Abstract:The growing use of renewable energy accelerates research on energy storage systems (ESSs) to accommodate the distributed nature of power sources and fluctuation in supply and demand. The commercially adopted system for ESSs is lithium-ion batteries (LIBs), which are actively studied for recent years. However, the use of rare resources such as Li, Ni and Co, as well as volatile and flammable organic electrolytes, cause environmental problems and fire hazards. Therefore, new type of environmentally friendly and safe ESSs are needed to meet the future demand. In this regard, the aqueous zinc-ion hybrid supercapacitors (ZHSCs) are assumed as the remarkable candidate for ESSs. ZHSCs consist of battery-type Zn metal anode and capacitor-type carbon cathode with different ion storage mechanisms. Because they have unique design of electrodes, they can combine the advantages of existing batteries and supercapacitors such as high energy/power density and long cycle lifespans. In addition, the use of Zn metal has lots of benefits compare to Li-based electrodes, for example, Zn has low standard potential (-0.76 V vs. standard hydrogen electrode), high theoretical gravimetric/volumetric capacity (820 mAh g -1 and 5845 Ah/L) and relatively low cost. In ZHSCs, they store energy through an electric double-layer capacitive mechanism in which Zn 2+ ions or anions are adsorbed on the surface of carbon cathode while Zn 2+ ions are inserted/extracted in Zn metal anode, or a pseudo-capacitive mechanism generated by redox reaction with functional groups on the carbon surface. To achieve higher electrochemical performance of ZHSCs, previously reported research focused on modifying carbon cathode with highly porous structure or introducing heteroatoms. The porous carbon with abundant micropores (<2nm) and mesopores (2-50nm) can be used to provide high surface area for ions to adsorb/desorb and serve as channels for electrolytes and ions to diffuse rapidly. Besides, modifying surface of carbon cathode by doping heteroatoms (N, O, S, B, P) can improve wettability and conductivity of electrode and produce additional capacitance from redox reactions. However, although many researchers have studied to reform carbon cathode, they rarely study the effect of carbon’s morphology on its electrochemical performance. In the electrode level, irregularly shaped carbon could result in poor volumetric capacitance and high resistance properties caused by low mass loading and poor particle contact. The proposed morphology to solve these issues is spherical shape. As the spherical particles have no edges, they hardly damaged and have good powder fluidity between particles, leading to higher tap density or electrode density. They can also provide short diffusion path for ions to move compared to irregularly shaped particles, since the thin electrode can be made using the same amount of active material. This can enhance overall electrochemical performance of ZHSCs by lowering internal resistance and improving high rate capability of electrodes. In this respect, we suggest “spherical and uniform shape” carbon cathode along with the pore modification and heteroatom doping to compare the factors affecting electrochemical performance in ZHSCs. Thus, we prepared three different types of mesoporous carbons, which are spherical mesoporous carbon foam (S-MCF), N-doped spherical mesocellular carbon foam (S-MCF-N) and irregular shaped mesocellular carbon foam (MSUF-C). The improved electrode density of ZHSCs are achieved in spherically-controlled carbons (S-MCF and S-MCF-N) with 2.9 times higher tap density than irregularly shaped carbon (MSUF-C). Besides, the introduction of nitrogen to carbon (S-MCF-N) affords abundant active sites on the surface of carbon, increasing electrical conductivity and inducing additional pseudo-capacitance. Figure 1

Engineering Pore Nanostructure of Carbon Cathodes for Zinc Ion Hybrid Supercapacitors

Porous Structure‐Electrochemical Performance Relationship of Carbonaceous Electrode‐Based Zinc Ion Capacitors

A Hollow-Shaped ZIF-8-N-Doped Porous Carbon Fiber for High-Performance Zn-Ion Hybrid Supercapacitors

Hierarchical Porous Carbon Guided by Constructing Organic-Inorganic Interpenetrating Polymer Networks to Facilitate Performance of Zinc Hybrid Supercapacitors

C3N4 Template-Based N-Doped Porous Carbon Cathode for Zinc-Ion Hybrid Capacitors

Boosting Spatial Charge Storage in Ion‐Compatible Pores of Carbon Superstructures for Advanced Zinc‐Ion Capacitors

Tailor-made Overstable 3D Carbon Superstructures Towards Efficient Zinc-Ion Storage

Unraveling the role of solvent-precursor interaction in fabricating heteroatomic carbon cathode for high-energy-density Zn-ion storage

Nanoconfined carbonization enabling high-density porous carbon for jointly superior gravimetric and volumetric zinc-ion storage

Hydrogen-bond-mediated Micelle Aggregating Self-Assembly Towards Carbon Nanofiber Networks for High-Energy and Long-Life Zinc Ion Capacitors

Supermolecule-mediated defect engineering of porous carbons for zinc-ion hybrid capacitors

Study on Morphology Control and N-Doping of Porous Carbon Cathode for Zinc-Ion Hybrid Supercapacitor

N, O Co-Doped Hierarchically Porous Carbon Derived from Pitch/g-C3n4 Composite for High-Performance Zinc-Ion Hybrid Supercapacitors

Boosting the Capacitance of Aqueous Zinc-Ion Hybrid Capacitors by Engineering Hierarchical Porous Carbon Architecture

Solvent-guided nanoarchitecturing of heterodiatomic carbon superstructures for high-performance zinc-ion hybrid capacitors

Engineering C O Groups in 3D Hollow Porous Carbon for Boosting Zn-ion Hybrid Supercapacitors

Controllable synthesis of electric double-layer capacitance and pseudocapacitance coupled porous carbon cathode material for zinc-ion hybrid capacitors

Porous Polypyrrole-Derived Carbon Nanotubes As a Cathode Material for Zinc-Ion Hybrid Supercapacitors

Controllable Construction of 3D-Honeycomb-like porous carbon network as High-Performance Cathodes for Promoting Zn-Ion Storage Capability

Hybrid Particle Size Template Method for Controllable Synthesis of Nitrogen‐doped Multilevel Porous Carbon as High‐rate Zn‐ion Hybrid Supercapacitor Cathode Materials

Controllable construction of a 3D-honeycomb-like porous carbon network as a high-performance cathode for promoting Zn-ion storage capability