Abstract:Rationale: Molecular imaging of samples using mass spectrometric techniques, such as matrix-assisted laser desorption ionization or desorption electrospray ionization, requires the sample surface to be even/flat and sliced into thin sections (c. 10 μm). Furthermore, sample preparation steps can alter the analyte composition of the sample. The liquid microjunction-surface sampling probe (LMJ-SSP) is a robust sampling interface that enables surface profiling with minimal sample preparation. In conjunction with a conductance feedback system, the LMJ-SSP can be used to automatically sample uneven specimens. Methods: A sampling stage was built with a modified 3D printer where the LMJ-SSP is attached to the printing head. This setup can scan across flat and even surfaces in a predefined pattern ("static sampling mode"). Uneven samples are automatically probed in "conductance sampling mode" where an electric potential is applied and measured at the probe. When the probe contacts the electrically grounded sample, the potential at the probe drops, which is used as a feedback signal to determine the optimal position of the probe for sampling each location. Results: The applicability of the probe/sensing system was demonstrated by first examining the strawberry tissue using the "static sampling mode." Second, porcine tissue samples were profiled using the "conductance sampling mode." With minimal sample preparation, an area of 11 × 15 mm was profiled in less than 2 h. From the obtained results, adipose areas could be distinguished from non-adipose parts. The versatility of the approach was further demonstrated by directly sampling the bacteria colonies on agar and resected human kidney (intratumoral hemorrhage) specimens with thicknesses ranging from 1 to 4 mm. Conclusion: The LMJ-SSP in conjunction with a conductive feedback system is a powerful tool that allows for fast, reproducible, and automated assessment of uneven surfaces with minimal sample preparation. This setup could be used for perioperative assessment of tissue samples, food screening, and natural product discovery, among others.

A 3D-printed transepidermal microprojection array for human skin microbiome sampling

Diagnostics of skin features through 3D skin mapping based on electro-controlled deposition of conducting polymers onto metal-sebum modified surfaces and their possible applications in skin treatment

PEDOT coated microneedles towards electrochemically assisted skin sampling.

Identifying individual-specific microbial DNA fingerprints from skin microbiomes

3D printer platform and conductance feedback loop for automated imaging of uneven surfaces by liquid microjunction-surface sampling probe mass spectrometry

Molecular cartography of the human skin surface in 3D

A deployable film method to enable replicable sampling of low-abundance environmental microbiomes

Minimally invasive skin sampling and transcriptome analysis using microneedles for skin type biomarker research

Skin metatranscriptomics reveals landscape of variation in microbial activity and gene expression across the human body

Isolation and characterization of diverse microbial representatives from the human skin microbiome

SkinProfiler: low-cost 3D scanner for skin health monitoring with mobile devices

Enhanced extraction of skin interstitial fluid using a 3D printed device enabling tilted microneedle penetration

Microneedle Array Electrodes Fabricated With 3D Printing Technology for High-Quality Electrophysiological Acquisition

Microneedle Arrays for Sampling and Sensing Skin Interstitial Fluid

Streamlined Intravital Imaging Approach for Long-Term Monitoring of Epithelial Tissue Dynamics on an Inverted Confocal Microscope

A synthetic skin microbial community (SkinCom) enables reproducible investigations of the human skin microbiome

Longitudinal Mapping of Personal Biotic and Abiotic Exposomes and Transcriptome in Underwater Confined Space Using Wearable Passive Samplers

Inverse Opal Microneedles Arrays for Fluorescence Enhanced Screening Skin Interstitial Fluid Biomarkers

3D reconstruction of skin and spatial mapping of immune cell density, vascular distance and effects of sun exposure and aging

Monitoring of Pigmented Skin Lesions Using 3D Whole Body Imaging