Abstract:Fused deposition modeling (FDM) is a layered manufacturing (LM) process in which progressive 2D layers of material are kept making a 3D part. To optimize the building operation, the investigation is necessary to study the effect of process parameters. This study examines the impact of three filling patterns, "triangles," "cross," and "cross 3D," with three filling densities (25%, 50%, and 75%) in three orientations ("flat," "on long edge," and "on short edge") on ultimate tensile strength (UTS), hardness and the printing time of polylactic acid (PLA) material. This work built tensile specimens according to ASTM D638 on an open‐source 3D printer. The UTS was collected using a WDW‐2000 computer control electronic universal testing machine. The hardiness value was also measured using Shore A hardness durometers DIN 53505 and ASTM D2240. In addition, the building time was conducted by implementing the "Cura 4.6" slicer software. The results show that the filling pattern, orientation, and density at which the part is built significantly affect the strength, hardness, and building time. For light structure parts with 25% density, it is recommended to build parts with "triangles" "on long edge" to obtain the highest strength (31.02 MPa), which improved by 74.3%, with 281 HV at the minimum time (1 h:10 min), which was reduced by 46.1%. For dense structure parts, "triangles" and "on long edge" are recommended to give the highest strength (42.12 MPa), which can be improved by 69.8% (282 HV) at the minimum time (1 h:35 min), which was reduced by 36.2%. For medium construction, 50% of the parts can be built by the following parameters: "cross" and "on long edge" to obtain the highest strength (38.48 MPa) with 283 HV at the minimum possible time (1 h:55 min). The study could help with the growth of producing mechanically functional parts, such as prosthetics, using LM. In addition, the part can be built with high strength, hardness, and minimum building time, which is useful information for the best utilization of the 3DP machine. Also, the chosen parameters optimize the building process with little human intervention.

The effect of layer height on the surface roughness in 3D Printed Polylactic Acid (PLA) using FDM 3D printing

The effect of nozzle hole diameter of 3D printing on porosity and tensile strength parts using polylactic acid material

Response of PLA material to 3D printing speeds: A comprehensive examination on mechanical properties and production quality

Analyzing the effects of printing parameters to minimize the dimensional deviation of polylactic acid parts by applying three different decision-making approaches

Effect of process parameters on mechanical properties of PLA resin through LCD 3D printing

The Impact of Various Filling Patterns and Building Orientations on the Mechanical Characteristics and Building Time of PLA Using FDM

A response surface methodology investigation into the optimization of manufacturing time and quality for FFF 3D printed PLA parts

Investigating the impact of laser polishing parameters on surface roughness, mass ablation rate, and optical transmittance of 3D‐printed PLA substrates

Impact of process parameters on improving the performance of 3D printed recycled polylactic acid (rPLA) components

Improving surface roughness of polylactic acid (PLA) products manufactured by 3D printing using a novel slurry impact technique

Hardness, friction and wear characteristics of 3D-printed PLA polymer

ON THE SURFACE ROUGHNESS OF 3D PRINTED PARTS WITH FDM BY A LOW-BUDGET COMMERCIAL PRINTER

The effect of processing parameters on the mechanical characteristics of PLA produced by a 3D FFF printer

Effect of printing parameters and post-process on surface roughness and dimensional deviation of PLA parts fabricated by extrusion-based 3D printing

Maximizing performance and efficiency in 3D printing of polylactic acid biomaterials: Unveiling of microstructural morphology, and implications of process parameters and modeling of the mechanical strength, surface roughness, print time, and print energy for fused filament fabricated (FFF) bioparts

A Comparative Study of the Mechanical Properties of FDM 3D Prints Made of PLA and Carbon Fiber-Reinforced PLA for Thin-Walled Applications

On the optimized fused filament fabrication of polylactic acid using multiresponse central composite design and desirability function algorithm

Effects of process parameters on the quality of PLA products fabricated by fused deposition modeling (FDM): surface roughness and tensile strength

Effect of print parameters on the tensile strength and built time of FDM-printed PLA parts

Influence of slicing parameters on surface quality and mechanical properties of 3D-printed CF/PLA composites fabricated by FDM technique

Fused Filament Fabrication 3D Printing Parameters Affecting the Translucency of Polylactic Acid Parts