Abstract:This paper assesses the dynamic performance of permanent magnet synchronous generator based wind turbine (WT) regarding the blade in‐plane fatigue loads once the WT is controlled in the power control mode. Then, an active mitigation approach is proposed to mitigate the blade in‐plane oscillations. The proposed method enhances the damping ratio of the blade in‐plane oscillatory modes by adding a supplementary term into the power control loop that is proportional to the speed difference between the blade and generator. This paper assesses the dynamic performance of permanent magnet synchronous generator‐based wind turbine (WT) regarding the blade in‐plane fatigue loads once the WT is controlled in power control mode. Blade in‐plane oscillations, associated with the poorly blade in‐plane modes, can be excited by turbulent winds or grid disturbances that may lead to damage of the blades and reduce the drive‐train reliability. To overcome this drawback, at first, a model with three degrees of freedom is extracted for the drive‐train system, and then, an active mitigation approach is proposed to mitigate the blade in‐plane oscillations. The proposed method can effectively suppress the blade in‐plane vibrations by adding a supplementary term into the power control loop that is proportional to the speed difference between the blade and generator. The speed difference between the blade and generator is obtained by estimation of the blade‐hub and hub‐generator shaft torsional torques. Next, the performance of the proposed active mitigation approach is examined by the modal and frequency response analyses and time‐domain simulations. Finally, it is shown that the proposed approach has superior performance over the conventional approaches based on the simplified drive‐train model and crossing the measured generator speed through a band‐pass filter.

Active blade pitch control and stabilization of a wind turbine driven PMSG for power output regulation

Power Fluctuations Smoothing Control Based on PCH Model of D-PMSG Wind Power System

An Integrated Control Strategy for D-PMSG Wind Power Generation Systems

L1 Adaptive Pitch Angle Controller of Wind Energy Conversion Systems.

Improved load-adaptive control strategy for PMSG based stand-alone wind energy generation system

The Hydraulic Pitch-Controlled Technology Of Wind Turbine

Design, Modeling and Implementation of a Novel Pitch Angle Control System for Wind Turbine

Pitch Angle Control for Wind Turbine Based on Constant Pressure Network and Hydraulic Motor with Variable Displacement

Voltage/pitch control for maximization and regulation of active/reactive powers in wind turbines with uncertainties

A novel control strategy of wind turbine MPPT implementation for direct-drive PMSG wind generation imitation platform

Hybrid Intelligent Feedforward-Feedback Pitch Control for VSWT with Predicted Wind Speed

STUDY ON ELECTROHYDRAULIC PROPOTION AND PITCH-CONTROLLED TECHNOLOGY OF WIND TURBINE

Power Oscillation Analysis of PMSG Wind Power Generation System Considering Power Control Nonlinearity

An efficient power control strategy for active mitigation of blade in‐plane fatigue loading in PMSG‐based wind turbines

An MPC based active and reactive power coordinated control strategy of PMSG wind turbines to enhance the support capability

Adaptive Dual-layer Sliding Mode Control for Wind Turbines with Estimated Wind Speed

Effective Wind Speed Estimation and Prediction Based Feedforward Feedback Pitch Control for Wind Turbines.

A control algorithm to increase the efficient operation of wind energy conversion systems under extreme wind conditions

Power Stable Regulation of Direct-Drive Permanent Magnet Wind Power System Using Pitch and Torque Control

Power maximization and regulation of the super-large wind turbine system using generalized predictive approach-based torque and pitch control

Enhanced Performance in PMSG-Based Wind Turbine Systems: Experimental Validation of Adaptive Backstepping Control Design