Abstract:Nanofluids are engineered materials which are basically colloidal substances prepared by the dispersion of metallic/metallic oxide nanoparticles into a suitable base fluid. The two different phases in nanofluids (solid and liquid) result in entirely different thermophysical properties from the separated phases. The properties exhibited by nanofluids have inspired the researchers to analyze them under a variety of backgrounds. The effectiveness of CuO/water nanofluids in cooling of a smartphone processor is investigated and compared to water in this work. The cross-sectional area for heat dissipation from a processor is obtained from its datasheet. In the first step, numerical analysis is done with water as the medium of heat transfer with a heat flux, and then, experiment is performed using CuO/water nanofluid as heat transfer medium for four volume fractions 0.1%, 0.2%, 0.3% and 0.4% and fluid gap thicknesses as done in the case of water. The heat transfer through nanofluid will be effective only if both the base fluid and nanofluid are in the same mode of heat transfer—either conduction or convection. The mode of heat transfer depends on a number of factors such as temperature, fluid layer thickness, nanoparticle volume fraction, etc. A numerical and experimental investigation on the impact of these parameters is done in this paper using cupric oxide–water nanofluid. It is concluded that the advantage obtained by the increased thermal conductivity of the nanofluid due to the addition of nanoparticles will be offset by the delayed convection onset resulting in a reduced overall heat transfer enhancement when compared to base fluid. Since the convection process is aided by increased temperature, a nanofluid is suitable for enhanced heat transfer under conditions of high heat flux densities and for miniaturized systems where cooling system space is a significant limitation.

Investigating the effect of nanoparticles diameter on turbulent flow and heat transfer properties of non-Newtonian carboxymethyl cellulose/CuO fluid in a microtube

Convective Heat Transfer and Resistance Characteristics of Nanofluids with Cylindrical Particles

Impact of hall and ion slip in a thermally stratified nanofluid flow comprising Cu and Al2O3 nanoparticles with nonuniform source/sink

Numerical investigation of turbulent flow and heat transfer of nanofluid inside a wavy microchannel with different wavelengths

Effects of buoyancy and centrifugal forces on the nanofluid mixed convection in a 3D curved horizontal microtube using a two-phase mixture approach

Effect of nano-fluid types on the improvement of heat transfer in a micro-channel with regular hexagonal pattern

Investigating the influence of temperature-dependent rheological properties on nanofluid behavior in heat transfer

Numerical simulation of heat transfer and turbulent flow of water nanofluids copper oxide in rectangular microchannel with semi-attached rib

Effects of Nanofluid Flow in Micro channel Heat Sink for Forced Convection Cooling of Electronics Device: A Numerical Simulation

Numerical investigation of the nanoparticles nature effect on the mhd behavior in a square cavity with a metallic obstacle

Computational Modelling and Simulations to Study the Thermal Enhancement in Nanofluid Flow in Undulating Wavy Cavity of a Cylinder: Finite Element Analysis

A Numerical Investigation of Transient Natural Convection Heat Transfer of Aqueous Nanofluids in A Horizontal Concentric Annulus

Investigation of Mixed Convection in a Cylindrical Lid Driven Cavity Filled with Water-Cu Nanofluid

Numerical investigation of nanofluid laminar forced convection heat transfer between two horizontal concentric cylinders in the presence of porous medium

Impact of colloidal properties of cupric oxide-water nanofluid on cooling of miniaturized systems: a numerical and experimental investigation

Molecular dynamics simulation of thermal behavior of nanofluid flow in a nanochannel with Cetryltrimethylammoniu Bromide surfactant molecules

Numerical investigation on forced convection in rectangular cross section micro-channels with nanofluids

Thermal and Flow Visualization of a Square Heat Source in a Nanofluid Material with a Cubic-Interpolated Pseudo-particle

Numerical Analysis of MHD Nanofluid Flow Characteristics with Heat and Mass Transfer over a Vertical Cone Subjected to Thermal Radiations and Chemical Reaction

Effects of copper and titania nanoparticles on MHD 3D rotational flow over an elongating sheet with convective thermal boundary condition

Analysis of Metallic Nanoparticles (Cu, Al2O3, and SWCNTs) on Magnetohydrodynamics Water-Based Nanofluid through a Porous Medium