Abstract:The automated tape placement and the automated fiber placement (AFP) machines provide a safer working environment and reduce the labor intensity of workers than the traditional manual fiber placement does. Thus, the production accuracy, repeatability and efficiency of composite manufacturing are significantly improved. However, the current AFP systems can only produce the composite components with large open surface or simple revolution parts, which cannot meet the growing interest in small complex or closed structures from industry. In this research, by employing a 1-degree of freedom (DoF) rotational stage, a 6-RSS parallel robot, and a 6-DoF serial robot, the dexterity of the AFP system can be significantly improved for manufacturing complex composite parts. The rotational stage mounted on the parallel robot is utilized to hold the mandrel and the serial robot carries the placement head to mimic two human hands that have enough dexterity to lay the fiber to the mandrel with complex contour. Although the CCM system increases the flexibility of composite manufacturing, it is quite time-consuming or even impossible to generate the feasible off-line path, which ensures uniform lay-up of subsequent fibers considering the constraints like singularities, collisions between the fiber placement head and mandrel, smooth fiber direction change and keeping the fiber placement head along the norm of the part's surface, etc. Moreover, due to the existing positioning error of the robots, the on-line path correction is needed. Therefore, the on-line pose correction algorithm is proposed to correct the paths of both parallel and serial robots, and to keep the relative path between the two robots unchanged through the visual feedback when the constraint or singularity problems in the off-line path planning occur. The experimental results demonstrate the designed CCM system can fulfill the movement needed for manufacturing a composite structure with Y-shape.

3-Dimensional construction of the modularized rail structure in various posture conditions

Cooperative Modular Manipulation with Numerous Cable-Driven Robots for Assistive Construction and Gap Crossing

Compliant Human-Robot Object Transfer Based on Modular 3-Axis Force Sensor for Collaborative Manufacturing.

Three-dimensional Auxetic Structure Design Methods Based on Bulking-Induced Deformation and the Application in Soft Crawling Robot

Dual-Arm Construction Robot for Automatic Fixation of Structural Parts to Concrete Surfaces in Narrow Environments

Kinematic Analysis and Gait Planning of a Three-branch Relative Robot for On-orbit Assembly

Development of a Three-Mobile-Robot System for Cooperative Transportation

In Situ Reconfiguration of Assembling Pattern for Modular Continuum Robots

Rail DRAGON: Long-Reach Bendable Modularized Rail Structure for Constant Observation Inside PCV

Real-time simulation of construction workers using combined human body and hand tracking for robotic construction worker system

Arm-Mounted Assistive Robot for Measuring Contact Force and Evaluating Wearer Safety

A Biped Robot With 3t Manipulation Ability

Robotic Mounted Rail Arm System for Implementing Effective Workplace Safety for Migrant Workers

Autonomous Assembly Method of 3-Arm Robot to Fix the Multipin and Hole Load Plate on a Space Station

Structure design of a reconfigurable modular robot

Task-Driven Computational Framework for Simultaneously Optimizing Design and Mounted Pose of Modular Reconfigurable Manipulators

Operation of the Collaborative Composite Manufacturing (CCM) System

A Robotic Wearable Exoskeleton for Construction Worker’s Safety and Health

Dynamics modelling and path optimization for the on-orbit assembly of large flexible structures using a multi-arm robot

Whole-Body Control of Humanoid Robot in 3D Multi-Contact under Contact Wrench Constraints Including Joint Load Reduction with Self-Collision and Internal Wrench Distribution

A nine-degree-of-freedom modular redundant robotic manipulator: Development and experimentation