Abstract:Atomically dispersed (or single atom) iron–nitrogen–carbon (Fe–N–C) catalysts are promising alternatives to platinum group metal nanoparticles supported on dispersed carbon as a cathode material in proton-exchange membrane fuel cells. Here, the degradation mechanism of Fe–N–C catalysts, synthesized by the sacrificial support method (SSM), was investigated by conducting accelerated stress tests under the "load cycling" protocol (i.e. from 0.6 to 1.0 V vs the reversible hydrogen electrode). Electrocatalyst activity toward the oxygen reduction reaction (ORR) was studied for a SSM-derived material, obtained by a single pyrolysis under a 7% H2 atmosphere (Fe-HT1) and juxtaposed to that of a catalyst derived from the same sample, but subjugated to a second pyrolysis under 10% NH3 (noted as Fe-HT2). Several findings can be highlighted: (i) the second pyrolysis results in the skewing of the mesopore size toward higher diameter, along with an increase in iron content and N-pyridinic moieties, leading to a combined benefit in terms of ORR activity and selectivity, (ii) the morphological changes of these catalysts during ageing are drastically different depending on whether they were exposed to a second pyrolysis as, for example, (iii) for Fe-HT2, the formation of Fe-clusters was observed after the load cycling ageing protocol performed at T = 80 °C, along with the partial corrosion of the amorphous domains. No clustering was observed at T = 60 °C concomitantly with a higher ORR mass activity retention providing some guidelines to improve the stability of Fe–N–C materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c04625?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c04625</a>.Carbon speciation extracted from XPS patterns; nitrogen speciation extracted from XPS patterns; MA toward the ORR, active SD, and TOF values of the Fe-HT2 catalyst before and after different LC protocols; XRD patterns, Raman spectra, and BET results for the fresh iron-based catalysts; CVs and RRDE polarization curves for the peroxide species quantification for Fe-HT1 and Fe-HT2; CVs and ORR polarization curves and Tafel plots for the SD and TOF determination of Fe-HT1 and Fe-HT2 using the nitrite adsorption/reduction method; CVs and ORR polarization curves before and after ASTs for Fe-HT1 and Fe-HT2 catalysts; and TEM images of the Fe-HT2 catalyst before and after ASTs performed under Ar or O2 atmospheres (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c04625/suppl_file/cs0c04625_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Atomically dispersed iron sites with a nitrogen–carbon coating as highly active and durable oxygen reduction catalysts for fuel cells

Stabilizing single-atom iron electrocatalysts for oxygen reduction via ceria confining and trapping

Durable and High-Power Iron-Based Cathodes in Competition with Platinum for Proton-Exchange Membrane Fuel Cells

Durable and High-Power Iron-Based Cathodes for Proton-Exchange Membrane Fuel Cells

Durable and Active Nitrogen‐Coordinated Iron Single‐Atom Catalyst for Proton Exchange Membrane Fuel Cells Through Carbon Encapsulation

Iron, Nitrogen Co‐Doped Carbon Spheres As Low Cost, Scalable Electrocatalysts for the Oxygen Reduction Reaction

Tunable Synthesis of Hollow Metal-Nitrogen-Carbon Capsules for Efficient Oxygen Reduction Catalysis in Proton Exchange Membrane Fuel Cells.

Performance enhancement and degradation mechanism identification of a single-atom Co–N–C catalyst for proton exchange membrane fuel cells

Challenging the Activity-Durability Tradeoff of Fe-N-C Fuel Cell Catalysts via Controlling thermal Activation Atmosphere

Chemical vapour deposition of Fe–N–C oxygen reduction catalysts with full utilization of dense Fe–N4 sites

Nitrogen Doped Titania Stabilized Pt/C Catalyst Via Selective Atomic Layer Deposition for Fuel Cell Oxygen Reduction

Tuning the thermal activation atmosphere breaks the activity–stability trade-off of Fe–N–C oxygen reduction fuel cell catalysts

Solid-State Synthesis of Highly Dispersed Nitrogen-Coordinated Single Iron Atom Electrocatalysts for Proton Exchange Membrane Fuel Cells

Atomically dispersed single iron sites for promoting Pt and Pt<sub>3</sub>Co fuel cell catalysts: performance and durability improvements

Design and Preparation of Fe-N5 Catalytic Sites in Single-Atom Catalysts for Enhancing the Oxygen Reduction Reaction in Fuel Cells

Fe–N–C Electrocatalysts’ Durability: Effects of Single Atoms’ Mobility and Clustering

Atomically dispersed iron atoms on nitrogen-doped porous carbon catalyst with high density and accessibility for oxygen reduction

Iron atom–cluster interactions increase activity and improve durability in Fe–N–C fuel cells

Enhanced stability and activity of platinum-based catalyst using iron-nitrogen co-doped graphene as support for oxygen reduction reaction

Cooperative Atomically Dispersed Fe-N 4 and Sn-N x Moieties for Durable and More Active Oxygen Electroreduction in Fuel Cells

High loading of single atomic iron sites in Fe–NC oxygen reduction catalysts for proton exchange membrane fuel cells