Abstract:Constructing a rational electrode structure for supercapacitors is critical to accelerate the electrochemical kinetics process and thus promote the capacitance. Focusing on the flexible supercapacitor electrode, we synthesized a three-dimensional (3D) porous polypyrrole (PPy) film using a modified vapor phase polymerization method with the use of a porous template (CaCO3). The porous design provided the PPy film with an improved surface area and pore volume. The porous PPy film electrode was studied as a binder-free electrode for supercapacitors. It was found that the abundant interpenetrated pores created by the CaCO3 templates within the 3D framework are beneficial to overcoming the diffusion-controlled limit in the overall electrochemical process. It was revealed by electrochemical investigation that a more pseudocapacitive contribution than diffusion-controlled process contribution was observed in the total charge in the redox reaction. The galvanostatic charge/discharge (GCD) measurements showed that the optimized 3D porous PPy film electrode delivered a high capacitance of 313.6 F g–1 and an areal capacitance of 98.0 mF cm–2 at 1.0 A g–1 in a three-electrode configuration, which is nearly three times that of the dense counterpart electrode synthesized in the absence of the CaCO3 template. A specific capacitance of 62.5 F g–1 at 0.5 A g–1 and 31.1 F g–1 at 10 A g–1 was obtained in a symmetric capacitor device. In addition, the porous structure provided the PPy film with the attractive capability of accommodating the volume change during the doping/dedoping process. This is essential for the PPy film to maintain a long cycling life in a practical operation for a supercapacitor. It turned out that a high capacitance retention up to 81.3% after 10,000 GCD cycles was obtained for the symmetric supercapacitor device with the 3D porous PPy electrode (57.1% capacitive retention was observed for the dense PPy electrode). The strategy and the insight analysis are expected to provide valuable guidance for the design and the synthesis of flexible and wearable film electrodes with high performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03553?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03553</a>.SEM images of CaCO3 particles; digital images of the PPy-1.5 and the dense PPy films; XRD patterns of the PPy-1.5 and the dense PPy films; N2 adsorption/desorption isotherm linear plots, BJH (desorption) pore volume and pore size curves of the PPy-1.5 and the dense PPy films; linear fittings of the peak currents as a function of the scan rates in their corresponding CV curves for various electrodes; b slopes obtained from fitted results; electrochemical measurements of the dense PPy electrode; CV curves of the dense PPy symmetric device; rate performance comparison of the PPy-1.5 and the dense PPy film electrodes; equivalent circuit for the EIS fitting; fitted parameters from Nyquist; and SEM images of the PPy-1.5 film and the dense PPy film disassembled from the devices after the cycling test (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03553/suppl_file/am1c03553_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Incorporating Conducting Polypyrrole into a Polyimide COF for Carbon‐Free Ultra‐High Energy Supercapacitor

Inlaying ZIF-derived Co3S4 Hollow Nanocages on Intertwined Polypyrrole Tubes Conductive Networks for High-Performance Supercapacitors

Covalent organic framework-derived microporous carbon nanoparticles coated with conducting polypyrrole as an electrochemical capacitor

Improving the Pore-Ion Size Compatibility Between Poly(ionic Liquid)-Derived Carbons and High-Voltage Electrolytes for High Energy-Power Supercapacitors

Enhanced Capacitance Performance by Coupling 2D Conductive Metal–Organic Frameworks and Conducting Polymers for Hybrid Supercapacitors

Covalent Organic Framework Derived Oxygen/Sulfur‐Doped Porous Carbon for Robust High‐Capacitance Symmetric Supercapacitors

Electrochemical synthesis of tunable polypyrrole‐based composites on carbon fabric for wide potential window aqueous supercapacitor

In-situ growing of polypyrrole to cobalt–aluminum layered double hydroxide for high cyclic stability of supercapacitors

A 2-D microporous covalent organic framework for high-performance supercapacitor electrode

Flux Synthesis of Robust Polyimide Covalent Organic Frameworks with High‐Density Redox Sites for Efficient Proton Batteries

Conductive MOF/Polymer Composite Electrode with Enhanced Capacitance for Supercapacitors

Superior Charge Storage and Power Density of a Conducting Polymer-Modified Covalent Organic Framework

Structural Tuning of a Flexible and Porous Polypyrrole Film by a Template-Assisted Method for Enhanced Capacitance for Supercapacitor Applications

CoP Quantum Dots Embedded in Carbon Polyhedra through Co─P─C Bonding Enabling High‐Energy Lithium‐Ion Capacitors

Boosting the Capacitance of Covalent Organic Framework Supercapacitors by Hydroquinone Redox Electrolyte Addition

A Free-Standing Polymer Polypyrrole/Cellulose Composite Film via Spatial-Confined Interfacial Electrodeposition for Flexible Supercapacitors

Dithiophenedione-Based Covalent Organic Frameworks for Supercapacitive Energy Storage

A Nanofibrous Polypyrrole Membrane with an Ultrahigh Areal Specific Capacitance and Improved Energy and Power Densities

Highly Flexible, Freestanding Supercapacitor Electrode with Enhanced Performance Obtained by Hybridizing Polypyrrole Chains with MXene

High-Performance Polyimide Covalent Organic Frameworks for Lithium-Ion Batteries: Exceptional Stability and Capacity Retention at High Current Densities

High pseudocapacitance electrode enabled by heterovalent doping and surface coating for rapid charge storage