Reduction of tar from biomass gasification using a dielectric barrier discharge reactor

M Lim,Z Alimuddin
DOI: https://doi.org/10.1088/1757-899X/1195/1/012004
2021-11-02
IOP Conference Series: Materials Science and Engineering
Abstract:A non-thermal plasma reactor was used to investigate its effectiveness in reducing the by-products from biomass gasification. Biomass is used for generating heat and power through gasification, which is a process of converting solid fuel to gaseous fuel at temperatures of 700 to 900 °C by operating a reactor in sub-stoichiometric conditions. This gas mixture can be utilized for liquid fuel synthesis or for fuel cells. However, the by-product of gasification consists of tar, which consists of oxygenates, ringed-aromatics, phenolic compounds, and polyaromatic hydrocarbons (PAH). Depending on the composition, the condensation temperature can be as high as 450 °C, fouling downstream equipment. In this study, a dielectric barrier discharge (DBD) reactor with a coil as the inner electrode was used to reduce toluene, a model tar compound. Toluene was injected into a mixing chamber that was heated to 900 °C, evaporating the toluene, and is entrained by nitrogen into the DBD reactor. High voltage is injected into the DBD reactor to initiate ionization, decomposing the toluene into lighter hydrocarbons. A sampling bottle submerged in an ice bath collects the residual toluene, and the resulting decomposition rate is as high as 70%.
What problem does this paper attempt to address?