Fabricating Potentiometric Biosensors Using 3D Printing

Dalton Lee Glasco,Melissa King,Jeffrey Gordon Bell

DOI: https://doi.org/10.1149/ma2022-01532216mtgabs

2022-07-15

ECS Meeting Abstracts

Abstract:Potentiometry, the use of ion-selective electrodes (ISEs), has been incorporated in many point-of-care (POC) applications due to its selectivity and sensitivity. Importantly, ISEs can be translated to low-cost POC devices (e.g., paper-based, thread-based, etc.), making them ideal candidates for commercial applications as they cover many of the guidelines established by the World Health Organization for successful diagnostics in low to middle income countries. Biosensors are an important class of diagnostic tools used to increase specificity and sensitivity for a particular analyte through the incorporation of molecular recognition elements, aptamers, enzymes, etc. Potentiometric enzymatic biosensors have previously been fabricated where an enzyme is immobilized into an ion-selective membrane (ISM) and used to convert important biomarkers into detectable ions for potentiometric sensing. Although this approach has been previously demonstrated using conventional PVC-based ISMs, the lack of mass production capabilities and the routinely high cost of individual membranes has hindered the advancement of deliverable POC devices for potentiometric biosensing. We recently reported a 3D printing protocol for the fabrication of ISMs, which was shown to reduce both the cost associated with sensor fabrication as well as the time. Herein we report on the advancement of 3D printing techniques to fabricate biosensing membranes for their use in POC applications.