Abstract:To select rational parameters of the process of hybrid additive manufacturing of structures made of structural metal alloys and stainless steels, mechanical characteristics capable of serving as indicators of material quality were determined. The most advanced technologies of additive manufacturing by wire-arc surfacing (plasma, plasma arc with a melting electrode, including cold metal transfer) with layer-by-layer forging with a pneumatic impact tool and subsequent heat treatment were used. Aluminum-magnesium alloy AlMg5, titanium alloy Ti-6Al-4V, austenitic stainless steels 12Cr18Ni10Ti (AISI 321) and AISI 308LSi have been studied. Samples were cut from the blanks created by additive manufacturing – blades for standard tests for static uniaxial tension and cylinders for high-speed compression tests by the Kolsky method on a Hopkinson split bar. According to the registered and processed stress–strain curves for all materials, standard strength and ductility characteristics and the Johnson – Cook law of deformation and speed hardening were determined. For a correct assessment of the mechanical properties of additively produced materials, these tests were also carried out for each of them in the form of annealed rolled products. It is established that to compare the efficiency of various technological parameters of additive manufacturing, it is advisable to use static tensile strength and uniform elongation to rupture, having the smallest statistical variation. It was also found acceptable to approximate the Johnson – Cook law of the deformation curves of each of the studied materials according to averaged data, including various technological modes. Certain mechanical characteristics seem to be necessary for the search for effective modes of hybrid additive manufacturing and numerical calculation of various elastic-plastic problems in a dynamic formulation for the studied materials for design and technological needs.

Microstructure and Mechanical Properties of the Bimetallic Wire Arc Additively Manufactured Structure (BAMS) of SS304L and SS308L Fabricated by Hybrid Manufacturing Process

Microstructure and Mechanical Properties of 304L Steel Fabricated by Arc Additive Manufacturing

Fabrication of Bimetallic Structure (SS 316L/SS 308L) via Wire + Arc Additive Manufacturing: A Detailed Characterization of Interface

Improving mechanical strength and isotropy for wire-arc additive manufactured 304L stainless steels via controlling arc heat input

Improve the Manufacturing Efficiency of Steel Bars by Using Hot-Wire Pulse Arc Additive Manufacturing

Fabrication of bimetallic additively manufactured structure (BAMS) of low carbon steel and 316L austenitic stainless steel with wire + arc additive manufacturing

Wire Arc Additive Manufactured Mild Steel and Austenitic Stainless Steel Components: Microstructure, Mechanical Properties and Residual Stresses

Wire-arc-additively manufactured Bi metallic structure: Mechanical properties and microstructural characterization

A study on wire arc additive manufacturing of 308L austenitic stainless steel cylindrical components: Optimisation, microstructure and mechanical properties

An approach to tunable advanced high-strength steel fabrication through multi-wire arc additive manufacturing (M-WAAM)

Microstructure and Mechanical Properties of Wire Arc Additively Manufactured Bimetallic Structure of Austenitic Stainless Steel and Low Carbon Steel

Fabrication and characterization of austenite-ferrite stainless steel bimetals by twin wire arc additive manufacturing

Experimental characteristics of 316L stainless steel thin wall processed in wire-based arc additive manufacturing process

Enhanced Strength-Ductility Synergy of Bimetallic Laminated Steel Structure of 304 Stainless Steel and Low-Carbon Steel Fabricated by Wire and Arc Additive Manufacturing

Study and Characterisation of Bimetallic Structure (316LSI and S275JR) Made by Hybrid CMT WAAM Process

Microstructural and mechanical properties analysis of SS 316L structure fabricated using CMT-wire arc additive manufacturing

Experimental study of shielding gas concentration on mechanical properties of stainless steel alloy parts using wire and arc additive manufacturing

Technology Development for Producing Inconel 625 in Aerospace Application Using Wire Arc Additive Manufacturing Process

Fabrication of Bimetallic High-Strength Low-Alloy Steel/Si-Bronze Functionally Graded Materials Using Wire Arc Additive Manufacturing

Investigations and Multi-response Optimization of Wire Arc Additive Manufacturing Cold Metal Transfer Process Parameters for Fabrication of SS308L Samples

Strength And Ductility Characteristics Of Metal Alloys And Stainless Steels Created By Wire-Arc Surfacing In A Wide Range Of Strain Rates