Abstract:Transmission components are the main mechanical elements in a machine system, the accuracy level of the transmission system is one of the major sources of the machining error of multiaxis machine tools. This article investigates motion error analysis, volumetric motion error model for transmission system and the accuracy allocation method for multiaxis machine tools during the early design stage. For this purpose, a transmission system volumetric motion error model, which is based on the motion error matrix and screw theory, is derived for mapping transmission components' error parameters to the volumetric motion errors of machine tools. The volumetric motion error matrix combines motion errors along the machine tools' kinematic chains. Subsequently, the volumetric motion error model is expressed as a volumetric motion error twist, which is formulated from the volumetric motion error matrix. Additionally, the transmission system volumetric motion error twist model is used as design criteria for accuracy optimum allocation, with constraints on the twist magnitude and design variable limits. Then, design optimization is performed by using a multiobjective nonlinear optimization technique to minimize the manufacturing cost and volumetric motion error twist pitch. To solve this multiple objective optimum problem, this study proposes an approach integrating Lagrange multiplier and gradient descent operator with non-dominated sorting genetic algorithm-II (NSGA-II). Modified non-dominated sorting genetic algorithm-II searches for an allocation scheme Pareto optimal front. Consequently, VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR) determines the best compromise solution from the Pareto set. Finally, a numerical experiment for the optimal design of a numerical control machine tool is conducted, which highlights the advantages of the proposed methodology.

Influence of the positioning accuracy given by the positioning encoder of the CNC machine tools

Improvement of machine tool accuracy through ball screw location optimisation in relation to the guideways of the axes

Transmission System Accuracy Optimum Allocation for Multiaxis Machine Tools' Scheme Design

Influence of thermo-mechanical deformations on the positioning accuracy of CNC machine tools

Influence of Machine Tool Operating Conditions on the Resulting Circularity and Positioning Accuracy

Precision CNC machining and ways to achieve it

Experimental Study on Backlash Compensation of CNC Machine Tool

Enhancing positioning accuracy of CNC machine tools by means of direct measurement of deformation

Research on the Error Measurement and Error Compensation Technology for CNC Machine Tools

A status review of volumetric positioning accuracy prediction theory and static accuracy design method for multi-axis CNC machine tools

Performance Evaluation of Multi-Axis CNC Machine Tools by Interferometry Principle using Laser Calibration System

Research Status and Development of Precision Analysis of CNC Machine Tools

Improving CNC Machine Tool Geometric Precision Using Manufacturing Process Analysis Techniques

A mapping model between the workpiece geometric tolerance and the end pose error of CNC machine tool considering structure distortion of cutting process system

Positioning Errors Measurement of CNC Machine Tools Based on J-DBB Method

High-precision modeling of CNCs’ spatial errors based on screw theory

Process-integrated computerized numerical control: an analysis on process-machine coupling and feed scheduling

Advancements in accuracy decline mechanisms and accuracy retention approaches of CNC machine tools: a review

Evaluation of servo, geometric and dynamic error sources on five axis high-speed machine tool