Abstract:Bacterial nanocellulose (BNC) is an exopolysaccharide produced by certain acetic acid bacteria. It has high crystallinity, high mechanical strength, high purity and high water-holding capacity. These properties make it useful in making artificial skin (1), electronic paper, composite reinforcement, development of food and cosmetic applications (2). The cost of fermentation media is believed to contribute significantly to the operational costs, especially if synthetic commercial media are used. Hence, much research on BNC production using low-cost substrates has been done focusing on lowering the production costs (3). Also, to meet the requirement for industrial applications, effective large-scale BNC production systems need to be developed, which involves improving the fermentation conditions and identifying high yield BNCproducing strains (4). However, as with many fermentation systems, while promoting the recycling of low value-added products, the use of complex substrates may in fact represent a bottleneck in the BNC fermentation processes. Some of these substrates present, comparatively to synthetic nutrients, high chemical oxygen demand (COD), total and volatile solids (TS and VS), total nitrogen (TN), antimicrobial components (such as phenols) Consequently, these alternative substrates may place an economic problem either downhill, due to the need for wastewaters treatments and/or, uphill, due to the need of substrates pre-treatment. In this work, the optimization of alternative BNC culture medium (Molasses-Corn Steep Liquor, MOL-CSL), using Response surface methodology – central composite design was used to evaluate the effect of inexpensive and widely available nutrients sources, namely MOL, ethanol (EtOH), CSL and ammonium sulphate on BNC production yield under static culture by komagataeibacter xylinus BPR 2001. The optimized parameters for maximum BNC production were: % (m/v): MOL 5.38, CSL 1.91, ammonium sulphate 0.63, disodium phosphate 0.270, citric acid 0.115 and ethanol 1.38 % (v/v). The maximum BNC production yield were 7.5 ± 0.54 g/L versus 1.79 ± 0.04 g/L for MOL-CSL and synthetic medium (HS-EtOH) culture medium, respectively. The resulting wastewater from each culture medium was characterized regarding COD, TN, TS and VS, leading to the conclusion that the wastewaters generated using MOL-CSL are more heavily charged with organic matter, increasing the final costs of BNC production due to the higher costs associated to wastewater treatment. Anaerobic digestion (AD) was studied for wastewater treatment and biogas production from the wastewaters of the BNC fermentation and purification process. Finally, a preliminary Life Cycle Assessment of BNC production was performed and will be presented. Acknowledgements: This study was supported by the Portuguese Foundation for Science and Technology (FCT) (PhD grant SFRH/BD/89547/2012 attributed to Ana Cristina Rodrigues and under the scope of the strategic funding of UID/BIO/04469 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684) and 4th INTERNATIONAL SYMPOSIUM ON BACTERIAL NANOCELLULOSE 3-4th October, 2019 Almeida Garrett Library Auditorium, Porto-Portugal Multibiorefinery PAC (SAICTPAC/0040/2015) and BioTecNorte operation (NORTE-01-0145-FEDER000004) funded by the European Regional Development Fund under the scope of Norte2020 Programa Operacional Regional do Norte and project no 003435: “BUILD – Bacterial cellulose Leather”, funded by Fundo Europeu de Desenvolvimento Regional (FEDER) through the Programa Operacional do Regional do Norte (NORTE 2020) The authors also acknowledge the financial support of the FCT (ESF) through the grant given to J.V. Oliveira (SFRH/BD/111911/2015).

Optimization of bacterial cellulose production from alcohol lees by intermittent feeding strategy

Overproduction of bacterial cellulose from Acetobacter xylinum BPR2001 using food industries wastes

Newly developed medium and strategy for bacterial cellulose production

Effect of food industry by-products on bacterial cellulose production and its structural properties

Efficient Production of Bacterial Cellulose Using Komagataeibacter sucrofermentans on Sustainable FeedstocksDevelopment

Utilization of marine algae as a carbon source for bacterial cellulose production by Gluconacetobacter xylinus

Preparation and characterization of bacterial cellulose synthesized by kombucha from vinegar residue

Biosynthesis of Antibacterial Bacterial Cellulose In-Situ Using Yellow Wine Wastewater Through Co-Fermentation

Optimization of bacterial cellulose production by Komagataeibacter sucrofermentans in synthetic media and agrifood side streams supplemented with organic acids and vitamins

Enhanced production of bacterial cellulose by using a biofilm reactor and its material property analysis

Bacterial cellulose production through the valorization of waste apple pulp and stale bread

Production of bacterial cellulose from alternative cheap and waste resources: A step for cost reduction with positive environmental aspects

Statistical optimization of bioprocess parameters for enhanced production of bacterial cellulose from K. saccharivorans BC-G1

Insights into Agitated Bacterial Cellulose Production with Microbial Consortia and Agro-Industrial Wastes

Green synthesis and optimization of bacterial cellulose production from food industry by-products by response surface methodolgy

On to the impact of low cost substrates for BNC production

Production of Bacterial Cellulose and Beverage Simultaneously by Multi-Strains-mixed-fermentation

Low-cost bacterial cellulose production from agricultural waste for antibacterial applications

Optimization and physicochemical characterization of bacterial cellulose by Komagataeibacter nataicola and Komagataeibacter maltaceti strains isolated from grape, thorn apple and apple vinegars

Improvement of Bacterial Cellulose Fermentation by Metabolic Perturbation with Mixed Carbon Sources

Sustainable bacterial cellulose production by Achromobacter using mango peel waste