Abstract:Journal of Reinforced Plastics and Composites, Ahead of Print. Polymer-based composites (GFRP) are increasingly used in the mechanical industry due to their cost-profitability, durability, and good mechanical properties. In the present study, a metal carbide tool was employed to manufacture polyamide (PA66-GF30%) specimen in a dry environment. The impact of variations in cutting process parameters on the responses studied is investigated using two experimental techniques. The first is the OFAT approach. For the second technique (multifactorial), the effects of input parameters on technological parameters (Ra, Fz, MRR, and Pc) are quantified aided by the ANOVA method using an experimental design based on Taguchi's L9 (3 × 3) orthogonal matrix. Based on the RSM methodology, the results were processed statistically to propose prediction models for the different outputs. In addition, a single-objective optimization study of Taguchi's and a multi-objective optimization of the operating conditions using the classification method based on CoCoSo as well as the DF Approach according to two desired objectives were carried out. The first objective of this study concerns the minimization of (Ra, Fz, and Pc), and the second one considers the minimization of (Ra, Fz, and Pc) at the same time as maximizing (MRR). Finally, the surface roughness criteria (Ra and Sa) of PA66-GF30% were evaluated to study the effect of the feed (f) on the machined surface topography. The findings are of capital importance in that they provide the required and correct information about the working conditions of composite polymers. According to "OFAT" results, feed (f) is the predominant factor influencing roughness (Ra). Temperature in the cutting zone rises with increasing cutting conditions (Vc, f and ap). Variations in cutting conditions affect the morphology of the chip produced. The roughness criteria (Ra and Sa) results clearly show that the topography of the PA66-GF30% surface changes as (f) changes. Also, optimization of all performance parameters simultaneously indicates that the DFA offers the best combination of parameters: Vc = 187.50 m × min−1, f = 0.096 mm × rev−1, and ap = 0.866 mm, leading to the minimization of (Ra) and maximization of (MRR), with respective values of 1.24 μm and 15.614 cm3 × min−1. Furthermore, the CoCoSo method favors the minimization of (Fz and Pc) with values of 20.18 N and 69.285 W, respectively.

Application of analytical hierarchy process for the determination of green polymeric-based composite manufacturing process

Wood Flour-Reinforced Green Composites: Parameter Optimization via Multi-criteria Decision-Making Methods

Multi-Attribute Decision Making: Parametric Optimization and Modeling of the FDM Manufacturing Process Using PLA/Wood Biocomposites

Integrated product-process design: Material and manufacturing process selection for additive manufacturing using multi-criteria decision making

Assessment of consolidative multi-criteria decision making (C-MCDM) algorithms for optimal mapping of polymer materials in additive manufacturing: A case study of orthotic application

Process Intensification Of Polymerization Processes With Embedded Molecular Weight Distributions Models: An Advanced Optimization Approach

Modeling, multi-response optimization, and performance reliability of green metal composites produced from municipal wastes

Selection of sustainable material for the manufacturing of complex automotive products using a new hybrid Goal Programming Model for Best Worst Method–Proximity Indexed Value method

A review of environmental friendly green composites: production methods, current progresses, and challenges

Critical Factors on Manufacturing Processes of Natural Fibre Composites

Polymeric Materials Selection for Flexible Pulsating Heat Pipe Manufacturing Using a Comparative Hybrid MCDM Approach

Investigation on machining of GFRP through ANOVA, DFA, and CoCoSo method combined with Taguchi approach

An integrated multi-criteria decision-making framework for the selection of sustainable biodegradable polymer for food packaging applications

Environmental evaluation of polyhydroxyalkanoates from animal slaughtering waste using Material Input Per Service Unit

A hybrid multi-stage decision-making method with probabilistic interval-valued hesitant fuzzy set for 3D printed composite material selection

Abrasive water jet machining for a high-quality green composite: the soft computing strategy for modeling and optimization

Advanced synthetic and biobased composite materials in sustainable applications: a comprehensive review

Modeling and optimization of the manufacturing parameters of a hybrid fiber reinforced polymer composite PxGyEz

An integrated CRITIC-COPRAS approach for multi-response optimization on AWJM of hybrid filler–reinforced polymer composite and its surface integrity

Life cycle analysis for green composites: A review of literature including considerations for local and global agricultural use

Manufacturing of Sustainable Composite Materials: The Challenge of Flax Fiber and Polypropylene