Abstract:An overview is presented of research on the interactions between micro-organisms and mineral building materials (concrete and natural stone), performed at the Magnel laboratory for concrete research of Ghent University, in collaboration with other research groups. A first research topic is the deterioration process taking place in concrete sewer systems and manure storage facilities, called biogenic sulphuric acid (BSA) corrosion. This process can be mimicked by pure chemical or microbial degradation tests. The problem of chemical tests with sulfuric acid is that they do not take into account a possible biocidal activity of the concrete. Nevertheless, microbial tests confirmed that it is preferable to use a material with a high neutralisation capacity to limit bioteterioration. Therefore, a model for biogenic sulfuric acid attack should include the concrete alkalinity as a parameter, next to other durability related parameters such as porosity. A second topic is the application of bacteria for bioconsolidation and self-healing. Bacterially induced carbonate precipitation was investigated as a surface treatment for cementitious materials and limestone. The biodeposition treatment resulted in an increased resistance of concrete towards water absorption, carbonation, chloride penetration and freezing and thawing. In porous limestone, consolidation by biodeposition could be achieved at depths up to 30 mm and more. The overall strength increase in this zone amounted to more than 300%. With regard to microbial selfhealing, bacteria were immobilized on diatomaceous earth or inside microcapsules, before introduction into the concrete mixture. Incorporation of diatomaceous earth with Bacillus sphaericus in mortar specimens allowed selfhealing of 0.15 mm - 0.17 mm cracks by calcium carbonate precipitation, 40 days after crack formation. Introduction of bacterial microcapsules enabled self-healing of cracks having a width of almost 1 mm in three weeks time. Another application of micro-organisms on concrete is for the creation of green concrete walls. For these walls the concrete is purposefully designed to obtain a specific microstructure and bioreceptivity as substrate for biological growth. Concrete with magnesium phosphate cement and carbonated Portland cement concrete were applied to obtain sufficiently low pH values. Other important factors that determine bioreceptivity such as concrete porosity and surface roughness were also optimized for biological growth.

Biomineralized Materials for Sustainable and Durable Construction

Bio-Cementation in Construction Materials: A Review

A review on the potential challenges in the application of biocementation in cement-based materials, possible solutions and way forward

Biocementation promoted by bacteria in concrete recovery and soil stabilization

Sustainable construction: Toward growing biocement with synthetic biology

Biocement Fabrication and Design Application for a Sustainable Urban Area

Advanced bacteria-based biomaterials for environmental applications

Bio-inspired synthesis of nanocrystalline calcite demonstrating significant improvement in mechanical properties of concrete: a construction-nanobiotechnology approach

Microbial Interactions with Mineral Building Materials

A systematic review of waste materials in cement-based composites for construction applications

Current trends and biotechnology infused cleaner production of biomaterials for the construction industry: A critical review

Microbial Concrete-a Sustainable Solution for Concrete Construction

Enhancing Concrete Resilience and Sustainability Through Fly Ash-Assisted Microbial Biomineralization for Self-Healing: from Waste to Greening Construction Materials

Application of Microorganisms in Concrete: a Promising Sustainable Strategy to Improve Concrete Durability

Advancements in 3D printing of cementitious materials: A review of mineral additives, properties, and systematic developments

Smart materials and technologies for sustainable concrete construction

Construction biotechnology: improving mortar properties through calcium carbonate precipitation using a novel strain of the bacterium Neisseria perflava

3D bioprinting of mineralizing cyanobacteria as novel approach for the fabrication of living building materials

Self-Healing Concrete: Concepts, Energy Saving and Sustainability

MICROBIAL MODIFIED GEOMATERIALS:A METHODOLOGY REVIEW

Biomineralization of calcium carbonates and their engineered applications: a review