Co-catalysis of trace dissolved Fe(III) with biochar in hydrogen peroxide activation for enhanced oxidation of pollutants

Dongqing Feng,Jianxin Shou,Sen Guo,Mengna Ya,Jianfa Li,Huaping Dong,Yimin Li

DOI: https://doi.org/10.1039/d2ra01647h

IF: 4.036

2022-06-11

RSC Advances

Abstract:Activation of hydrogen peroxide (H 2 O 2 ) with biochar is a sustainable and low-cost approach for advanced oxidation of organic pollutants, but faces the challenge of a low yield of hydroxyl radical ( ̇OH). Herein, we hypothesize that the activation efficiency of H 2 O 2 can be enhanced through co-catalysis of trace dissolved iron (Fe) with biochar. Two biochar samples derived from different feedstock, namely LB from liquor-making residue and WB from wood sawdust, were tested in the co-catalytic systems using trace Fe( III ) (0.3 mg L −1 ). The cumulative ̇OH production in [Fe( III ) + LB]/H 2 O 2 was measured to be 3.28 times that in LB/H 2 O 2 , while the cumulative ̇OH production in [Fe( III ) + WB]/H 2 O 2 was 11.9 times that in WB/H 2 O 2 . No extra consumption of H 2 O 2 was observed in LB/H 2 O 2 or WB/H 2 O 2 after addition of trace Fe( III ). Consequently, the reaction rate constants ( k obs ) for oxidation of pollutants (2,4-dichlorophenoxyacetic acid and sulfamethazine) were enhanced by 3.13–9.16 times. Other iron species including dissolved Fe( II ) and iron minerals showed a similar effect on catalyzing 2,4-D oxidation by biochar/H 2 O 2 . The interactions involved in adsorption and reduction of Fe( III ) by biochar in which the defects acted as electron donors and oxygen-containing functional groups bridged the electron transfer. The fast regeneration of Fe( II ) in the co-catalytic system resulted in the sustainable ̇OH production, thus the efficient oxidation of pollutants comparable to other advanced oxidation processes was achieved by using dissolved iron at a concentration as low as the concentration that can be found in natural water.

chemistry, multidisciplinary