Abstract:This paper proposes firstly a Second Order Sliding Mode Control (SOSMC) based on a Super Twisting Algorithm (STA) (SOSMC-STA) combined with a Direct Field-Oriented Control (DFOC) strategy of a Five-Phase Induction Motor (FPIM). The SOSMC-STA is suggested for overcoming the shortcomings of the Proportional Integral Controller (PIC) and the Conventional Sliding Mode Controller (CSMC). Indeed, the main limitations of the PIC are the slower speed response, the tuning difficulty of its parameters, and the sensitivity to changes in system parameters, including variations in process dynamics, load changes, or changes in setpoint. It is also limited to linear systems. Regarding the CSMC technique, its limitation is the chattering phenomenon, characterized by the rapid switching of the control signal. This phenomenon includes high-frequency oscillations which induce wear and tear on mechanical systems, adversely affecting performance. Secondly, this paper also proposes a Loss Model Controller (LMC) for FPIM energy optimization. Thus, the suggested LMC chooses the optimal flux magnitude required by the FPIM for each applied load torque, which consequently reduces the losses and the FPIM efficiency. The performance of the optimized DFOC-SOSMC-STA based on the LMC is verified using numerical simulation under the Matlab environment. The analysis of the simulation results shows that the DFOC-SOSMC-STA guarantees a high dynamic response, chattering reduction, good precision, and robustness in case of external load or parameter disturbances. Moreover, the DFOC-SOSMC-STA, combined with the LMC, reduces losses and increases efficiency.

Sliding mode controller design based on simple closed loop set point experiment for higher order processes with dead time

Sliding Mode Prediction Based Control Algorithm for Discrete-Time Non-Linear Uncertain Coupled Systems.

Adaptive Terminal Sliding Mode Control for High-Order Nonlinear Dynamic Systems

Adaptive Sliding Mode-Like Fuzzy Logic Control for High Order Nonlinear Systems

A Closed-Loop Particle Swarm Optimizer for Multivariable Process Controller Design

Pid-Based Sliding Mode Controller for Nonlinear Processes

Direct synthesis based sliding mode controller design for unstable second order with dead-time processes with its application on continuous stirred tank reactor

Design of Sliding Mode PID Controller with Improved reaching laws for Nonlinear Systems

Extended Dissipative Sliding-Mode Control for Discrete-Time Piecewise Nonhomogeneous Markov Jump Nonlinear Systems

Discrete Adaptive Second Order Sliding Mode Controller Design with Application to Automotive Control Systems with Model Uncertainties

A discrete output feedback 2-SMC using Linear Matrix Inequalities and adaptive switching gain approaches: Real application on a chemical reactor

Optimization-based Adaptive Neural Sliding Mode Control for Nonlinear Systems with Fast and Accurate Response under State and Input Constraints

Sliding Mode Control of Discrete-Time Switched Systems with Repeated Scalar Nonlinearities

An Internal Model Based—Sliding Mode Control for Open-Loop Unstable Chemical Processes with Time Delay

An Adaptive Solution for Sliding Mode Controllers Based on PID Tuning Gains

Integral surface based Second Order Sliding Mode Controller design for Inverted Pendulum with PD SMC Compensation

Sliding mode control design based on the state-dependent Riccati equation: theoretical and experimental implementation

Feedforward-plus-sliding mode controller design with experimental application of coupled tank system

Chattering-free and Fast-Response Sliding Mode Controller

Sliding Mode Control Design: a Sum of Squares Approach

Loss Model Control for Efficiency Optimization and Advanced Sliding Mode Controllers with Chattering Attenuation for Five-Phase Induction Motor Drive