Influence of Gas Hydrate on the Acoustic Properties of Sediment: A Comprehensive Review with a Focus on Experimental Measurements

Qi ZHANG,Xin LIU,Tao HE,Hailong LU

DOI: https://doi.org/10.1111/1755-6724.14932

2022-04-30

Abstract:Acta Geologica Sinica - English Edition, Volume 96, Issue 2, Page 713-726, April 2022.

What problem does this paper attempt to address?

Effect of Sediment Stratification on the Mechanical and Acoustic Properties of Hydrate-Bearing Sediments

Weiguo Liu,Yuanxin Song,Tao Liu,Haoran Tang,Peng Wu,Yanghui Li,Yongchen Song

DOI: https://doi.org/10.1021/acs.energyfuels.4c00046

IF: 4.6541

2024-03-22

Energy & Fuels

Abstract:Natural gas hydrate (NGH) is the commanding height of future energy development strategies. Comprehensively revealing the mechanical behavior of NGH reservoirs is the primary guarantee to ensure safe utilization of hydrate resources. However, due to the complexity of accumulation and deposition, NGH in the enrichment area of reservoirs is usually not homogeneous. However, the impact of the NGH layered heterogeneous distribution on the mechanical properties of hydrate-bearing sediment (HBS) remains unclear. In this study, based on this geological background, several sets of triaxial shear tests were carried out, and a comprehensive analysis of mechanical properties was carried out by coupling acoustic characteristics tests. The stratification effect of sediments changes the stress–strain response curve of HBS from traditional strain hardening or strain softening to “secondary strain hardening”; this hardening phenomenon only occurs once and is not affected by the number of sediment layers. Also, an increasing sediment stratification effect would enhance the HBS strength and dilatancy. The sediment stratification effect will reduce the compressional and shear-wave velocity of the HBS. The sound velocity increases rapidly during the shearing process and remains unchanged after yielding. This study is important for the safe exploitation of hydrates under geological stratification conditions.

energy & fuels,engineering, chemical
Rock Physics Modeling of Acoustic Properties in Gas Hydrate-Bearing Sediment

Linsen Zhan,Biao Liu,Yi Zhang,Hailong Lu

DOI: https://doi.org/10.3390/jmse10081076

IF: 2.744

2022-01-01

Journal of Marine Science and Engineering

Abstract:Gas hydrates (GH) are well known to have an influential effect on the velocity and attenuation of gas hydrate-bearing sediments (GHBS). Based on rock physics modeling, sediment velocity has been extensively used to characterize the distribution of gas hydrate. However, the results obtained from different models show a significant variation. In this study, we firstly review and compare the existing rock physics modeling for velocity and attenuation. The assumption, characteristics, theoretical basis, and workflow of the modeling are briefly introduced. The feasibility and limitations of the published models are then discussed and compared. This study provides insight into how to select a suitable rock physics model and how to conduct modeling in the application of the rock physics model to field data. Then, we introduce how to predict hydrate saturation, hydrate morphology, the dip angle of fracture, sediment permeability, and attenuation mechanisms from the comparison between the modeled and measured acoustic properties. The most important application of rock physics modeling is predicting the hydrate saturation and we discuss the uncertainties of the predicted saturation caused by the errors related to the velocity measurements or rock physics modeling. Finally, we discuss the current challenges in rock physics modeling related to optimizing the input parameters, choice of a suitable model, and upscaling problems from ultrasonic to seismic and well log frequencies.
Effect of Methane Gas on Acoustic Characteristics of Hydrate-Bearing Sediment-Model Analysis and Experimental Verification

Qingtao Bu,Gaowei Hu,Changling Liu,Jie Dong,Tongju Xing,Jianye Sun,Chengfeng Li,Qingguo Meng

DOI: https://doi.org/10.1007/s11802-021-4354-7

2021-01-12

Journal of Ocean University of China

Abstract:Gas leakage is an important consideration in natural systems that experience gas hydrate accumulation. A number of velocity models have been created to study hydrate-bearing sediments, including the BGTL theory, the weighted equation, the Wood equation, the K-T equation, and the effective medium theory. In previous work, we regarded water as the pore fluid, which meant its density and bulk modulus values were those of water. This approach ignores the presence of gas, which results in a biased calculation of the pore fluid's bulk modulus and density. To take into account the effect of gas on the elastic wave velocity, it is necessary to recalculate the bulk modulus and density of an equivalent medium. Thus, a high-pressure reactor device for simulating leakage systems was developed to establish the relationship between wave velocity and hydrate saturation in methane-flux mode. A comparison of the values calculated by the velocity model with the experimental data obtained in this study indicates that the effective medium theory (EMT, which considers gas effects) is more applicable than other models. For hydrate saturations of 10%–30%, the result ranges between EMT-B (homogenous gas distribution) and EMT-B (patchy gas distribution). For hydrate saturations of 30%–60%, the results are similar to those of the EMT-B (homogenous gas distribution) mode, whereas hydrate saturations of 60%–70% yield results similar to those of the EMT-A mode. For hydrate saturations greater than 80%, the experimental results are similar to those of the EMT-B mode. These results have significance for hydrate exploitation in the South China Sea.

oceanography
Inversion of gas hydrate saturation and solid frame permeability in a gas hydrate-bearing sediment by Stoneley wave attenuation

Lin Liu,Xiumei Zhang,Xiuming Wang

DOI: https://doi.org/10.1190/geo2023-0604.1

IF: 3.264

2024-08-15

Geophysics

Abstract:GEOPHYSICS, Volume 89, Issue 5, Page D267-D274, September-October 2024.

geochemistry & geophysics
Methane Flux Effect on Hydrate Formation and Its Acoustic Responses in Natural Sands

Qingtao Bu,Tongju Xing,Gaowei Hu,Changling Liu,Chengfeng Li,Jinhuan Zhao,Zihao Wang,Wengao Zhao,Jiale Kang

DOI: https://doi.org/10.1155/2022/7746386

IF: 2.006

2022-05-31

Geofluids

Abstract:The acoustic properties of hydrate deposits are important parameters for hydrate geophysical exploration, and the gas leakage model plays a very important role in hydrate accumulation systems. In order to reflect the gas supply environment during hydrate formation, a high-pressure device with a simulated leakage system was designed to achieve different methane flux supplies. The effects of different methane fluxes on the hydrate formation rate and the maximum hydrate saturation were obtained. The results in this study indicate that similar hydrate formation rates occur in systems with different methane fluxes. However, when the methane flux is large, it takes longer to reach the maximum hydrate saturation, and the larger the methane flux, the larger the hydrate saturation formed. In each methane flux system, the elastic velocity increased slowly with increasing hydrate saturation at the beginning of hydrate formation, but velocity increased quickly when the hydrate saturation reached 50–60%. In order to take into account the effect of the gas, the calculated values of the elastic velocity model were compared with the experimental data, which indicated that the BGTL theory and the EMT model are more adaptable and can be used to deduce hydrate morphology. In the large methane flux system, the hydrate mainly forms at grain contacts when the hydrate saturation is 10–60%. As the hydrate saturation reaches 60–70%, hydrate forms first in the pore fluid, and then the hydrates contact sediment particles.

geochemistry & geophysics,geology
Experimental Insights Into the In Situ Formation and Dissociation of Gas Hydrate in Sediments of Shenhu, South China Sea

Qian Zhang,Xuwen Qin,Hong Zhang,Yanhui Dong,Cheng Lu,Shouding Li,Luokun Xiao,Chao Ma,Hang Bian

DOI: https://doi.org/10.3389/feart.2022.882701

IF: 2.9

2022-05-12

Frontiers in Earth Science

Abstract:Natural gas hydrates as sustainable energy resources are inherently affected by mineral surfaces and confined spaces in reservoirs. However, the habits of hydrates in geological sediments are still an open question. In this work, we systemically studied the process of hydrate formation and dissociation in sediments from the Shenhu area of the South China Sea to examine the evolution of hydrate saturation and permeability in sediments and their relationship. Characterization of samples indicates that sediments of the Shenhu area are mainly composed of clay and fine sand grains and provide a large number of nanopores for hydrate accumulation. For in situ observations enabled by low-field nuclear magnetic resonance methods, the formation of hydrates shows a different kinetic behavior with an induction time compared to hydrate dissociation. Estimated by variations of hydrate saturation (%) over time, the rate of hydrate formation is around 12%/min, while the dissociation rate increases to 3%/min with the higher temperature. With the presence of hydrates, pore space and thus permeability of sediments decreased obviously by one and three orders of magnitude when the hydrate saturation is 20 and 45%, respectively. Compared to models with the assumption of grain-coating and pore-filling hydrates, the tendency of permeability evolution from NMR measurements is between fitted lines from models. It highlights that the existing models considering a single pattern of hydrate growth cannot precisely describe the relationship between permeability and hydrate saturation. Hybrid hydrate habits coexist in sediments resulting from heterogeneous pore structures and thus complex gas–water distributions.

geosciences, multidisciplinary
Effects of hydrate occurring mechanisms and saturation on the mechanical properties of hydrate-bearing sediments: Numerical study based on simplified DEM simulation

Zhenhua Han,Luqing Zhang,Jian Zhou,Zhejun Pan,Song Wang,Ruirui Li

DOI: https://doi.org/10.1016/j.jngse.2022.104804

IF: 5.285

2022-12-01

Journal of Natural Gas Science and Engineering

Abstract:Natural gas hydrate is a strategic alternative energy source which are widely founded in seabed sediments. The study of the mechanical properties of hydrate-bearing sediments is the key content to ensure the safe exploitation of gas hydrate. Hydrate occurring mechanisms and saturation are important factors affecting the mechanical properties of hydrate-bearing sediments. In this work, simplified discrete element models that consider the hydrate occurring mechanism, hydrate saturation and confining pressure, were generated based on PFC code. Three main hydrate occurring mechanisms including pore filling, load bearing and cementation were characterized. The triaxial compression simulation was then conducted to investigate the model mechanical properties. The results show that the hydrate of cementation mode has the most obvious strength-enhancing effect on sediments, followed by the load bearing model and pore filling model. Hydrate occurring mechanism also affect the increasing trend of sediment strength and deformation modulus with hydrate saturation and confining pressure. The influence of hydrate occurrence mechanism on the mechanical behavior of sediment is largely controlled by the interaction between hydrate and sand particles interface. The hydrate of cementation mode increases the cohesion of the sediment particles, the hydrate of pore filling mode increases the friction between particles, and the hydrate of load bearing mode has the combined effects of the above two.

energy & fuels,engineering, chemical
Dependence of acoustic properties on hydrate-bearing sediments with heterogeneous distribution

Liang-Liang Ren,Ya-Hui Qi,Jun-Li Chen,Yi-Fei Sun,Chang-Yu Sun,Xiao-Hui Wang,Guang-Jin Chen,Qing Yuan,Wei-Xin Pang,Qing-Ping Li

DOI: https://doi.org/10.1016/j.apenergy.2020.115211

IF: 11.2

2020-10-01

Applied Energy

Abstract:<p>The relationship between the hydrate-bearing sediments with physical properties such as wave velocity is of importance for the exploration and exploitation of natural gas hydrate. The distribution modes of naturally occurring gas hydrates in sediments are diverse and have significant influence on physical properties of rocks. However, hydrates in homogeneous distribution are in general investigated in laboratory currently. In this work, to simulate the diverse distribution modes of naturally occurring gas hydrates, a novel method to prepare the hydrate-bearing sediments with heterogeneous distribution including layered distribution was proposed by controlling the temperature, water migration, and water saturation distribution. Velocity and amplitude of P-wave are investigated to evaluate the physical properties of hydrate-bearing sediments with homogeneous or heterogeneous distribution. The results showed that the hydrate formation process apparently consists of unconsolidated and consolidated steps according to the amplitude curve. The amplitude of P-wave in the unconsolidated stage increases slowly, while it increases suddenly and rapidly in the consolidated stage. The P-wave velocity of the hydrate deposits with homogeneous distribution is faster than that with heterogeneous distribution when under a same hydrate saturation. This is also verified from the experiments performed on hydrate-bearing sediments with layered distribution, which provided direct evidence and quantification about heterogeneous degree of hydrate distribution in sediment. This difference of the P-wave velocity between heterogeneous and homogeneous hydrate-bearing sediments would provide a guidance in the future development of natural gas hydrate.</p>

energy & fuels,engineering, chemical
Characterization of Coexistence of Gas Hydrate and Free Gas Using Sonic Logging Data in the Shenhu Area, South China Sea

Linsen Zhan,Dongju Kang,Hailong Lu,Jingan Lu

DOI: https://doi.org/10.1016/j.jngse.2022.104540

IF: 5.285

2022-01-01

Journal of Natural Gas Science and Engineering

Abstract:Recent studies have confirmed the coexistence of gas hydrate (GH) and free gas (FG) in gas hydrate stability zone (GHSZ). However, the acoustic properties of the coexisting sediment, GH-bearing sediment, and FG-bearing sediment are needed to be specified, for discriminating these three coexisting phases using sonic logs. In this study, the compressional-(P-) and shear (S-) wave attenuations of the sediment with coexisting GH and FG are calculated from the sonic logs in the South China Sea (SCS). The obtained results reveal that the P-wave and S wave velocities of the sediment with coexisting GH and FG are decreased by 14% and 11%, P-wave attenuation enhanced by 104%, and S-wave attenuation decreased by 44%, respectively, as compared with the sediment only containing GH at well SHSC-4J1. A similar result can be obtained for well GMGS6-SH02. The highest P-wave attenuation appears in the sediment with coexisting GH and FG,-0.66 at well SHSC-4J1 and-0.60 at well GMGS6-SH02, respectively. Moreover, cross plots of the measured P-and S-wave velocities and attenuations suggest that attenuation is more sensitive to the coexistence of GH and FG than velocity. The saturation of coexisting GH and FG in sediment can be calculated from the sonic velocities using rock physics modeling, a maximum value of-26% (av. 13%) at well SHSC-4J1 and a maximum value of-23% (av. 7%) at well GMGS6SH02.
Wave Propagation Characteristics in Gas Hydrate-Bearing Sediments and Estimation of Hydrate Saturation

Lin Liu,Xiumei Zhang,Xiuming Wang

DOI: https://doi.org/10.3390/en14040804

IF: 3.2

2021-02-03

Energies

Abstract:Natural gas hydrate is a new clean energy source in the 21st century, which has become a research point of the exploration and development technology. Acoustic well logs are one of the most important assets in gas hydrate studies. In this paper, an improved Carcione–Leclaire model is proposed by introducing the expressions of frame bulk modulus, shear modulus and friction coefficient between solid phases. On this basis, the sensitivities of the velocities and attenuations of the first kind of compressional (P1) and shear (S1) waves to relevant physical parameters are explored. In particular, we perform numerical modeling to investigate the effects of frequency, gas hydrate saturation and clay on the phase velocities and attenuations of the above five waves. The analyses demonstrate that, the velocities and attenuations of P1 and S1 are more sensitive to gas hydrate saturation than other parameters. The larger the gas hydrate saturation, the more reliable P1 velocity. Besides, the attenuations of P1 and S1 are more sensitive than velocity to gas hydrate saturation. Further, P1 and S1 are almost nondispersive while their phase velocities increase with the increase of gas hydrate saturation. The second compressional (P2) and shear (S2) waves and the third kind of compressional wave (P3) are dispersive in the seismic band, and the attenuations of them are significant. Moreover, in the case of clay in the solid grain frame, gas hydrate-bearing sediments exhibit lower P1 and S1 velocities. Clay decreases the attenuation of P1, and the attenuations of S1, P2, S2 and P3 exhibit little effect on clay content. We compared the velocity of P1 predicted by the model with the well log data from the Ocean Drilling Program (ODP) Leg 164 Site 995B to verify the applicability of the model. The results of the model agree well with the well log data. Finally, we estimate the hydrate layer at ODP Leg 204 Site 1247B is about 100–130 m below the seafloor, the saturation is between 0–27%, and the average saturation is 7.2%.

energy & fuels
Review and Outlook of Visual and Geophysical Detections for the Pore-Scale Morphology of Gas Hydrates

Xin Liu,Qi Zhang,Tao He

DOI: https://doi.org/10.1021/acs.energyfuels.3c03371

IF: 4.6541

2023-01-01

Energy & Fuels

Abstract:The physical properties of gas hydrate-bearing sediments are closely related to the pore morphology of hydrates. According to the contact relationship and coupling strength between hydrates and sediment grains, the pore-scale morphology of gas hydrates is generally divided into pore suspending, frame supporting, and grain cementing. The studies of hydrate morphology are of great significance in evaluating gas hydrate resources. This review article reviews the main methods, new progress, existing problems, and development trends of hydrate morphology research. The research methods for hydrate morphology are mainly divided into two categories. One method is directly observing hydrate morphology and distribution characteristics via visualization methods (e.g., X-CT, MRI, microfluidics, and SEM). The other is indirectly identifying the hydrate morphology via geophysical responses (e.g., acoustic velocity and electrical resistivity) combined with rock physics models. Resistivity properties can distinguish between pore-suspending and frame-supporting hydrates at low hydrate saturation. Acoustic properties reflect the coupling strength between hydrates and sediment grains and thus confirm pore-suspending, frame-supporting, and grain-cementing hydrates at medium and high hydrate saturation. The proportions of different hydrate morphologies are unclear, dramatically increasing the uncertainty in predicting the physical properties of hydrate-bearing sediments and assessing gas hydrate resources. The joint analysis of visual observation and geophysical measurement reduces this uncertainty and provides a feasible method for quantitatively characterizing the hydrate morphology.
Experimental study of the velocity and resistivity variations along with methane hydrate saturation in unconsolidated sediments

HE Tao*,YANG Zhiqiang,LU Hailong

DOI: https://doi.org/10.1190/rpwk2019-014.1

2020-01-01

Abstract:PreviousNext No Access2nd SEG Rock Physics Workshop: Challenges in Deep and Unconventional Oil/Gas Exploration, Qingdao, China, 25–27 October 2019Experimental study of the velocity and resistivity variations along with methane hydrate saturation in unconsolidated sedimentsAuthors: HE Tao*YANG ZhiqiangLU HailongHE Tao*The Key Laboratory of Orogenic Belts and Crustal Evolution (MOE), School of Earth and Space Sciences, Peking UniversityBeijing International Center for Gas Hydrate, Peking UniversitySearch for more papers by this author, YANG ZhiqiangThe Key Laboratory of Orogenic Belts and Crustal Evolution (MOE), School of Earth and Space Sciences, Peking UniversitySearch for more papers by this author, and LU HailongBeijing International Center for Gas Hydrate, Peking UniversityDepartment of Energy & Resources Engineering, College of Engineering, Peking UniversitySearch for more papers by this authorhttps://doi.org/10.1190/rpwk2019-014.1 SectionsAboutPDF/ePub ToolsAdd to favoritesDownload CitationsTrack CitationsPermissions ShareFacebookTwitterLinked InRedditEmail Abstract A new experimental method and a new instrument system were designed to laboratorially simulate the growth process of dispersed gas hydrate in unconsolidated marine sediments. Under brine-saturated and macroscopically undrained condition, the methane hydrate was formed from pore brine and dissolved methane. During methane hydrate formation, we in-situ measured the important geophysical properties of compressional and shear wave velocities (VP and VS) and resistivity. The experimental results also showed that the influence of free methane gas in sediment pore space on VP and resistivity of sediment can not be neglected. An acoustic-electrical combined rock physical model was developed with the granular media contact theory, Gassmann's relation and Archie's law. With the qualitative analysis of experimental data and the quantitative prediction of the rock physical model, the major occurrence state of methane hydrate in sediment pore space could be estimated. Keywords: resistivity, sediment, acoustic, shear wavePermalink: https://doi.org/10.1190/rpwk2019-014.1FiguresReferencesRelatedDetails 2nd SEG Rock Physics Workshop: Challenges in Deep and Unconventional Oil/Gas Exploration, Qingdao, China, 25–27 October 2019ISSN (online):2159-6832Copyright: 2020 Pages: 58 publication data© 2019 Published in electronic format with permission by the Society of Exploration Geophysicists, China University of Petroleum (East China), Hohai UniversityPublisher:Society of Exploration Geophysicists HistoryPublished Online: 14 Apr 2020 CITATION INFORMATION HE Tao*, YANG Zhiqiang, and LU Hailong, (2020), "Experimental study of the velocity and resistivity variations along with methane hydrate saturation in unconsolidated sediments," SEG Global Meeting Abstracts : 21-21. https://doi.org/10.1190/rpwk2019-014.1 Plain-Language Summary Keywordsresistivitysedimentacousticshear wavePDF DownloadLoading ...
Introducing Realistic Distributions of Gas Bubble Size and Inclusion Aspect Ratio to Model the Coexistence of Gas Hydrate and Free Gas

Linsen Zhan,Hailong Lu

DOI: https://doi.org/10.1016/j.jappgeo.2023.105023

IF: 1.845

2023-01-01

Journal of Applied Geophysics

Abstract:The coexisting free gas within the hydrate stability zone is recognized by laboratory and field studies. The conventional resistivity method fails to obtain hydrate saturation in the sediment with gas hydrate and free gas because both of them are electrical insulators. Hydrate saturation can be obtained from a velocity log based on a certain rock physics model. However, few studies of rock physics have been conducted on gas and hydrate coexistence. In this study, a more realistic distribution of gas bubble size and inclusion aspect ratio was introduced into an effective medium model to elucidate how such coexistence affects velocity and attenuation at a broad-band frequency. The modeling results obtained indicate that such coexistence decreases P-wave velocity at low frequencies, while increases P- and S-wave velocities at high frequencies. The velocity decrease of P-wave at low frequencies is attributed to the overwhelming effect of gas bubble vibration, while it seems not to affect P-wave velocity at high frequencies significantly. Moreover, coexisting gas hydrate and free gas may strengthen P-wave attenuation at the broad-band frequency range. It is found that the damping of oscillating gas bubbles dominates P-wave attenuation at low frequencies, while squirt flow in the porous hydrate is more likely to contribute to P-wave attenuation at high frequencies. Hydrate morphology is also a significant factor affecting P-wave velocity and attenuation at high frequencies. This research reveals that rock physics modeling can provide insight into how to characterize the coexisting gas hydrate and free gas as referring to the acoustic velocity and attenuation at seismic, sonic, and ultrasonic frequencies.
An Experimental Study from the South China Sea

Qingmeng Yuan,Liang Kong,Qianyong Liang,Jinqiang Liang,Lin Yang,Yifei Dong,Zhigang Wang,Xuemin Wu

DOI: https://doi.org/10.3390/jmse12020301

IF: 2.744

2024-02-09

Journal of Marine Science and Engineering

Abstract:Clarifying the mechanical characteristics of gas hydrate-bearing sediments (GHBS) from a mechanical perspective is crucial for ensuring the long-term, safe, and efficient extraction of natural gas hydrates. In this study, seabed soft clay from the northern South China Sea was utilized to prepare clayey silt samples, aligning with gradation curves related to hydrate extraction projects in the Shenhu area of the South China Sea. Utilizing the high-pressure low-temperature hydrate triaxial testing system (ETAS), twelve sets of triaxial shear tests were conducted. The results highlight that increases in hydrate saturation and confining pressure significantly enhance GHBS' strength and stiffness, with more pronounced volume expansion observed during shearing. These tests have elucidated the mechanical responses of GHBS. Subsequently, empirical formulas were developed to characterize their properties under varying conditions. Additionally, based on the experimental data, the micro-mechanisms of GHBS were analyzed, suggesting that hydrates notably contribute to the filling and cementing effects in GHBS, with these effects varying with changes in hydrate saturation and confining pressure. This study contributes to a deeper understanding of the fundamental mechanical properties of GHBS.

oceanography,engineering, marine, ocean
Effect of Hydrate Distribution on the Mechanical Response of Hydrate-Bearing Sand: Discrete Element Method Simulation

Zeshao You,Peng Wu,Xiang Sun,Yu Liu,Tao Li,Yanghui Li

DOI: https://doi.org/10.1021/acs.energyfuels.2c00122

2022-03-28

Abstract:Natural gas hydrates are cage-like crystalline solids that are globally recognized as a potential energy suitable for sustainable development. Hydrate distribution often affects the mechanical properties of hydrate-bearing sediments. The objective of this work is to investigate the underlying strengthening mechanisms of hydrate-bearing sediments under different hydrate distributions. The discrete element method is used to prepare numerical hydrate-bearing sediments and simulate biaxial compression tests. Hydrates are simulated as small cemented particles that are either randomly distributed or gathered filling the hydrate-free sediments. The simulation results show that at hydrate saturation of 45%, the sediment with randomly distributed hydrates exhibits higher peak strength, strain-softening and a run-through shear band, while the sediment with gathered hydrates shows higher residual strength and a cross-type shear band. Micromechanical exploration finds that many hydrate-related micro force chains are created to share the load component. In the sediment with a randomly distributed hydrate, a more stable force chain complex is formed, which is subjected to a smaller force concentration, improving the strength and stability of the sediment. As the hydrate particles gather in the sediment, the bonding forces become more concentrated and the hydrate can participate in the skeleton that contributes to the residual strength of the sediment.This article has not yet been cited by other publications.

energy & fuels,engineering, chemical
Effect of Gas Hydrate Formation and Dissociation on Porous Media Structure with Clay Particles

Yu Feng,Aoxing Qu,Yuze Han,Changrui Shi,Yanzhen Liu,Lunxiang Zhang,Jiafei Zhao,Lei Yang,Yongchen Song

DOI: https://doi.org/10.1016/j.apenergy.2023.121694

IF: 11.2

2023-01-01

Applied Energy

Abstract:Natural gas hydrates are a potential future energy modality with the advantages of clean burning and large resource reserves and have attracted worldwide attention. Natural gas hydrates formation and dissociation impact the skeletal structure and mechanical properties of porous media sediments. In addition, there is a synergistic effect between the migration of fine clay particles in porous media and hydrate behavior. In this study, methane hydrate was examined in-situ using a low-field nuclear magnetic resonance system in the presence of two suspensions of clay particles with different stability. The results showed that clay particles impacted methane hydrate formation and dissociation and the pore structure of porous media. Hydrate nucleated preferentially in large pores, causing them to split into smaller pores; the presence of clay particles, especially illite, improved the water conversion rate. The results indicated that water content in large pores increased after hydrate dissociation but was discontinuous among different pores. When illite was present, the distribution was more continuous; when montmorillonite was present, the water distribution of the large pores was similar to that of the original state. This work increases our understanding of the kinetics, water migration, and pore structure alteration of methane hydrate formation and dissociation in sediments with clay particles and provides support for the safe and efficient development of natural gas hydrates.
Synergistic Elastic and Electrical Modeling for Quantitative Analysis of Gas Hydrate Formation Evolution in Pores

Qi Zhang,Tao He,Hailong Lu,Mucong Zi,Daoyi Chen

DOI: https://doi.org/10.1190/geo2024-0314.1

IF: 3.264

2024-01-01

Geophysics

Abstract:Pore-invasive gas hydrates represent a dominant reservoir type that has garnered increasing global attention. However, the current understanding of their formation evolution in sediments remains superficial, impeding efforts toward recovery assessment. In contrast to predominantly qualitative approaches found in current literature, a novel method for a more quantitative understanding of this dynamic process is presented. Leveraging granular medium contact theory and Gassmann's equation, we develop an elastic model that accounts for hydrate pore morphologies within sediment pores. Our elastic model calculations unveil the significant impact of initial porosity and hydrate saturation on P- and S-wave velocities, highlighting the non-uniqueness of discriminating hydrate morphology based on these velocities alone. To address the variability in hydrate electrical properties, we refine Archie's law by introducing an empirical parameter, the ion concentration exponent, which better accounts for the distribution of hydrates and the associated effect on the conductivity of pores. Although our experimental method may lead to a ring-shaped distribution of hydrate saturation within the sample, the modeling results suggest that a uniform distribution of hydrates within the pore framework is more plausible to experimental measurements. Recognizing the shortcomings of prevalent models, we propose an innovative elastic inversion approach that simulates the hydrate accumulation process, reflecting the progressive solidification impact of increasing hydrate saturation. Employing a synergistic elastic and electrical rock physics framework, we analyze experimental geophysical data to trace the hydrate formation trajectory. Our interpretations illustrate an initial dominance of grain-supporting hydrates, transitioning to contact-cementing and pore-filling morphologies at advanced saturation levels. This joint models provide valuable insights into the quantitative assessment of gas hydrate reservoirs, offering a comprehensive understanding of the intricate interplay between elastic and electrical properties during hydrate growth.
Physical Characteristic Analysis of Unconsolidated Sediments Containing Gas Hydrate Recovered from the Shenhu Area of the South China Sea

Yangmin Kuang,Lei Yang,Qingping Li,Xin Lv,Yuanping Li,Bin Yu,Shudong Leng,Yongchen Song,Jiafei Zhao

DOI: https://doi.org/10.1016/j.petrol.2019.06.037

IF: 5.168

2019-01-01

Journal of Petroleum Science and Engineering

Abstract:Laboratory research based on the physical characteristics of unconsolidated sediments containing gas hydrate was carried out on hydrate-bearing sediment samples recovered from China National Offshore Oil Corporation (CNOOC) drilling expeditions in 2015 and 2017 at the station of LW3 in the northern part of the South China Sea. We herein have measured the gas composition, index properties, surface characteristics, thermal properties, and mechanical properties of these sediment cores drilled at different seafloor depths. Based on the measurement results, more than 99% of the gas composition is methane gas. The hydrate-bearing sediments recovered from Shenhu Area are non-diagenetic rock, the fraction of grain size which less than 40 mu m was more than 90%. The results could provide useful guidance for potential sand-control system operations. Such small and consolidated particles indicated that the application of a novel solid fluidization mining method is viable and promising. The fine-grained layers were found to be mostly self-filtering and internally stable for the seepage flow during production. Gas hydrate mostly occurs in vein-type, and bioclastics consisting of marine planktonic diatoms and foraminifera were also found. The mineral components of the sediments were mostly quartz, clay minerals like illite and some feldspar like albite. The thermal conductivities changed from 1.4 to 1.77 W/(mK), which suggests that the isolated depressurization methods could exacerbate the problem of gas hydrate reformation or ice generation; thus, heat injection in wellbores should be combined for gas hydrate production strategies. The low liquid limit (38%) and plastic limit (24%) imply that stability of the production platform should be taken into account for avoiding submarine landslide impacts. The results of mechanical property analyses indicated that hydrate-bearing sediments at deeper sites have a relatively higher strength at hydrate layer of 120-133 mbsf in the Shenhu Area of the South China Sea.
Numerical Simulation of Direct Shear Tests on Gas Hydrate-Bearing Sediments Using the Discrete Element Method

Anna Qian,Yanlu Ding,Hailong Lu,Yahong Wu

DOI: https://doi.org/10.1016/j.jgsce.2023.204995

2023-01-01

Gas Science and Engineering

Abstract:Natural gas hydrate is a potential unconventional energy resource. Understanding the mechanical behavior of gas hydrate-bearing sediments (GHBS) is important to ensure the safe and efficient exploitation of natural gas hydrate and prevent geohazard problems. This study employs discrete element method to investigate the mechanical properties of GHBS with different hydrate saturations under various vertical stresses, and a series of direct shear tests, which requires less computational consumption than triaxial or biaxial tests. Comprehensive analyses of macroscopic and microscopic mechanical behaviors, including shear strength, internal friction angle, cohesion, shear band, average coordination number, and crack number evolution, are carried out, as an effort for understanding the shear strength breakpoint, which is recognized in laboratory experiments, probably caused by the transition in hydrate morphology in sediment pores. The results obtained reveal that: (1) the way of hydrate in strengthening GHBS is to enhance cohesion; (2) the increasing rate of the strength difference between the sediment matrix with and without hydrate remarkably increases when the hydrate saturation is over certain value at which the shear strength breakpoint is observed, and this rate decreases with the increase in median particle diameter (D50) of host sediments; (3) the transition in hydrate morphology in sediment pores is recognized when the hydrate saturation increases at microscale; and (4) the shear strength breakpoint in the curve of strength difference versus hydrate saturation is explained based on the micromechanical properties of GHBS, including shear bandwidth, average coordination number, average normal force, and crack number evolution.
Influence of gas hydrate saturation and pore habits on gas relative permeability in gas hydrate-bearing sediments: Theory, experiment and case study

Xuefeng Liu,Huaimin Dong,Weichao Yan,Muhammad Arif,Yihuai Zhang,Naser Golsanami

DOI: https://doi.org/10.1016/j.jngse.2021.104171

IF: 5.285

2021-11-01

Journal of Natural Gas Science and Engineering

Abstract:Gas relative permeability characterization is of key significance to model the behavior of gas flow in gas hydrate-bearing sediments. The present study proposes a novel model to relate gas relative permeability to gas hydrate saturation based on X-ray micro-CT imaging information of xenon hydrate pore-scale distribution in sand sediments. Lattice Boltzmann method (LBM) was used to obtain permeability values of xenon hydrate-bearing sediments via micro-CT data. The results showed that gas relative permeability (Kr) versus gas hydrate saturation (Sh) data are consistent with the new model and the imitative effect is relatively better than that of the simple Corey model. Besides, we calculated gas relative permeability versus gas hydrate saturation curves for various pore habits via idealized models. Experimental measurements and simulation results showed that the grain-coating gas hydrate exhibits the highest gas relative permeability, while pore-filling gas hydrate exhibits the lowest values of gas relative permeability, and the cementing gas hydrate ranges in between. We validated the new gas relative permeability calculation model by applying it to the well logging data of gas hydrate reservoirs. Our results showed that the novel model is beneficial for permeability characterization of gas hydrate reservoirs and gas relative permeability calculations.

energy & fuels,engineering, chemical

Influence of Gas Hydrate on the Acoustic Properties of Sediment: A Comprehensive Review with a Focus on Experimental Measurements

Effect of Sediment Stratification on the Mechanical and Acoustic Properties of Hydrate-Bearing Sediments

Rock Physics Modeling of Acoustic Properties in Gas Hydrate-Bearing Sediment

Effect of Methane Gas on Acoustic Characteristics of Hydrate-Bearing Sediment-Model Analysis and Experimental Verification

Inversion of gas hydrate saturation and solid frame permeability in a gas hydrate-bearing sediment by Stoneley wave attenuation

Methane Flux Effect on Hydrate Formation and Its Acoustic Responses in Natural Sands

Experimental Insights Into the In Situ Formation and Dissociation of Gas Hydrate in Sediments of Shenhu, South China Sea

Effects of hydrate occurring mechanisms and saturation on the mechanical properties of hydrate-bearing sediments: Numerical study based on simplified DEM simulation

Dependence of acoustic properties on hydrate-bearing sediments with heterogeneous distribution

Characterization of Coexistence of Gas Hydrate and Free Gas Using Sonic Logging Data in the Shenhu Area, South China Sea

Wave Propagation Characteristics in Gas Hydrate-Bearing Sediments and Estimation of Hydrate Saturation

Review and Outlook of Visual and Geophysical Detections for the Pore-Scale Morphology of Gas Hydrates

Experimental study of the velocity and resistivity variations along with methane hydrate saturation in unconsolidated sediments

Introducing Realistic Distributions of Gas Bubble Size and Inclusion Aspect Ratio to Model the Coexistence of Gas Hydrate and Free Gas

An Experimental Study from the South China Sea

Effect of Hydrate Distribution on the Mechanical Response of Hydrate-Bearing Sand: Discrete Element Method Simulation

Effect of Gas Hydrate Formation and Dissociation on Porous Media Structure with Clay Particles

Synergistic Elastic and Electrical Modeling for Quantitative Analysis of Gas Hydrate Formation Evolution in Pores

Physical Characteristic Analysis of Unconsolidated Sediments Containing Gas Hydrate Recovered from the Shenhu Area of the South China Sea

Numerical Simulation of Direct Shear Tests on Gas Hydrate-Bearing Sediments Using the Discrete Element Method

Influence of gas hydrate saturation and pore habits on gas relative permeability in gas hydrate-bearing sediments: Theory, experiment and case study