Abstract:Connected Automated Vehicles (CAVs) have the potential to improve traffic operations when they cooperatively maneuver in merging sections. State-of-the-art approaches in cooperative merging either build on heuristics solutions or prohibit mainline CAVs to change lane on multilane highways. This paper proposes a hierarchical cooperative merging control approach that ensures collision-free and traffic-efficient merging through the interaction of a maneuver planner and an operational trajectory controller. The planner predicts future vehicular trajectories, including acceleration trajectories and time instants when lane changes start, in a long horizon up to 50 seconds with a linear prediction model. It establishes the optimal dynamic vehicle sequence in each lane by minimizing predicted traffic disturbances that can propagate upstream and lead to traffic breakdown. During the process, mainline vehicles may change lane to facilitate the on-ramp merging, albeit with a higher ego cost. The operational controller follows the established instructions from the planner and regulates vehicular trajectories with model predictive control in a shorter horizon of 6 seconds. The performance of the designed hierarchical cooperative merging control approach was compared to a cooperative merging method utilizing widely used first-in-first-out rule to establish merging sequences and the same operational controller to generate vehicular trajectories. Systematic comparison shows that the proposed approach consistently results in less disturbances during merging under 528 different scenarios with different traffic states, initial vehicular states, and desired time gap settings. On average, a decrease of 39.18% in disturbances was observed.

Combining Event-Based Maneuver Selection and MPC Based Trajectory Generation in Autonomous Driving

A Dynamic Trajectory Planning Method for Lane-Changing Maneuver of Connected and Automated Vehicles

A Hybrid Planning Approach Based on MPC and Parametric Curves for Overtaking Maneuvers

Hierarchical MPC-based Motion Planning for Automated Vehicles in Parallel Autonomy

MPC-based Motion Planning for Autonomous Truck-Trailer Maneuvering

A Comparison of Trajectory Planning and Control Frameworks for Cooperative Autonomous Driving

A Unified Trajectory Planning and Tracking Control Framework for Autonomous Overtaking Based on Hierarchical MPC.

Path Planning for Autonomous Vehicles Using Model Predictive Control

Event-triggered MPC for Collision Avoidance of Autonomous Vehicles Considering Trajectory Tracking Performance

Simultaneous Trajectory Planning and Tracking Using an MPC Method for Cyber-Physical Systems: A Case Study of Obstacle Avoidance for an Intelligent Vehicle

A Seamless Motion Planning Integrating Maneuver Decision Based on Hybrid Model Predictive Control

Collision Avoidance Path Planning and Tracking Control for Autonomous Vehicles Based on Model Predictive Control

Hierarchical Optimal Maneuver Planning and Trajectory Control at On-Ramps With Multiple Mainstream Lanes

Maneuver-Based Trajectory Planning for Highly Autonomous Vehicles on Real Road With Traffic and Driver Interaction

Neural MPC-Based Decision-Making Framework for Autonomous Driving in Multi-Lane Roundabout

Study on Lane-Change Replanning and Trajectory Tracking for Intelligent Vehicles Based on Model Predictive Control

Interaction-aware Model Predictive Control for Autonomous Driving

Model Predictive Trajectory Planning for Automated Driving

Mixed Local Motion Planning and Tracking Control Framework for Autonomous Vehicles Based on Model Predictive Control

Path Planning and Cooperative Control for Automated Vehicle Platoon Using Hybrid Automata

Lane-Exchanging Driving Strategy for Autonomous Vehicle via Trajectory Prediction and Model Predictive Control