Abstract:Lithium-ion batteries (LIBs) are key solutions to clean energy. Their high energy densities have led to the dominance of LIBs in mobile devices and electric vehicles. However, traditional electrolyte limits their operation at high voltage and extreme environmental temperatures. Here, we designed a new multifunctional electrolyte, in which lithium bis(fluorosulfonyl)imide (LiFSI) is used as salt and fluorinated diethyl carbonate (DFDEC) is used as the major solvent. With this optimized electrolyte, the graphite||LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) full cells are capable of fast-charging and can deliver long-term cycling with a cutoff voltage as high as 4.5V. Specifically, the battery shows the capacity retention of 84.3% after 500 cycles with an average coulombic efficiency (CE) as high as 99.93%. Synchrotron-based characterization suggests the formation of anion derived, LiF-rich interphases on the surfaces of both graphite anode and NMC811 cathode. Thanks to the fast ion transport and stable interphase, the cell in the optimized electrolyte demonstrates stable cycling behavior within a wide operating temperature. At high temperature (60 oC), the full cell delivers 88.8% of its initial capacity after 130 cycles at a high current density of 1C. At low temperature (-20 oC), the optimized electrolyte enables a capacity retention of 90.9% after 100 cycles when charging and discharging at 0.2C. Acknowledgment: The work done at Brookhaven National Laboratory was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Vehicle Technology Office of the U.S. DOE through Applied Battery Research for Transportation (ABRT) program under contract no. DE-SC0012704. The electrodes used in this study were produced at the U.S. Department of Energy’s (DOE) CAMP (Cell Analysis, Modeling and Prototyping) Facility, Argonne National Laboratory. The CAMP Facility is fully supported by the DOE Vehicle Technologies Office (VTO). This research used beamline 7-ID-2 (SST-2) of the National Synchrotron Light Source II, U.S. DOE Office of Science User Facilities, operated for the DOE Office of Science by Brookhaven National Laboratory under contract number DE-SC0012704. SEM measurements for this manuscript were performed at Center for Functional Nanomaterials, a U.S. DOE office of Science User Facility, at Brookhaven National Laboratory under the contract number DE-SC0012704.

(Digital Presentation) Electrochemical Behavior of Ionic Liquid Modified of Lithium Bis(fluorosulfonyl)Imide Based Electrolyte for Lithium-Ion Batteries

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

Enhanced Li+ Transport in Ionic Liquid-Based Electrolytes Aided by Fluorinated Ethers for Highly Efficient Lithium Metal Batteries with Improved Rate Capability.

Synthesis and electrochemical performance of an imidazolium based Li salt as electrolyte with Li fluorinated sulfonylimides as additives for Li-Ion batteries

Recent Advances in Application of Ionic Liquids in Electrolyte of Lithium Ion Batteries

Preparation of Poly(ionic Liquid) Composite Quasi-Solid Electrolyte by Incorporating Metal − Organic Framework Filler Decorated with Ionic Liquid for Lithium Batteries

Solid Electrolyte Interface Film-Forming and Surface-Stabilizing Bifunctional 1,2-Bis((trimethylsilyl)oxy) Benzene As Novel Electrolyte Additive for Silicon-Based Lithium-Ion Batteries.

Effects of Difluoro(oxalato)borate-Based Ionic Liquid as Electrolyte Additive for Li-Ion Batteries

Fluorinated Carbonate‐Aided Ionic‐Liquid Electrolyte Enables High‐Capacity Lithium Metal Batteries

High-Voltage Graphite//LiNi0.5Mn1.5O4 Full Cell with Bis(fluorosulfonyl)Imide and bis(trifluoromethyl)Sulfonylimide Ionic Liquid Electrolytes

Advanced Low-Flammable Pyrrole Ionic Liquid Electrolytes for High Safety Lithium-Ion Batteries

A New Ionic Liquid-Based Electrolyte with Both High Conductivity and Electrochemical Stability

High Voltage and Safe Electrolytes Based on Ionic Liquid and Sulfone for Lithium-Ion Batteries

Protective behavior of phosphonate-functionalized imidazolium ionic liquid and its impact on the Li-ion battery performance

Single-Solvent Ionic Liquid Strategy Achieving Wide-Temperature and Ultra-High Cut-Off Voltage for Lithium Metal Batteries

(Invited) Fluorinated Linear Carbonate Electrolyte for Lithium-Ion Batteries with Fast-Charging, High Voltage, and Wide Operating Temperatures

LiAlCl4·3SO2 As a High Conductive, Non-Flammable and Inorganic Non-Aqueous Liquid Electrolyte for Lithium Ion Batteries

Taming the chemical instability of lithium hexafluorophosphate-based electrolyte with lithium fluorosulfonimide salts

Improved Composite Solid Electrolyte Through Ionic Liquid-Assisted Polymer Phase for Solid-State Lithium Ion Batteries

Preparation And Properties Of Ionic-Liquid Mixed Solutions As A Safety Electrolyte For Lithium Ion Batteries

Phosphonium ionic liquid-based electrolyte for high voltage Li-ion batteries: Effect of ionic liquid ratio