Abstract:To achieve the goal of net zero by 2050, carbon dioxide emissions must be reduced using carbon–neutral fuels, and methanol is a feasible choice for gas turbines, IC engines, and furnaces. Methanol can be prepared by bio-process or thermal catalytic processes, but the crude product contains much water. Crude methanol must be dehydrated into high-grade methanol to enable its use as fuel. The dehydration process is the most energy-intensive step in methanol production. Therefore, this study investigated the feasibility of adding different proportions of water to methanol as a fuel for plasma-assisted spray combustion by using low-power gliding arc plasma. Based on the current sprayer setup, using plasma to sustain water-content methanol is more energy-efficient than refining it. The results delineate that plasma can sustain the combustion of methanol in a spray, even when the methanol contains 60 % water. The length and lift-off height of the flame are related to the water content of the fuel. To illustrate this distinguishing phenomenon, this study used CH and OH fluorescence to conduct a more in-depth analysis. The distribution of CH* radicals indicated that the gliding arc plasma enhanced the flame heat release rate, which may be why the flammability limit extended to greater proportions of water with methanol. It's fascinating to observe that blended fuel with higher water content can result in higher OH chemiluminescence signals. This suggests that the dissociation of water vapor, caused by the thermal effect of the gliding arc, plays a crucial role at the flame base locations. In addition, the flammability limits, emissions, and combustion efficiency of methanol/water spray combustion with and without plasma assistance were all examined.

One-step direct conversion of methane to methanol with water in non-thermal plasma

Ammonia Synthesis Via Nitrogen-Coupled Methane Conversion at Ambient Temperature and Plasma Conditions

One-Step Synthesis of Methanol and Hydrogen from Methane and Water Using Non-Thermal Plasma and Cu-Mordenite Catalyst

Efficient Conversion of Methane to Aromatics in the Presence of Methanol at Low Temperature

Methane Incorporation into Liquid Fuel by Non-Equilibrium Plasma Discharges

Enhancing Low-Temperature Methane Conversion on Zn/ZSM-5 in the Presence of Methanol by Regulating the Methanol-to-aromatics Reaction Pathway

Experimental investigation of the plasma-assisted spray combustion of methanol/water mixtures

Plasma‐catalytic one‐step steam reforming of methane to methanol: Revealing the catalytic cycle on Cu/mordenite

Electrothermal Conversion of Methane to Methanol at Room Temperature with Phosphotungstic Acid

Hybrid plasma catalysis-thermal system for non-oxidative coupling of methane to ethylene and hydrogen

Plasma Catalytic Non-Oxidative Conversion of Methane into Hydrogen and Light Hydrocarbons

Non-thermal plasma catalysis of methane: Principles, energy efficiency, and applications

Enhanced hydrogen production by methanol decomposition using a novel rotating gliding arc discharge plasma

Synthesis of oxygenated compounds from methane, carbon dioxide and water in liquid phase using a plasma-catalytic system

Non-oxidative Decomposition of Methanol into Hydrogen in a Rotating Gliding Arc Plasma Reactor

Temperature-independent, nonoxidative methane conversion in nanosecond repetitively pulsed DBD plasma

Energy pooling mechanism for catalyst-free methane activation in nanosecond pulsed non-thermal plasmas

High conversion of methane to methyl ester at 298 K

Bi-reforming of Methane in a Carbon Deposit-Free Plasmatron with High Operational Adaptability

Enhanced methanol selectivity and synthesis in a non-catalytic dielectric barrier discharge (DBD) plasma reactor

Plasma-Enhanced Chemical Looping Oxidative Coupling of Methane through Synergy between Metal-Loaded Dielectric Particles and Non-Thermal Plasma