Abstract:Whisker sensors are a class of tactile sensors that have recently attracted attention. Inspired by mammals’ whiskers known as mystacial vibrissae, they have displayed tremendous potential in a variety of applications e.g., robotics, underwater vehicles, minimally invasive surgeries, and leak detection. This paper provides a supplement to the recent tactile sensing techniques’ designs of whiskers that only sense at their base, as well as the materials employed, and manufacturing techniques. The article delves into the technical specifications of these sensors, such as the resolution, measurement range, sensitivity, durability, and recovery time, which determine their performance. The sensors’ sensitivity varies depending on the measured physical quantity; for example, the pressure sensors had an intermediate sensitivity of 58%/Pa and a response time of around 90 ms, whereas the force sensors that function based on piezoelectric effects exhibited good linearity in the measurements with a resolution of 3 μN and sensitivity of 0.1682 mV/μN. Some sensors were used to perform spatial mapping and the identification of the geometry and roughness of objects with a reported resolution of 25 nm. The durability and recovery time showed a wide range of values, with the maximum durability being 10,000 cycles and the shortest recovery time being 5 ms. Furthermore, the paper examines the fabrication of whiskers at the micro- and nanoscales, as well as their contributions to mechanical and thermal behavior. The commonly used manufacturing techniques of 3D printing, PDMS casting, and screen printing were used in addition to several micro and nanofabrication techniques such as photolithography, etching, and chemical vapor deposition. Lastly, the paper discusses the main potential applications of these sensors and potential research gaps in this field. In particular, the operation of whisker sensors under high temperatures or high pressure requires further investigation, as does the design of sensors to explore larger topologies.

3D Printed Graphene Piezoresistive Microelectromechanical System Sensors to Explain the Ultrasensitive Wake Tracking of Wavy Seal Whiskers

Wavy Whiskers in Wakes: Explaining the Trail-Tracking Capabilities of Whisker Arrays on Seal Muzzles

Underwater bionic whisker sensor based on triboelectric nanogenerator for passive vortex perception

Biomimetic Hydrodynamic Sensor with Whisker Array Architecture and Multidirectional Perception Ability

Design of Whisker-Inspired Sensors for Multi-Directional Hydrodynamic Sensing

Bioinspired Whisker Sensor Based on Orthometric FBGs for Underwater Applications

Flow-signal correlation in seal whisker array sensing

Deep-learning-assisted triboelectric whisker for near field perception and online state estimation of underwater vehicle

Deep‐Learning‐Assisted Triboelectric Whisker Sensor Array for Real‐Time Motion Sensing of Unmanned Underwater Vehicle

Whisker-Inspired Tactile Sensing: A Sim2Real Approach for Precise Underwater Contact Tracking

Undulating Seal Whiskers Evolved Optimal Wavelength‐to‐Diameter Ratio for Efficient Reduction in Vortex‐Induced Vibrations (Adv. Sci. 2/2024)

Review of Recent Bio-Inspired Design and Manufacturing of Whisker Tactile Sensors

Whisker-inspired and self-powered triboelectric sensor for underwater obstacle detection and collision avoidance

Whisker‐Implanted Biomimetic Electronic Skin for Tactile Sensing and Blind Perception

Shape Classification Using a Single Seal-Whisker-Style Sensor Based on the Neural Network Method

Bionic Tactile Sensor based on Triboelectric Nanogenerator for Motion Perception

Bioinspired Electronic Whisker Arrays by Pencil‐Drawn Paper for Adaptive Tactile Sensing

Self-sustained oscillations in whiskers without vortex shedding

A Bio-Inspired Whisker Sensor Based on Triboelectric Nanogenerators

A novel whisker sensor with variable detection range for object positioning

Bioinspired Whisker Sensor for 3D Mapping of Underground Mining Environments