Abstract:Regular borehole sampling and laboratory tests have a long process, many disturbances and the risk of large errors. Hence, it is difficult to quickly and accurately obtain the geotechnical parameters in scientific calculations. The Cone Penetration Test (CPT) is an in-situ testing technique with a wide range of applications and high data quality. However, CPT data (cone resistance, q c , and sleeve friction, f s ) cannot be directly converted into geotechnical parameters. The fundamental reason is the lack of mathematical-physical methods that establish the relationship between geotechnical parameters and CPT data. This study proposes a stochastic discrete-continuum coupling method to calibrate the geotechnical parameters. The deterministic and stochastic relationship between CPT data and geotechnical parameters is established. Firstly, the macroscopic and microscopic constitutive models are introduced. Secondly, a Bayesian sampling algorithm based on the Markov chain Monte-Carlo (MCMC) method is combined with the coupling mechanism. Finally, two examples verify the rationality of the stochastic discrete-continuum coupling method. CPT data of Ottawa 20–30 sand is used as the research objective, the prediction results are compared with the real results through numerical calculation, and effectiveness of the deterministic discrete-continuum coupling method is verified. Then, based on the coupling numerical model, the shallow bearing stratum in Shanghai, namely 2 1 silty clay, is taken as an example, and the geotechnical parameters are calibrated. The predicted values of CPT data based on the posterior distributions are closer to the measurements than the prior reconnaissance information. In the engineering practice, the mechanism and statistics between the geotechnical parameters and CPT data are revealed, it provides a new idea for calibrating geotechnical parameters.

Improved cone penetration test predictions of the state parameter of loose mine tailings

Assessing the Bearing Capacity of Backfills by Stress Wave Velocity and Cone Penetration Resistance

Calibration of Geotechnical Parameters Based on the Stochastic Discrete-continuum Coupling Method and Bayesian Theory

A combined experimental and numerical study on the triaxial and dynamic compression behavior of cemented tailings backfill

Discrete element model (DEM) simulations of cone penetration test (CPT) measurements and soil classification

Stability Assessment of a Tailings Storage Facility Using a Non-local Constitutive Model Accounting for Anisotropic Strain-Softening

Numerical simulation of cone penetration test by using CFD–DEM coupled analysis

Response surface methodology-based characterization and optimization of fibre reinforced cemented tailings backfill with Slag

A novel experimental database on the cyclic response of mine tailings

A new shared miniature cone penetrometer for centrifuge testing

Analysis of Liquefaction in Tailings Deposits by Fem Modeling of Undrained Cyclic Triaxial

A Particle Size Distribution Model for Tailings in Mine Backfill

Tailings Behavior Assessment Using Piezocone Penetration Test

Mechanical Characteristics of Tailings in Different Depositional Zones: A Case Study of Caijiagou Tailings Pond in Shaanxi, China

A relation between undrained CPTu results and the state parameter for liquefiable soils

Analytical analysis of spherical cavity expansion considering particle breakage effect of sand and its application for CPT tests

A metamodel for confined yield stress flows and parameters' estimation

Research on Slurry Flowability and Mechanical Properties of Cemented Paste Backfill: Effects of Cement-to-Tailings Mass Ratio and Mass Concentration

Spatial evolution characteristics of the mechanical properties of gangue-cemented paste backfill with high-water-content materials: an experimental investigation

Strength Characteristics and Failure Mechanism of Cemented Super-Fine Unclassified Tailings Backfill