Abstract:Because of the anisotropy and non-uniformity, the grinding surface quality of Cf/SiC composites is difficult to be accurately predicted. To better predict the surface quality of 2.5D-Cf/SiC composites, the BP neural network was optimized by genetic algorithm (GA), and the surface roughness prediction model of fiber orientation, ultrasonic amplitude, and machining parameters was established. The empirical formula prediction model of surface roughness was established by the method of multiple linear regression analysis. The results show that the prediction accuracy of GA optimized BP neural network is the best, followed by the empirical formula, and the prediction effect of the BP neural network is the worst. The average absolute percentage error of these three models is 10.045 %, 16.912 % and 26.6245 % respectively. The kinematic models of conventional and two-dimensional ultrasonic-assisted grinding of single particles were established respectively. Based on the kinematic model, the reasons for the reduction of surface roughness by 2D ultrasonic-assisted grinding are explained. According to the orthogonal test results, the surface roughness decreases the most when v(s) is 0.66 m/s, v(w) is 100 mm/min, a(p) is 150 mu m along the fiber orientation of 0 degrees, and the maximum percentage of reduction is 53.18 %. Increasing the linear speed, reducing the feed speed, reducing the grinding depth, and applying ultrasound can reduce the extrusion pressure along the axis of 0 degrees fiber, and then reduce the length and depth of cracks and thus reduce the surface defects. The axial shear force of the 90 degrees oriented abrasive particles on the fiber is reduced, thus reducing the surface damage caused by torsional deformation. Reduce 3D surface profile and improve surface quality. The maximum percentage reduction of each parameter index is as follows: root mean square height decreased by 28.8 %, skew decreased by 88.61 %, kurtosis decreased by 48.97 %, maximum crest height decreased by 48.55 %, maximum sag height decreased by 40.09 %, maximum height decreased by 43.93 %, and arithmetic mean height decreased by 26.06 %.

Sintered silicon carbide grinding surface roughness prediction based on deep learning and neural network

An Intelligent Prediction of Surface Roughness on Precision Grinding

In-process measurement of grinding workpiece surface quality based on neural network

Intelligent Prediction for Surface Roughness of Cnc Surface Grinding Machine Tool Based on Bayesian Network

Investigation on Surface Morphology Model of Si3N4 Ceramics for Rotary Ultrasonic Grinding Machining Based on the Neural Network

Prediction of surface roughness based on fused features and ISSA-DBN in milling of die steel P20

First Steps through Intelligent Grinding Using Machine Learning via Integrated Acoustic Emission Sensors

Grinding Surface Roughness Prediction Model Based on RBF Neural Network

Surface Roughness Prediction Model and Surface Topography Analysis of 2.5D-Cf/sic in Two-Dimensional Ultrasonic Assisted Grinding Based on GA-BP Neural Network

Acoustic Emission Intelligent Prediction of Grinding Surface Roughness Based on BP Neural Network

Grinding Granularity Prediction Based on Improved Particle Swarm Optimization and Gray RBF Neural Network Model

Grinding surface roughness prediction for silicon nitride ceramics: A dynamic grinding force and frequency domain approach

Evaluation and ANN-Based Prediction on Functional Parameters of Surface Roughness in Precision Grinding of Cast Iron

Surface Roughness Prediction of Titanium Alloy during Abrasive Belt Grinding Based on an Improved Radial Basis Function (RBF) Neural Network

Modeling and Prediction of Surface Roughness in Belt Polishing Based on Artificial Neural Network

Prediction and Control of Surface Roughness for the Milling of Al/SiC Metal Matrix Composites Based on Neural Networks

Roughness Prediction and Performance Analysis of Data-Driven Superalloy Belt Grinding

Prediction of Surface Quality for Silicon Carbide Wheel Grinding of Silicon Nitride

Intelligent Prediction of PSZ Ceramic Grinding Surface Roughness Based on Correlation Analysis and CNN-BiLSTM Neural Network

Surface Roughness Prediction in Robotic Belt Grinding Based on the Undeformed Chip Thickness Model and GRNN Method

Modelling and Optimization of Surface Roughness in Chemical Mechanical Polishing Based on DNN-GA