Abstract:A new phenomenon of pulsation of steam permeability is discovered. The permeability of high‐temperature steam in coal shows a periodic pulsation pattern with an increase in the injection time. A two‐phase flow theory of gas–liquid is adopted to elucidate the mechanism of pulsating seepage of steam. The effect of steam temperature on permeability presents two forms of expansion mechanisms. Chinese coal reservoirs are characterized by low pressure and low permeability, which need to be enhanced so as to increase production. However, conventional methods for permeability enhancement can only increase the permeability in fractures, but not the ultra‐low permeability in coal matrices. Attempts to enhance such impermeable structures lead to rapid attenuation of gas production, especially in the late stage of gas extraction. Thermal stimulation by injecting high‐temperature steam is a promising method to increase gas production. The critical scientific challenges that still hinder its widespread application are related to the evolution law of permeability of high‐temperature steam in coal and the thermal deformation of coal. In this study, an experimental approach is developed to explore the high‐temperature steam seepage coupled with the thermal deformation in coal under triaxial stress. The tests were conducted using cylindrical coal specimens of φ50 mm × 100 mm. The permeability and thermal strain in coal were investigated when high‐temperature steam was injected at 151.11, 183.20, 213.65, and 239.76°C. The experimental results reveal for the first time that as the amount of injected fluid increases, the steam permeability shows periodic pulsation changes. This paper introduces and explains the main traits of this discovery that may shed more light on the seepage phenomenon. When the injected steam temperature increases, the amplitude of pulsating permeability decreases, whereas the frequency increases; meanwhile, the period becomes shorter, the pulsation peak appears earlier, and the stabilization time becomes longer. The average peak permeability shows a "U‐shaped" trend, decreasing first and then increasing as the steam temperature increases. Meanwhile, with the extension of steam injection time, the axial, radial, and volumetric strains of coal show a stage‐wise expansion characteristic at different temperatures of steam injection, except for the radial strains at 151.11°C. A two‐phase flow theory of gas–liquid is adopted to elucidate the mechanism of pulsating seepage of steam. Moreover, the influencing mechanism of inward and outward thermal expansion on the permeability of coal is interpreted. The results presented in this paper provide new insight into the feasibility of thermal gas recovery by steam injection.

Analysis of the permeability evolution law of in situ steam pyrolysis of bituminous coal combing with in situ CT technology

Analysis of fracture structure evolution of bituminous coal subjected to in situ steam pyrolysis combined with in situ micro-computed tomography technology

Analysis of pore-fracture structure evolution and permeability in tar-rich coal under high-temperature pyrolysis using μCT technology

Experimental Study on Permeability Evolution of Bituminous Coal Under High Temperature and Volumetric Stress

Analytical solution and evolution process of gas permeability coefficient on typical hard-soft composite coal seam

μCT quantitative assessment of the pore–fracture structures and permeability behaviors of long-flame coal treated by infrared rapid heating

Experimental Investigation of Pore Pressure Effect on Coal Sample Permeability Under Different Temperatures

Porosity Changes in Thermally-Treated Bituminous Coal During Step-by-Step Crushing: Implications for Closed Pore Variations with Temperature

Microstructure evolution in bituminous-coal pyrolysis under in situ and stress-free conditions: a comparative study

Evolution of Broken Coal Permeability Under the Condition of Stress, Temperature, Moisture Content, and Pore Pressure

Evolution law of pulsating seepage and thermal deformation by injecting high‐temperature steam into coal for thermal coalbed methane recovery

Pore-scale modeling of pore structure properties and wettability effect on permeability of low-rank coal

Experimental study on the evolution of pore-fracture structures and mechanism of permeability enhancement in coal under cyclic thermal shock

Change Laws of Pore-Fracture Structure of Coal under High-Temperature Steam Shock

Mechanisms underlying variations in pore structures and permeability in response to thermal treatment and their implications for underground coal utilization

Coupled Effects of Stress, Moisture Content and Gas Pressure on the Permeability Evolution of Coal Samples: A Case Study of the Coking Coal Resourced from Tunlan Coalmine

Microcrack evolution and permeability enhancement due to thermal shocks in coal

On Permeability Evolution of Coal Induced by Temperature, Creep, and Matrix–Fracture Interaction

Regulation of Permeability of Plastic Layer of Coking Coal by Volatiles from Coal Pyrolysis

Gas Permeability Evolution of Coal with Inclusions under Triaxial Compression-Lab Testing and Numerical Simulations

Understanding the Irreversible Evolution of Coal Permeability Under Cyclic Axial Deviatoric Stress