Abstract:In the past few decades, several robust designs dealing with disturbances in batch processes have been developed. The previous methods hold the viewpoint that all disturbances are harmful because they may drive the trajectory off the nominal optimal trajectory and lead to economic loss and safety issues. Are disturbances definitely detrimental? Actually, from the economic viewpoint, not all the disturbances are unfavorable to operating batch processes. To utilize disturbances fully for the improvement of the economic performance, disturbances are first divided into favorable and unfavorable types in this paper. An alternate feedback control (AFC) method is proposed to switch the feedback gains according to the types of disturbances, holding favorable disturbances and rejecting unfavorable disturbances. As a result, AFC will lead to an asymmetrical distribution of the trajectory. It is quite different from conventional feedback control (CFC), which rejects both favorable and unfavorable disturbances and leads to a symmetrical distribution. Second, because disturbances are the source of the variation and state errors are the combination of the previous state errors, control inputs, and disturbances, a disturbance-based feedback scheme is developed for AFC in this paper. Unlike traditional error-based feedback whose feedback gain acts on the state errors, the feedback gains of AFC act on the disturbances directly. Finally, a design combining robust economic optimization and AFC regulation is proposed for economic performance improvement and quick implementation of the regulation. The parameters of the online AFC are given by the robust economic optimization. This design can avoid the mismatch between the optimization layer and the regulating layer. Additionally, there will not be any computational burden for the novel design since the difficult and complex problem can be done offline and then AFC is implemented online using the gains generated offline. The optimality and the potential applications of the proposed integrated design are demonstrated through a typical dynamic batch reactor process.

A novel equilibrium optimized double-loop control scheme for unstable and integrating chemical processes involving dead time

A Closed-Loop Particle Swarm Optimizer for Multivariable Process Controller Design

Design and simulation of a novel FOIMC-PD/P double-loop control structure for CSTRs and bioreactors

Integrated Operation Design and Control of Organic Rankine Cycle Systems with Disturbances

ILC Based Economic Optimization for Batch Processes Using Helpful Disturbance Information

New PI-PD Controller Design Strategy for Industrial Unstable and Integrating Processes with Dead Time and Inverse Response

A Retrofit Hierarchical Architecture for Real-Time Optimization and Control Integration

Disturbance-Based Alternate Feedback Control Scheme to Enhance Economic Performance of Batch Processes

Pseudo Feedforward Dynamic Matrix Control Algorithm for Desired Closed-Loop Performance in MPC Systems

Structure Restricted (PID) Controller Performance Assessment for Multi-Stage Batch Processes with Tracking and Regulatory Requirements

An Explicit Optimizing Control Approach Based on Output Feedback

Modeling and Control of a Continuous Stirred Tank Reactor Based on a Mixed Logical Dynamical Model

A Proposal on Centralised and Distributed Optimisation Via Proportional-Integral-derivative Controllers (PID) Control Perspective

Experimentally verified optimal bi-loop re-located IMC strategy for unstable and integrating systems with dead time

PSO-Based PID Controller Design for a Class of Stable and Unstable Systems

Direct synthesis based sliding mode controller design for unstable second order with dead-time processes with its application on continuous stirred tank reactor

Controller design on a new 2DOF PID structure for different processes having integrating nature for both the step and ramp type of signals

Enhanced Imc Design of Load Disturbance Rejection for Integrating and Unstable Processes with Slow Dynamics

Optimal iterative learning PI controller for SISO and MIMO processes with machine learning validation for performance prediction

Study on Dynamic Behavior Adjustment of Nonlinear Chemical Processes

Desired-dynamics-based Design of Control Strategy for Multivariable System with Time Delays