Abstract:Next generation lithium-ion batteries (LIB) with high energy density and high power density have recently become of great interest for electric vehicle and portable devices. With the further upgrade of especially electric vehicles, the next generation LIB with high power and high energy density is urgently required. For this purpose, composite electrode consisting of commercially available graphite active material mixed with silicon nanoparticles is under current development. The main objectives are a significant increase of the practical capacity and energy density of commercial anodes, an overcome of the drawbacks of pure silicon due to large volume changes during electrochemical cycling, and the development of a technology suitable for mass production. In order to reduce the intrinsic mechanical stress of silicon/graphite electrodes and to improve the lithium-ion transport kinetic, free-standing electrode structures were generated by applying ultrafast industrial capable laser material processing. This advanced laser technology is demonstrated to be a flexible and powerful tool for pushing silicon/graphite (Si/C) composite anode materials beyond state of the art electrodes towards application. The electrochemical properties of cells with unstructured and structured electrodes were systematically analyzed by means of cyclic voltammetry, galvanostatic measurements, and electrochemical impedance spectroscopy. The increased active surface enables a significant improvement of lithium-ion diffusion kinetics. Furthermore, it is expected that the increased active surface will also provide additional artificial porosity for active material expansion, which in turn will reduce the mechanical stress within the electrodes during lithiation or delithiation. In this context, in-situ scanning electron microscopy (SEM) was performed in order to analyze the active material volume changes during charging and discharging. A main engineering challenge was to optimize the electrode architecture such as the pitch distance of free-standing structures regarding an enhanced electrochemical performance and a reduced material loss. Furthermore, an alumina (Al2O3) layer with a thickness of 5 nm, which acts as an artificial SEI, was coated on structured silicon/graphite electrodes by applying Atomic Layer Deposition (ALD). Cyclic voltammetry measurements were subsequently performed in order to investigate the fundamental properties of cells with structured and Al2O3- coated silicon/graphite electrodes. Galvanostatic measurements reveal that the cells with structured electrodes exhibit excellent electrochemical properties, i.e., a significantly improved capacity retention. ALD layers can contribute to further improvement of cycle stability and cell lifetime. In addition, advanced full cells with Lithium Nickel Manganese Cobalt Oxide NMC622 as cathode and Si/C as counter electrode were assembled and the electrochemical data will be presented.

Camphene-Assisted Fabrication of Free-Standing Lithium-Ion Battery Electrode Composites

(Invited) Manufacturing and Characterization of Advanced High Energy Silicon/Graphite Electrodes

Fabrication of Composite Gel Electrolyte and F-Doping Carbon/Silica Anode from Electro-Spun P(VDF-HFP)/Silica Composite Nanofiber Film for Advanced Lithium-Ion Batteries

Self-Assembled Cauliflower-Like Fes2 Anchored into Graphene Foam As Free-Standing Anode for High-Performance Lithium-Ion Batteries

Green and up-scalable fabrication of superior anodes for lithium storage based on biomass bacterial cellulose

Enabling a scalable composite solid electrolyte via cathode-supported scale-up processing

In situ anchoring of FeNi nanoparticles into three-dimensional nitrogen-doped carbon framework as a self-supporting electrode for high-performance lithium storage

Free-standing ZnSe-CoFe@CNT/CNF heterostructure nanofibers as an ultra-long lifespan and high-rate anode for flexible lithium ion and sodium ion batteries

Sb Nanoparticles Embedded in the N-Doped Carbon Fibers as Binder-Free Anode for Flexible Li-Ion Batteries

Electrodeposited Carbon@fe2o3 Composites As Binder-Free Anodes for Lithium Ion Batteries

Coupling a 3D Lithophilic Skeleton with a Fluorine-Enriched Interface to Enable Stable Lithium Metal Anode

Binder-Free Electrode based on Electrospun-Fiber for Li Ion Batteries via a Simple Rolling Formation

From the Direct Observation of a PAA‐Based Binder Using STEM‐VEELS to the Ageing Mechanism of Silicon/Graphite Anode with High Areal Capacity Cycled in an FEC‐Rich and EC‐Free Electrolyte

Constructing Lithium-Free Anode/Separator Interface via 3D Carbon Fabric Scaffold for Ultrasafe Lithium Metal Batteries

Facile Fabrication of Free-Standing and Flexible Anodes Composed of Entangled N-Doped Carbon Nanotubes for Application in Lithium Ion Batteries

Polymorph Engineering for Boosted Volumetric Na‐Ion and Li‐Ion Storage

Realizing High Energy Density and Flexibility of Fabric Electrode through Hierarchical Structure Design

Carbon Nanofiber-Based Sandwich Free-Standing Cathode for High-Performance Lithium-Sulfur Batteries

Layer-by-Layer Self-Assembled Nanostructured Electrodes for Lithium-Ion Batteries

3D Porous Cu-Composites for Stable Li-Metal Battery Anodes

Screen‐Printed Composite LiFePO4‐LLZO Cathodes Towards Solid‐State Li‐ion Batteries