Abstract:This article introduces a liquid desiccant fresh air processor. Its driving force is low-grade heat (heat obtained from 65 – 75°C hot water). Inside the processor, the air is dehumidified by the evaporative cooling energy of the indoor exhaust air. A four-stage structure is used to increase the efficiency of the combined sensible and latent heat recovery from the exhaust air. A mathematical model of the fresh air processor was set up using Simulink®. A liquid desiccant fresh air processor was constructed and tested for outside air conditions of 29.1 – 33.6°C, 13.7 – 16.7g/kg humidity ratio, and supply air conditions of 23.6 – 24.2°C, 7.4 – 8.6g/kg humidity ratio. The average measured COP f was 1.6 (cold production divided by latent heat removed) for the range of conditions tested. The corresponding average COP sys of the system including the regenerator was 1.3 (cold production divided by heat input). The detailed operating parameters of each part of the test unit were also measured. The test data was compared with the simulated performance. The characteristic coefficients (such as the volumetric mass transfer coefficient of the air-water evaporative cooling module, etc.) in the mathematical model were modified to calibrate the model output to the measured data. The calibrated simulation model was used to investigate the control strategy of the fresh air processor. The flow rate of the strong solution into the unit and the number of operation stages may be controlled separately or together to meet different indoor air requirements at different outdoor conditions. The hot water driven liquid desiccant air conditioning system was compared with a typical vapor compression system with an average COP of 4.5; the pump and fan power of the proposed system was 40% of the combined chiller, pump, and fan consumption. We achieved savings of over 30% of the power consumption compared with the traditional system under the designed outdoor air conditions.

Design and performance prediction of desiccant coated heat exchanger using ANFIS–AI tool and dynamic model

Experiments and modeling on thermal performance evaluation of standalone and M-cycle based desiccant air-conditioning systems

Performance prediction of rotary solid desiccant dehumidifier in hybrid air-conditioning system using artificial neural network

A Comparative Study and Prediction of the Liquid Desiccant Dehumidifiers Using Intelligent Models

Effect of geometry and operational parameters on the dehumidification performance of a desiccant coated heat exchanger

Parametric Studies of Silica Gel and Molecular Sieve Desiccant Wheels: Experimental and Modeling Approaches

Comparative Study on the Water Uptake Kinetics and Dehumidification Performance of Silica Gel and Fams Coatings

Heat and mass transfer model for desiccant solution regeneration process in liquid desiccant dehumidification system

A Simulation Study of Heat and Mass Transfer in A Honeycombed Rotary Desiccant Dehumidifier

Analytical Solution of Heat and Mass Transfer Process in Internally Cooled Liquid Desiccant Dehumidifiers Using Refrigerant As Cooling Medium

A mathematical model to predict the properties of solid desiccant heat pump by self-refined mesh algorithm

Performance Analysis on the Internally Cooled Dehumidifier Using Liquid Desiccant

Optimized design of Helical-Finned Double Pipe heat exchangers via numerical simulation and Artificial Intelligence

Experimental Comparison and Analysis on Silica Gel and Polymer Coated Fin-Tube Heat Exchangers

Simulation of adsorption process in a rotary solid desiccant wheel

Simulation and Experimental Analysis of A Fresh Air-Handling Unit with Liquid Desiccant Sensible and Latent Heat Recovery

A data-driven model for a liquid desiccant regenerator equipped with an evacuated tube solar collector: Random forest regression, support vector regression and artificial neural network

Experimental and theoretical study on water vapor isothermal adsorption-desorption characteristics of desiccant coated adsorber

Simulation Analysis on the Fresh Air Handling Unit with Liquid Desiccant Total Heat Recovery

Model-based Investigation of a Heat Pump Driven, Internally Cooled Liquid Desiccant Dehumidification System

Experimental Analysis of an Internally-Cooled Liquid Desiccant Dehumidifier