factors, i.e., the type of polymer (source), the type of bitumen (qualitative factors), PET amount, mixing rate, and mixing temperature (quantitative factors), controlled the bitumen–polymer mixing process. The experiment included a series of determinations of bitumen’s rheological characteristics obtained by MSCR (Jnr, R) and G*/sin(δ) at 50 °C, 60 °C, and 70 °C. The low-temperature properties of the composite (critical temperature) were evaluated using a BBR test. The findings showed that bitumen modification with PET primarily reduced the creep susceptibility of the bituminous–polymer mixture. The low-temperature characteristics of the modified bitumen played a secondary but essential role. The amount of polymer and the mixing rate interacted with the temperature, significantly reducing the stiffness of the composite, while the type and amount of bitumen had a substantial effect on the results obtained in the BBR test. It is worth noting that when combining bitumen and plastomer, special attention should be paid to ensuring a high level of homogeneity of the mixture by controlling the parameters of the mixing process accordingly. The tests and analyses provided crucial models (GLM), which allowed for the prediction of the plastomer-modified bitumen’s low- and high-temperature properties. The resulting relationships between factors and the identification of their impact on the bitumen properties enable a better understanding of the process of bitumen modification with PET. The conclusions presented here serve as a basis for future optimisation of the modified bitumen composition. The performed studies indicate that the use of >3% plastomer in bitumen 70/100 allows for a reduction in its susceptibility (MSCR) to below 0.5 kPa−1, making it suitable for bituminous mixtures for high-traffic roads. No significant increase in critical temperature (BBR) was observed.

Optimisation of Polymer Addition Using the Plackett-Burman Experiment Plan

Effects of the Mixing Process on the Rheological Properties of Waste PET-Modified Bitumen

THE EFFECT OF MULTILAYER PLASTIC WASTE ADDITION TO POLYMER MODIFIED BITUMEN CHARACTERISTICS

Advancing sustainable hybrid bitumen systems: A compatibilization solution by functionalized polyolefins for enhanced crumb rubber content in bitumen

Development of an Energy-Efficient Method of Obtaining Polymer-Modified Bitumen with High Operational Characteristics via Polymer–Bitumen Concentrate Application

Effect of Waste Polyethylene and Wax-Based Additives on Bitumen Performance

Reactive Extrusion of Waste Plastics with Compatibilizer and Lightly Pyrolyzed Crumb Rubber for Asphalt Modification

Mixed Design Optimization of Polymer-Modified Asphalt Mixtures (PMAs) Containing Carton Plastic Packaging Wastes

Performance Optimization Approach of Polymer-Modified Asphalt Mixtures with PET and PE Waste

Enhancing High-Temperature Performance of Flexible Pavement with Plastic-Modified Asphalt

Hybrid Polymerisation: An Exploratory Study of the Chemo-Mechanical and Rheological Properties of Hybrid-Modified Bitumen

Rubber and Rubber–Polymer Modifiers of Asphalt–Concrete Mixes Prepared by High-Temperature Shear-Induced Grinding. Part 3. Evaluation of Effectiveness of Modification

Comprehensive Study on the Performance of Waste HDPE and LDPE Modified Asphalt Binders for Construction of Asphalt Pavements Application

Devulcanized Tire Rubber–Waste Plastic Compounds: A Solution to Improve Storage Stability of Plastic-Modified Bitumen

Eco-friendly modification of bitumen: The effects of rubber wastes and castor oil on the microstructure, processability and properties

Modifying Bitumen with Recycled PET Plastics to Enhance Its Water Resistance and Strength Characteristics

The Utilisation of Polyethylene Waste Pyrolytic Wax as an Additive to Enhance the Performance of Virgin and Polypropylene-Modified Bitumen

Efficient use of waste photopolymer plates in bitumen modification and an alternative styrene–butadiene–styrene modification method

Analysis of Mechanical Performance of Bitumen Modified with Waste Plastic and Rubber Additives by Rheology and Self Diffusion NMR Experiments

Modification of bitumen using polyacrylic wig waste

Evaluating Effectiveness of Multi-Component Waste Plastic Bags on Bitumen Properties: Physical, Rheological, and Aging