Abstract:Results from the numerical simulation of the two-dimensional incompressible unsteady Navier–Stokes equations for streaming flow past a rotating circular cylinder are presented in this study. The numerical solution of the equations of motion is conducted with a commercial computational fluid dynamics package which discretizes the equations applying the control volume method. The numerical set-up is validated by comparing results for a Reynolds number based on the free stream of $\hbox{\it Re}$ = 200 and dimensionless peripheral speed of $\tilde{q}$ = 3, 4 and 5 with results from the literature. After the validation stage, various pairs of $\hbox{\it Re}$ and $\tilde{q}$ are specified in order to carry out the numerical experiments. These values are $\hbox{\it Re}$ = 200 with $\tilde{q}$ = 4 and 5; $\hbox{\it Re}$ = 400 with $\tilde{q}$ = 4, 5 and 6, and $\hbox{\it Re}$ = 1000 with $\tilde{q}$ = 3. In all these cases, gentle convergence to fully developed steady state is reached. From the numerical vorticity distribution, the position of the outer edge of the vortical region is determined as a function of the angular coordinate. This position is found by means of a reasonable criterion set to define the outmost curve around the cylinder where the vorticity magnitude reaches a certain cut-off value. By considering the average value of this profile, a uniform vortical region thickness is specified for every pair of $\hbox{\it Re}$ and $\tilde{q}$. Next, the theoretical approach of Wang & Joseph (2006a; see the companion paper) and the numerical results are used to determine two different values of the effective vortical region thickness for every pair of $\hbox{\it Re}$ and $\tilde{q}$. One effective thickness $\delta_D/a$ is obtained from the match between the additional drag on the outer edge of the vortical region according to the viscous correction of viscous potential flow (VCVPF) and the corresponding numerical profile while the other thickness $\delta_L/a$ is determined from the match between the pressure lift on the cylinder obtained from Wang & Joseph (2006a)'s simple modification of the boundary-layer analysis due to Glauert (Proc. R. Soc. Lond. A, vol. 242, 1957, p. 108) and the numerical value of the pressure lift coefficient. The values of $\delta_D/a$ and $\delta_L/a$ are used in the computation of various parameters associated with the flow, namely, the torque on the rotating cylinder, the circulatory velocity at the edge of the vortical region, which links the cylinder's angular velocity with the circulation of the irrotational flow of the viscous fluid outside this region, and the viscous dissipation. Predictions from the approaches of Glauert (1957) and Wang & Joseph (2006a) are also included for comparison. The values of both effective thicknesses, $\delta_D/a$ and $\delta_L/a$, are found to have the same order of magnitude. Then, we show that choosing $\delta_D/a$ as a unique effective thickness, the modification of Glauert's boundary-layer analysis and the VCVPF approach as proposed by Wang & Joseph (2006a) produce results which are in better general agreement with the values from numerical simulation than those from Glauert's solution.

A Lagrangian roughness model integrated with the vortex method for drag coefficient estimation and flow control investigations around circular cylinder for a wide range of Reynolds numbers

System Identification and Model Predictive Control of Vortex Shedding Behind a Rotating Cylinder

Numerical Simulation of Viscous Flow Past an Oscillating Square Cylinder Using A Cip-Based Model

Simulation of vortex induced vibration of turbulent flow around a circular cylinder by plane turbulent models

Direct Numerical Simulation of Channel Flow with Real Surface Roughness Using a Ghost Cell Immersed Boundary Method

The Influence of Advection Schemes and Turbulence Closure Models on Drag Coefficient Calculation Around a Circular Cylinder at High Reynolds Number

Numerical Study on the Vortex Motion Patterns Around a Rotating Circular Cylinder and Their Critical Characters

Numerical Simulation of Turbulent Vortex Induced Vibration of a Circular Cylinder Adopted ALE Domain Decomposition Method

Large-eddy Simulation of Vortex-Induced Vibration of a Circular Cylinder at Reynolds Number 10 000

Flow of Power-Law Fluid Past a Circular Cylinder in the Vicinity of a Moving Wall

Drag Force on a Circular Cylinder in Stratified Flow: A Two-Dimensional Numerical Study

Dynamics of Two-Dimensional Flow Around a Circular Cylinder with Flexible Filaments Attached

Modeling rough walls from surface topography to double averaged Navier-Stokes computation

Numerical investigation of vortex-induced vibration of a porous-coated cylinder at subcritical Reynolds number with a combined k - ε model for porous medium

Simulation of Vortex-Induced Vibration for a Cylinder with Different Rounded Corners under Re = 150

Numerical study of the steady-state uniform flow past a rotating cylinder

A computational study of drag reduction and vortex shedding suppression of flow past a square cylinder in presence of small control cylinders

A perturbative model for predicting the high-Reynolds-number behaviour of the streamwise travelling waves technique in turbulent drag reduction

Experimental investigation on the optimal control of vortex shedding of a circular cylinder with rotating rods at moderate Reynolds numbers

Application and Optimization of Drag Reduction Characteristics on the Flow Around a Partial Grooved Cylinder by Using the Response Surface Method

Suppression of the Von Kármán Vortex Street Behind a Circular Cylinder by a Travelling Wave Generated by a Flexible Surface