Abstract:Abstract. Mobile and economically priced gas monitoring and warning systems will become increasingly important for civil security, such as in fire brigade operations in undefined hazardous environments (Daum et al., 2006). Normally, photoionization detectors (PIDs) are used for the detection of gases. Hereby, the principle is based upon the ionization of the measured gas by photons, which are generated by a high-energetic gas discharge lamp with energy of 10–11 eV. Besides the detrimental unspecific gas detection because of the ionization of all gases with ionization potential (IP) below the provided photon energy, sensors also have a short lifetime combined with a high cost (http://www.intlsensor.com/pdf/photoionization.pdf). This can be remedied by the concept of an electronic supported photoionization detector (ePID; Zimmer et al., 2012) consisting of a durable UV-LED with an above-positioned electron accelerator chip manufactured on a glass substrate by planar technology. Photoelectrons are extracted by UV illumination out of the bottom electrode and will be accelerated to an energy matching the ionization potential of the gas by a downstream acceleration grid. Thereby, the stable honeycomb-structured grid acts as a porous separator between the evacuated electron acceleration path due to nm scaling and the ionization area of the detector. To enhance the emitting area yielding a higher photoelectron current, the grid structure almost levitates, realized by the use of compatible planar technological processes such as reactive ion etching (RIE) and isotropic wet etching of sacrificial layers, which will be explained in detail in this paper. Furthermore, the tunability of the grid's acceleration voltage would enable a substance-specific determination of the gas composition, where the ionization of the analytes is clearly performed by photoelectrons instead of photons.

Towards the Breakdown Mechanisms in Micro-Pattern Gas Detectors (a Review)

Research on discharges in micropattern and small gap gaseous detectors

Electrical breakdown from macro to micro/nano scales: a tutorial and a review of the state of the art

Signal propagation and spark mitigation in resistive strips read-outs

Preliminary Research on Breakdown Mechanism of Gas Switch

Experimental Study on Breakdown Characteristics of Microwave Gas Discharge Tubes

Fundamentals of Gas Micropattern Detectors

Investigation of the conditions for gas breakdown in a porous dielectric

Perspectives of Micro-Pattern Gaseous Detector Technologies for Future Physics Projects

Review of electron emission and electrical breakdown in nanogaps

Impact of the gas choice and the geometry on the breakdown limits in Micromegas detectors

Static breakdown threshold modeling of quasi-uniform gas gaps with a focus on the PDIV of contacting enameled wire pairs

Advances in Micro-Pattern Gaseous Detectors and their Applications

Development of Micro Pattern Structure Gas Detectors

Micro-structured electron accelerator for the mobile gas ionization sensor technology

Discharge mitigation methods in MPGD-based detectors

Breakdown, Discharge Modes, and Gaseous Recovery of Atmospheric Air with Repetitive 10 Ns Pulses

A numerical study on the discharges in Micromegas

Development and preliminary tests of resistive microdot and microstrip detectors

Motion and Breakdown Related to Microparticles in Vacuum Gap

Numerical Modeling of Different Streamer Breakdown Modes of Gas Switch under the External Circuit